When pim is creating an upstream for a S,G that it has received
*but* it has not received a route to the S, the oil is not
scanned to see if it should inherit anything from the *,G
that may be present when it cannot find the correct iif to
use. When the nexthop tracking actually
resolves the route, the oil is never rescanned and the
S,G stream will be missing a correct oil list leading
to absolute mayhem in the network.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a pim vxlan S,G is created, the code attempts to send out a NULL
register. This is used to build the S,G tree from the RP to the
FHR. Upon initial startup it is not unusual for the pim vxlan state
be fully ready to go but the RP is still not reachable. Let's add
a bit of a pump prime that allows the vxlan code to re-attempt to
send the null register for vxlan S,G's that the RP's outgoing
interface changed from unknown to an actual interface.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Upon startup the pim vxlan code initiates a pim null register
send for the S,G and sends a *,G join towards the RP at the same
time. Since a S,G upstream is created in the vxlan code with
the appropriate flags, the *,G join has the embedded S,G RPT
Prune. When an intermediate route receives this *,G RPT Prune
it creates a blackhole S,G route since this particular intermediate
router has not received a join from the RP yet( say the packet is
lost, or that part of the network is slower coming up ).
Let's try to intelligently decide that the S,G RPT Prune
should not be sent as part of the *,G join until the actual
S,G join from the RP reaches this box. Then we can make
intelligent decisions about whether or not to send it
out.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Setup:
------
R1( LHR) ---------R2( RP) ----------R3( FHR)
Problem:
-------
- Send IGMP/MLD join and traffic.
LHR: (S,G) mroute is created with reference count = 2
and set the flag SRC_STREAM.
(Code flow: pim_mroute_msg_wholepkt -> pim_upstream_add,
pim_upstream_sg_running_proc -> pim_upstream_ref)
- Send IGMP/MLD prune.
LHR: removes (*,G) entry and it tries to remove childen (S,G) entries.
But (S,G) is having reference count = 2. So after prune,
(S,G) entry reference count becomes 1 and will be present
until KAT expires.
Fix:
---
Don't set SRC_STREAM flag for LHR.
In LHR, (S,G) should be maintained, until (*,G) is present.
When prune receives delete (*,G) and children (S,G).
When traffic stops, delete (S,G) after KAT expires.
Issue: #13893
Signed-off-by: Sarita Patra <saritap@vmware.com>
Include an event ptr-to-ptr in the event_execute() api
call, like the various schedule api calls. This allows the
execute() api to cancel an existing scheduled task if that
task is being executed inline.
Signed-off-by: Mark Stapp <mjs@labn.net>
pim_addr_dump would dump the group data as a v4 or v6 address
let's just convert to our internal printf handler.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While running MLD conformance test 9.2 core is getting generated.
Test setps:
1. ANVL: Listen (for upto <GeneralQueryRecvWaitTime> seconds) on <AIface-0>.
2. DUT: Send MLD General Query Message.
3. ANVL: Send MLD Report Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of HOST-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>.
4. ANVL: Wait for <ProcessTime> seconds for DUT to process and add <Mcas- tAddrGroup> to its Multicast Address list.
5. ANVL: Send MLD General Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1 which is numerically less than the link-local IPv6 unicast address of <DIface-0>
• IPv6 Destination Address field set to link-scope all-nodes multicast address.
6. ANVL: Send MLD Multicast-Address-Specific Query Message to <DIface-0> containing:
• IPv6 Source Address field set to link-local IPv6 Address of RTR-1
• IPv6 Destination Address field set to <McastAddrGroup>
• MLD Multicast Address field set to <McastAddrGroup>
• MLD Maximum Response Delay field value set to 0.
7. ANVL: Verify that the Maximum Response Delay timer for <McastAd- drGroup> is set to zero.
While running above test, when group specific query is received we start gm_t_sg_expire timer.
Once this timer expires, we clear the corresponding entry.
During this sg->state was still set to JOIN. This happened because receiver went down without sending leave.
Added a condition to update the sg->state before starting the timer.
