Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Unfortunately as the topotests show a fast recovery after failure
detection due to BFD is currently not possible because of the following
issue:
There are multiple scheduling mechanisms within isisd to prevent
overload situations. Regarding our problem these two are important:
* scheduler for regenerating ISIS Link State PDUs scheduler for managing
* consecutive SPF calculations
In fact both schedulers are coupled, the first one triggers the second
one, which again is triggered by isis_adj_state_change (which again is
triggered by a BFD 'down' message). The re-calculation of SPF paths
finally triggers updates in zebra for the RIB.
Both schedulers work as a throttle, e.g. they allow the regeneration of
Link State PDUs or a re-calculation for SPF paths only once within a
certain time interval which is configurable (and by default different!).
This means that a request can go through the first scheduler but might
still be 'stuck' at the second one for a while. Or a request can be
'stuck' at the first scheduler even though the second one is ready. This
also explains the 'random' behaviour one can observe testing since a
'fast' recovery is only possible if both schedulers are ready to process
this request.
Note that the solution in this commit is 'thread safe' in the sense that
both schedulers use the same thread master such that the introduced
flags are only used exactly one time (and one after another) for a
'fast' execution.
Further there are some irritating comments and logs which I partially
removed. They seems to be not valid anymore due to changes in thread
management (or they were never valid in the first place).
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Segment Routing Local Block (SRLB) is part of RFC8667. This change introduces
the possibility for isisd to advertize SRLB in LSP. Base and Range of SRLB
could be configured through CLI or Yang.
Adjacency-SID are now using this SRLB for label allocation. SRLB could also
be used for SID-Binding (e.g. LDP to SR).
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is an implementation of the IS-IS SR draft [1] for FRR.
The following features are supported:
* IPv4 and IPv6 Prefix-SIDs;
* IPv4 and IPv6 Adj-SIDs and LAN-Adj-SIDs;
* Index and absolute labels;
* The no-php and explicit-null Prefix-SID flags;
* Full integration with the Label Manager.
Known limitations:
* No support for Anycast-SIDs;
* No support for the SID/Label Binding TLV (required for LDP interop).
* No support for persistent Adj-SIDs;
* No support for multiple SRGBs.
[1] draft-ietf-isis-segment-routing-extensions-25
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Rearrange the isisd northbound callbacks as following:
* isis_nb.h: prototypes of all northbound callbacks.
* isis_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* isis_nb_config.c: implementation of YANG configuration nodes.
* isis_nb_state.c: implementation of YANG state nodes.
* isis_nb_notifications.c: implementation of YANG notifications.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In preparation to Segment Routing:
- Update the management of Traffic Engineering subTLVs to the new tlvs parser
- Add Router Capability TLV 242 as per RFC 4971 & 7981
- Add Segment Routing subTLVs as per draft-isis-segment-routing-extension-25
Modified files:
- isis_tlvs.h: add new structure to manage TE subTLVs, TLV 242 & SR subTLVs
- isis_tlvs.c: add new functions (pack, copy, free, unpack & print) to process
TE subTLVs, Router Capability TLV and SR subTLVs
- isis_circuit.[c,h] & isis_lsp.[c,h]: update to new subTLVs & TLV processing
- isis_te.[c,h]: remove all old TE structures and managment functions,
and add hook call to set local and remote IP addresses as wellas update TE
parameters
- isis_zebra.[c,h]: add hook call when new interface is up
- isis_mt.[c,h], isis_pdu.c & isis_northbound.c: adjust to new TE subTLVs
- tests/isisd/test_fuzz_isis_tlv_tests.h.gz: adapte fuuz tests to new parser
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Historically, isisd has been carrying around its own red-black tree to
manage its LSP DB in. This replaces that with the newly-added
DECLARE_RBTREE_*. This allows completely removing the dict_* code.
Signed-off-by: David Lamparter <equinox@diac24.net>
Solve issue #4032
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te from global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Change MPLS-TE from global to per Area
- Add new mpls_te_area structure to area in replacement of global variable
isisMPLS_TE
- Move mpls-te frmo global to instance in frr-isisd.yang
- Change code in isis_te.c, isis_northbound.c, isis_cli.c, isis_pdu.c,
isis_lsp.c and isis_zebra.c accordingly
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Since LSP fragments are also on our lspdb dict, lsp_tick() needs to skip
over them after calling lsp_destroy(). Otherwise it ends up accessing
free'd memory.
Fixes: #3533
Signed-off-by: David Lamparter <equinox@diac24.net>
When receiving an LSP with same sequence number but different
checksum as in the local database, we would always treat it as
newer than the local LSP.
That behavior is incorrect if the local LSP is indeed a purged
LSP waiting for age-out and the received one is not.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Purged fragments would always be reoriginated by isisd. They
should only be purged once and never be reoriginated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When `first` would be initialized to the same value as `last`, the
function would return incorrect results.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
It turns out 50ms is actually too short to aggregate all changes
in some cases, so allow for 100ms.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When there is a stream of events coming in, where IS-IS learns
about a lot of updates, IS-IS would regenerate its LSPs before
the updates have been processed completely.
