While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
These don't need to be documented, most of the time they are obvious,
when they aren't the behavior can just be described in the command
description.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
- Generate index entries automatically
- Remove manual command index entries
- Clean up a few other manual index entries
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Modify code to add JSON format output in show command.
"show ip igmp [vrf NAME] join" and "show ip igmp vrf all join" with proper formatting
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
This command has been added in the context of
PIM BSM functionality. This command will clear the
data structs having bsr information.
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Many index entries used '[no] xxx' or 'no xxx', some had both
positive and 'no' forms. Clean that up mostly - index positive
form of commands only.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
With the change of Solaris going from Supported -> UnSupported
the documentation needed to be updated to reflect the reality
on the ground.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
Added json support for the following PIM commands.
1. show ip mroute [vrf NAME] count [json]
2. show ip mroute vrf all count [json]
3. show ip mroute [vrf NAME] summary [json]
4. show ip mroute vrf all summary [json]
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Added a new show command "show ip multicast", display the multicast data
packet in and out on interface level.
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue: no ip msdp mesh-group <word> source command
deleting the mesh group, which might be used by the member.
Solution: no ip msdp mesh-group <word> source command, deletes
the mesh-group source.
Add a new cli command "no ip msdp mesh-group <word>" to delete
the mesh group.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. show ip pim mlag summary
provides MLAG session information and stats
2. show ip pim mlag upstream
displays the upstream entries synced across the MLAG switches
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The FRR community keeps getting asked about what is supported or not.
Try to clarify in an additional spot what is and what is not supported.
Where people interested in using PIM might have a chance at actually
seeing the notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow 'ip igmp join' to join group for any source if no source is
specified.
Disallow joining source "0.0.0.0" as it is used to define an
any-source multicast group.
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
Modification of the documentation for the `ip pim sm` command in order to avoid the understanding of an incompatibility with IGMP on the interface.
Signed-off-by: Alexis Royer <alexis.royer@gmail.com>
Fix details :
Added a utility cli to generate a igmp query on an interface.
This won't impact the existing query generation based on the
general query interval.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Simple documentation update for the new `clear ip mroute [vrf NAME] count`
command to the FRRouting documentation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introduce new cli commands ip igmp last-member-query-count <1-7>
ip igmp last-member-query-interval <1-255> deciseconds.
Display the config in show running config and show ip igmp interface
Signed-off-by: Sarita Patra <saritap@vmware.com>
Introduced a new command "show ip mroute summary"
to display total number of (*, G) and (S, G) mroutes
created and number of mroutes installed in the kernel.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The PIM-EVPN doc was not rendering very well on the
website. So Update documentation to allow it to render
better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