If receiver goes down without sending leave we will update sg->state to GM_SG_JOIN_EXPIRING or GM_SG_NOPRUNE_EXPIRING based on previous state.
If we receive a join then sg->state will be refreshed and will be updated to JOIN state.
Fixes: #13387
Signed-off-by: Abhishek N R <abnr@vmware.com>
The cli "show ip pim nexthop json" gives the RPF information.
However it doesn't give PIM enable status on the nexthop interface.
Added pimEnabled field in this clis,
this will tell if PIM is enabled or not on the nexthop interface.
Example:
frr# show ip pim nexthop
Number of registered addresses: 1
Address Interface Nexthop
108.0.0.2 ens224 108.0.0.2
frr# show ip pim nexthop json
{
"108.0.0.2":{
"address":"108.0.0.2",
"nexthops":[
{
"interface":"ens224",
"pimEnabled":true,
"nexthop":"108.0.0.2"
}
]
}
}
frr# configure terminal
frr(config)# int ens224
frr(config-if)# no ip pim
frr(config-if)# end
frr# show ip pim nexthop json
{
"108.0.0.2":{
"address":"108.0.0.2",
"nexthops":[
{
"interface":"ens224",
"pimEnabled":false,
"nexthop":"108.0.0.2"
}
]
}
}
Signed-off-by: Sarita Patra <saritap@vmware.com>
This commit ensures proper cleanup by deleting the gm_join_list when a PIM interface is deleted. The gm_join_list was previously not being freed, causing a memory leak.
The ASan leak log for reference:
```
***********************************************************************************
Address Sanitizer Error detected in multicast_mld_join_topo1.test_multicast_mld_local_join/r1.asan.pim6d.28070
=================================================================
==28070==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 40 byte(s) in 1 object(s) allocated from:
#0 0x7f3605dbfd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x56230373dd6b in qcalloc lib/memory.c:105
#2 0x56230372180f in list_new lib/linklist.c:49
#3 0x56230361b589 in pim_if_gm_join_add pimd/pim_iface.c:1313
#4 0x562303642247 in lib_interface_gmp_address_family_static_group_create pimd/pim_nb_config.c:2868
#5 0x562303767280 in nb_callback_create lib/northbound.c:1235
#6 0x562303767280 in nb_callback_configuration lib/northbound.c:1579
#7 0x562303768a1d in nb_transaction_process lib/northbound.c:1710
#8 0x56230376904a in nb_candidate_commit_apply lib/northbound.c:1104
#9 0x5623037692ba in nb_candidate_commit lib/northbound.c:1137
#10 0x562303769dec in nb_cli_classic_commit lib/northbound_cli.c:49
#11 0x56230376fb79 in nb_cli_pending_commit_check lib/northbound_cli.c:88
#12 0x5623036c5bcb in cmd_execute_command_real lib/command.c:991
#13 0x5623036c5f1b in cmd_execute_command lib/command.c:1053
#14 0x5623036c6392 in cmd_execute lib/command.c:1221
#15 0x5623037e75da in vty_command lib/vty.c:591
#16 0x5623037e7a74 in vty_execute lib/vty.c:1354
#17 0x5623037f0253 in vtysh_read lib/vty.c:2362
#18 0x5623037db4e8 in event_call lib/event.c:1995
#19 0x562303720f97 in frr_run lib/libfrr.c:1213
#20 0x56230368615d in main pimd/pim6_main.c:184
#21 0x7f360461bc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 192 byte(s) in 4 object(s) allocated from:
#0 0x7f3605dbfd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x56230373dd6b in qcalloc lib/memory.c:105
#2 0x56230361b91d in gm_join_new pimd/pim_iface.c:1288
#3 0x56230361b91d in pim_if_gm_join_add pimd/pim_iface.c:1326
#4 0x562303642247 in lib_interface_gmp_address_family_static_group_create pimd/pim_nb_config.c:2868
#5 0x562303767280 in nb_callback_create lib/northbound.c:1235
#6 0x562303767280 in nb_callback_configuration lib/northbound.c:1579
#7 0x562303768a1d in nb_transaction_process lib/northbound.c:1710