This causes suboptimal convergence because the intermediate state
will be flooded. Only after the configured `lsp_gen_interval`, a
new update with the correct and final state will be generated.
Resolve this by holding off LSP generation while there are still
events coming in.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lsp_l1_refresh and lsp_l2_refresh are identical apart from the
hardcoded IS-IS level they are referring to. So merge them and
pass the level as part of the argument.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
For debugging the timing of LSP generation, it is useful to know
which event caused a regeneration to be scheduled. Therefore, add
this information to the debug log.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
IS-IS would ignore any area lsp-mtu setting configured after initial
creation of the LSP since move to the new tlv serialized/deserializer.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
isisd would crash when lsp fragments aged out, since they got freed
correctly, but were not removed from LSP0's linked list of fragments.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Regular IS-IS will flood any LSP updates out to all circuits except the
one where it was received on. This is done in `lsp_flood`.
Change `lsp_flood` for fabricd to use the optimized flooding algorithm
instead.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Before this commit, isisd/fabricd maintained a bitfield for each LSP
to track the SRM bit for each circuit, which specifies whether an LSP
needs to be sent on that circuit. Every second, it would scan over all
LSPs in `lsp_tick` and queue them up for transmission accordingly.
This design has two drawbacks: a) it scales poorly b) it adds
unacceptable latency to the update process: each router takes a random
amount of time between 0 and 1 seconds to forward an update. In a
network with a diamter of 10, it might already take 10 seconds for an
update to traverse the network.
To mitigate this, a new design was chosen. Instead of tracking SRM in a
bitfield, have one tx_queue per circuit and declare that an LSP is in
that queue if and only if it would have SRM set for that circuit.
This way, we can track SRM similarly as we did before, however, on
insertion into the LSP queue, we can add a timer for (re)transmission,
alleviating the need for a periodic scan with LSP tick and reducing the
latency for forwarding of updates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To avoid passing of traffic via leaf nodes in the fabric, OpenFabric
specifies that all links towards tier 0 nodes should be advertised with
a very high metric.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
While OpenFabric calculates most tier numbers automatically by the
fabric locality calculation algorithm, that algorithm requires two
systems to be manually configured as tier 0, so it has reference points.
Also, completely manual configuration is possible.
To support this, introduce appropriate CLI commands and flood the
configured information.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric changes IS-IS's initial database synchronization. While
regular IS-IS will simultaneuously exchange LSPs with all neighboring
routers during startup, this is considered too much churn for a densely
connected fabric.
To mitigate this, OpenFabric prescribes that a router should only
bring up an adjacency with a single neighbor and perform a full
synchronization with that neighbor, before bringing up further
adjacencies.
This is implemented by having a field `initial_sync_state` in the
fabricd datastructure which tracks whether an initial sync is still
pending, currently in progress, or complete.
When an initial sync is pending, the state will transition to the
in-progress state when the first IIH is received.
During this state, all IIHs from other routers are ignored. Any
IIHs transmitted on any link other than the one to the router with
which we are performing the initial sync will always report the far
end as DOWN in their threeway handshake state, avoiding the formation of
additional adjacencies.
The state will be left if all the SRM and SSN flags on the
initial-sync circuit are cleared (meaning that initial sync has
completed). This is checked in `lsp_tick`. When this condition occurrs,
we progress to the initial-sync-complete state, allowing other
adjacencies to form.
The state can also be left if the initial synchronization is taking too
long to succeed, for whatever reason. In that case, we fall back to the
initial-sync-pending state and will reattempt initial synchronization
with a different neighbor.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This correction fixes two bugs detected by Clang scan:
Bug Group: Dead store
Bug Type: Dead assignment
File: zebra/kernel_netlink.c
Function: netlink_parse_extended_ack
Line: 548
Bug Type: Dead increment
File: isisd/isis_lsp.c
Function: lsp_bits2string
Line: 625
Signed-off-by: F. Aragon <paco@voltanet.io>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
None of these variables can actually be used before being initialized,
but unfortunately some old compilers are not smart enough to detect that.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a timestamp information for level 2 circuits, otherwise if the
circuit is marked as already processed on level 1 we will not process
level 2 areas.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive or generate new versions of fragments which are
curently pending for age out, we need to ensure that they are correctly
linked to their lsp0.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Standard IS-IS only supports up to 256 fragments per router. Recognize
when the information we want to advertise exceeds 256 fragments and
print a warning in this case instead of overflowing the fragment counter
and overwriting existing LSP fragments.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- SPF is now per level only (no more per family)
- t_spf and pending removed from struct spftree and moved to
spf_timer field in struct isis_area
- show isis summary output changed to accomodate the per level SPF
- isis_spf_schedule6 and isis_run_spf6_lx functions are removed,
isis_run_spf_lx now calls isis_run_spf for both INET and INET6
- lsp related functions now call isis_spf_schedule only