#8 0x56230376904a in nb_candidate_commit_apply lib/northbound.c:1104
#9 0x5623037692ba in nb_candidate_commit lib/northbound.c:1137
#10 0x562303769dec in nb_cli_classic_commit lib/northbound_cli.c:49
#11 0x56230376fb79 in nb_cli_pending_commit_check lib/northbound_cli.c:88
#12 0x5623036c5bcb in cmd_execute_command_real lib/command.c:991
#13 0x5623036c5f1b in cmd_execute_command lib/command.c:1053
#14 0x5623036c6392 in cmd_execute lib/command.c:1221
#15 0x5623037e75da in vty_command lib/vty.c:591
#16 0x5623037e7a74 in vty_execute lib/vty.c:1354
#17 0x5623037f0253 in vtysh_read lib/vty.c:2362
#18 0x5623037db4e8 in event_call lib/event.c:1995
#19 0x562303720f97 in frr_run lib/libfrr.c:1213
#20 0x56230368615d in main pimd/pim6_main.c:184
#21 0x7f360461bc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 96 byte(s) in 4 object(s) allocated from:
#0 0x7f3605dbfd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x56230373dd6b in qcalloc lib/memory.c:105
#2 0x562303721651 in listnode_new lib/linklist.c:71
#3 0x56230372182b in listnode_add lib/linklist.c:92
#4 0x56230361ba9a in gm_join_new pimd/pim_iface.c:1295
#5 0x56230361ba9a in pim_if_gm_join_add pimd/pim_iface.c:1326
#6 0x562303642247 in lib_interface_gmp_address_family_static_group_create pimd/pim_nb_config.c:2868
#7 0x562303767280 in nb_callback_create lib/northbound.c:1235
#8 0x562303767280 in nb_callback_configuration lib/northbound.c:1579
#9 0x562303768a1d in nb_transaction_process lib/northbound.c:1710
#10 0x56230376904a in nb_candidate_commit_apply lib/northbound.c:1104
#11 0x5623037692ba in nb_candidate_commit lib/northbound.c:1137
#12 0x562303769dec in nb_cli_classic_commit lib/northbound_cli.c:49
#13 0x56230376fb79 in nb_cli_pending_commit_check lib/northbound_cli.c:88
#14 0x5623036c5bcb in cmd_execute_command_real lib/command.c:991
#15 0x5623036c5f1b in cmd_execute_command lib/command.c:1053
#16 0x5623036c6392 in cmd_execute lib/command.c:1221
#17 0x5623037e75da in vty_command lib/vty.c:591
#18 0x5623037e7a74 in vty_execute lib/vty.c:1354
#19 0x5623037f0253 in vtysh_read lib/vty.c:2362
#20 0x5623037db4e8 in event_call lib/event.c:1995
#21 0x562303720f97 in frr_run lib/libfrr.c:1213
#22 0x56230368615d in main pimd/pim6_main.c:184
#23 0x7f360461bc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f3605dbfd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x56230373dd6b in qcalloc lib/memory.c:105
#2 0x56230361b91d in gm_join_new pimd/pim_iface.c:1288
#3 0x56230361b91d in pim_if_gm_join_add pimd/pim_iface.c:1326
#4 0x562303642247 in lib_interface_gmp_address_family_static_group_create pimd/pim_nb_config.c:2868
#5 0x562303767280 in nb_callback_create lib/northbound.c:1235
#6 0x562303767280 in nb_callback_configuration lib/northbound.c:1579
#7 0x562303768a1d in nb_transaction_process lib/northbound.c:1710
#8 0x56230376904a in nb_candidate_commit_apply lib/northbound.c:1104
#9 0x5623037692ba in nb_candidate_commit lib/northbound.c:1137
#10 0x562303769dec in nb_cli_classic_commit lib/northbound_cli.c:49
#11 0x56230376fb79 in nb_cli_pending_commit_check lib/northbound_cli.c:88
#12 0x5623036c5bcb in cmd_execute_command_real lib/command.c:991
#13 0x5623036c5f6f in cmd_execute_command lib/command.c:1072
#14 0x5623036c6392 in cmd_execute lib/command.c:1221
#15 0x5623037e75da in vty_command lib/vty.c:591
#16 0x5623037e7a74 in vty_execute lib/vty.c:1354
#17 0x5623037f0253 in vtysh_read lib/vty.c:2362
#18 0x5623037db4e8 in event_call lib/event.c:1995
#19 0x562303720f97 in frr_run lib/libfrr.c:1213
#20 0x56230368615d in main pimd/pim6_main.c:184
#21 0x7f360461bc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
Indirect leak of 24 byte(s) in 1 object(s) allocated from:
#0 0x7f3605dbfd28 in __interceptor_calloc (/usr/lib/x86_64-linux-gnu/libasan.so.4+0xded28)
#1 0x56230373dd6b in qcalloc lib/memory.c:105
#2 0x562303721651 in listnode_new lib/linklist.c:71
#3 0x56230372182b in listnode_add lib/linklist.c:92
#4 0x56230361ba9a in gm_join_new pimd/pim_iface.c:1295
#5 0x56230361ba9a in pim_if_gm_join_add pimd/pim_iface.c:1326
#6 0x562303642247 in lib_interface_gmp_address_family_static_group_create pimd/pim_nb_config.c:2868
#7 0x562303767280 in nb_callback_create lib/northbound.c:1235
#8 0x562303767280 in nb_callback_configuration lib/northbound.c:1579
#9 0x562303768a1d in nb_transaction_process lib/northbound.c:1710
#10 0x56230376904a in nb_candidate_commit_apply lib/northbound.c:1104
#11 0x5623037692ba in nb_candidate_commit lib/northbound.c:1137
#12 0x562303769dec in nb_cli_classic_commit lib/northbound_cli.c:49
#13 0x56230376fb79 in nb_cli_pending_commit_check lib/northbound_cli.c:88
#14 0x5623036c5bcb in cmd_execute_command_real lib/command.c:991
#15 0x5623036c5f6f in cmd_execute_command lib/command.c:1072
#16 0x5623036c6392 in cmd_execute lib/command.c:1221
#17 0x5623037e75da in vty_command lib/vty.c:591
#18 0x5623037e7a74 in vty_execute lib/vty.c:1354
#19 0x5623037f0253 in vtysh_read lib/vty.c:2362
#20 0x5623037db4e8 in event_call lib/event.c:1995
#21 0x562303720f97 in frr_run lib/libfrr.c:1213
#22 0x56230368615d in main pimd/pim6_main.c:184
#23 0x7f360461bc86 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x21c86)
SUMMARY: AddressSanitizer: 400 byte(s) leaked in 11 allocation(s).
***********************************************************************************
```
Signed-off-by: Keelan Cannoo <keelan.cannoo@icloud.com>
Problem:
ANVL Conformance test case 7.31 failed because DUT after
receiving MLD Done msg and a query message with lower adddress,
DUT did not keep on sending the group specific queries since it moved
to non-querier state.
As per RFC 2710 s4 p7, DUT is supposed to keep sending the group
specific queries until either it receives the membership report or
there is no response even after last member query is sent.
Fix:
Whenever group specific queries are sent out we are checking if
the self node is querier, if not it does not sends this query out.
This check is preventing the continuation of the last queries
which must be sent out although the self node is not the querier.
Hence removing the check from the api gm_trigger_specific_query
and adding in the caller to make sure this event is only added
for queriers. This will make sure the last member queries are sent out
even during the transition phase.
Also earlier this event was getting added for non-querier
as well which is redundant since queries were not required to be sent
out by non-queriers.
Issue: #13539
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Problem:
When ipv6 pim configuration is removed from the IIF on FHR node,
if we wait for RST timer to expire and then add the ipv6 pim configuration on the IIF again,
it is seen that pimreg is not getting added due to which null register wont be sent,
the register flag state also remains NO_INFO forever instead of RegPrune.
The reason for this is, when RST timer expires and IIF is unknown for the (S,G) upstream,
the FHR state is not reset due to which when the RP becomes reachable,
upstream state changes from NotJoined to Join but the register suppress timer could not be started
since we see there is no change in FHR state.
Fix:
When the Register Timer expires and the reg state is set to PIM_REG_NOINFO,reset the FHR flag,
so that when the RP becomes reachable can be because of config change or RP not reachable,
it is able to resume its duty.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
We were using the pim interface socket to send the register
stop msg, it works fine in cases where the interface on which
register msg is received and the interface on which the register-stop
msg is supposed to be sent is the same.
But when the interfaces are different, msg send fails because
the outgoing interface is not right.
Fixes: #13774
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Max response time in the code is being used as decisecond but the user input is taken in millisecond.
Also yang expects the field to be in decisecond.
The below condition in yang is failing due to the mismatch in units.
```
units deciseconds;
must ". <= ../query-interval * 10";
```
Issue: #11892
Signed-off-by: Abhishek N R <abnr@vmware.com>
Problem:
-------
The cli "show ipv6 pim state" is not displaying when outgoing
interface list is empty.
This is fixed now.
Before Fix:
----------
frr# show ipv6 pim state json
{
"ffaa::5":{
"1100::10":{
"ens224":{
},
"installed":1,
"isRpt":false,
"refCount":1,
"oilListSize":0,
"oilRescan":0,
"lastUsed":0,
"packetCount":40,
"byteCount":3080,
"wrongInterface":1
}
}
}
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
After fix:
---------
Case 1:
- "show ipv6 pim state" output for 1 mroute with 1 oil.
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224 ens256( J )
Case 2:
- "show ipv6 pim state" output for 1 mroute with multiple oil.
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224 ens192( J )
ens256( J )
Case 3:
- "show ipv6 pim state" output for 1 mroute with no oil
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 1100::10 ffaa::5 n ens224
Case 4:
- "show ipv6 pim state" output for multiple mroute with multiple oil
frr# show ipv6 pim state
Codes: J -> Pim Join, I -> MLD Report, S -> Source, * -> Inherited from (*,G), V -> VxLAN, M -> Muted
Active Source Group RPT IIF OIL
1 * ff05::2 y ens224 pim6reg(I )
ens192(I )
1 * ffaa::5 y ens224 pim6reg(I )
ens192(I )
Issue: #13070
Signed-off-by: Sarita Patra <saritap@vmware.com>
The vrf name should be separated when it is displayed. And remove
unnecessary space after number.
Before:
```
pim_upstream_sg_running: (100.100.1.100,232.100.100.100)x is not installed in mroute
pim_upstream_del(pim_ifchannel_delete): Delete (100.100.1.100,232.100.100.100)[x] ref count: 1 , flags: 1048585 c_oil ref count 2 (Pre decrement)
```
After:
```
pim_upstream_sg_running: (100.100.1.100,232.100.100.100)[x] is not installed in mroute
pim_upstream_del(pim_ifchannel_delete): Delete (100.100.1.100,232.100.100.100)[x] ref count: 1, flags: 1048585 c_oil ref count 2 (Pre decrement)
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Consider LHR in `SSM` case, and its `oif` goes from up to down.
As the `oif` changes down, the `channel_oil` is still wrongly reserved
with `PIM_OIF_FLAG_PROTO_STAR` protocol.
The mechanism of adding `STAR` protocol for <S,G> entry without `oif`
is introduced by commit `2164ed5`, which should be only used for ASM.
PR #13699 wants to clean this `STAR` protocol after the `oif` becomes up
again. That case is for SSM, as the `oif` changes down, the `channel_oil`
should be removed, so the fix of that PR is wrong.
In `pim_ifchannel_delete()` we should check the `ch->parent` before that
mechanism of adding `STAR` protocol. If `ch->parent` is NULL, we should
skip that mechanism with SSM.
Fixes#13696
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Move the mld/igmp deletion common code to api pim_gm_interface_delete
code for IPv6 deletion(gm_ifp_teardown) for MLD was missing in this flow
Making the code common fixes this too.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Rename pim_cmd_interface_delete to pim_pim_interface_delete
and move the api to pimd/pim_iface.c
Changed the return type of the api from int to void.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Move pim_if_membership_clear api from pimd/pim_nb_config.c
to pimd/pim_iface.c
Also fixed curly braces warning
WARNING: braces {} are not necessary for single statement blocks
1773: FILE: /tmp/f1-127504/pim_iface.c:1773:
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Receiver---LHR---RP
Problem:
In LHR, ipv6 pim state remains after MLD prune received.
Root Cause:
When LHR receives join, it creates (*,G) channel oil with
oil_ref_count = 2. The channel_oil is used by gm_sg sg->oil
and upstream->channel_oil.
When LHR receives prune, currently upstream->channel_oil is
deleted and gm_sg sg->oil still present. Due to this channel_oil
is still present with oil_ref_count = 1
Fix:
When LHR receives prune, upstream->channel_oil and pim_sg sg->oil
needs to be deleted.
Issue: #11249
Signed-off-by: Sarita Patra <saritap@vmware.com>
Currently, in PIM Northbound, when a path to RP is not found during config apply, we are treating this as a NB_ERR_INCONSISTENCY.
However, there are two issues with this approach:
When OSPF or IGP convergence is completed, it is possible that the RPF check will succeed.
If we have multiple groups and RPs (e.g. 50 RPs), we will receive 50 logs with inconsistency errors.
example:
2023/05/27 22:57:45 PIM: [G822R-SBMNH] config-from-file# ip pim rp 192.168.100.1 239.100.0.0/28 2023/05/27 22:57:45
PIM: [VAKV3-NMY7B][EC 100663337] error processing configuration change: error [internal inconsistency] event [apply]
operation [create] xpath [/frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-pim:pimd']
[name='pim'][vrf='default']/frr-pim:pim/address-family[address-family='frr-routing:ipv4']/frr-pim-rp:rp/static-rp/rp-list
[rp-address='192.168.100.1']/group-list[.='239.100.0.0/28']] message: No Path to RP address specified: 192.168.100.1
Issue: #13620
Signed-off-by: Rajesh Varatharaj <rvaratharaj@nvidia.com>
Problem:
Execute the below commands, pim6d core happens.
interface ens193
ip address 69.0.0.2/24
ipv6 address 8000::1/120
ipv6 mld
ipv6 pim
We see crash only if the interface is not configured, and
we are executing PIM/MLD commands.
RootCause:
Interface ens193 is not configured. So, it will have
ifindex = 0 and mroute_vif_index = -1.
Currently, we don't enable MLD on an interface if
mroute_vif_index < 0. So, pim_ifp->MLD = NULL.
In the API pim_if_membership_refresh(), we are accessing
pim_ifp->MLD NULL pointer which leads to crash.
Fix:
Added NULL check before accessing pim_ifp->MLD pointer in
the API pim_if_membership_refresh().
Issue: #13385
Signed-off-by: Sarita Patra <saritap@vmware.com>
`pim_if_create_pimreg()` need use the `mroute_socket`, so adjust the order.
First call `pim_mroute_socket_enable()`, then call `pim_if_create_pimreg()`.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When entering some show commands that use json in pimd
when the interface cannot be found do not output non-json
format in that case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Assume that `pim_ifp` has two ip (v4) addresses, one is primary, the other
is secondary. After remove primary ip, the secondary ip doesn't be promoted,
so `pim_ifp->primary_address` will wrongly be set to "0.0.0.0", it leads to
`pim_sock_delete(ifp)` on this interface.
Add the promotion for primary address.
Fixed#13590
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Some interfaces are special, they have the same `ifindex` with pimreg.
Use macro for `ifindex` of pimreg.
And adjust log.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
`setsockopt()` should be only called once with `MRT_TABLE`
in "enable" case, otherwise it will fail. In current code,
`mroute_socket` of "pim instance" with VRF can't be correctly
closed.
Skip it in the "disable" case to let `mroute_socket` safely
closed.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Coverity complains about these being tainted/untrusted loop boundaries.
The way the code works, it's counting up groups/sources, but keeps
checking against remaining data length in the packet - which is
perfectly fine IMHO. Except Coverity doesn't understand it :(
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
