A particular flex-algo algorithm may remain in disabled state after
configuring it if its flex-algo definition is being spread in the area.
It happens sometimes that, in isis_sr_flex_algo_topo1 topotest, r3
flex-algo 203 is disabled on test8. It depends on the following
sequence on r3:
1. a LSP containing the flex-algo 203 definition is received from
either r1 or r2 (or both).
2. the local LSP is rebuilt by lsp_build() because of the flex-algo 203
configuration
3. isis_run_spf() recomputes the algo 203 SPF tree
A 1. 2. 3. sequence results in a working test whereas 2. 1. 3. is not
working. The second case issue is because of an inconsistent flex-algo
definition state between the following:
- in lsp_build(), isis_flex_algo_elected_supported_local_fad() returns
false because no flex-algo definition is known.
- in isis_run_spf(), isis_flex_algo_elected_supported() returns true
because a flex-algo definition is found.
Set a flex-algo state lsp_build() depending on flex-algo definition
existence that is used later in isis_run_spf().
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Deal with the packing and unpacking of following Flex-Algo
Sub-Sub-TLVs:
- Router Capability (already defined TLV 242)
- List of the Flex-Algo Definitions (Sub-TLV 26)
- Exclude admin group (Sub-Sub-TLV 1)
- Include-any admin group (Sub-Sub-TLV 2)
- Include-all admin group (Sub-Sub-TLV 3)
- Flags (for prefix-metric) (Sub-Sub-TLV 4)
This commit splits data into multiple router capability TLVs if needed
because a TLV cannot contains more than 255 bytes.
Note that the list of SR Algorithm (Sub-TLV 19) within Router Capability
(TLV 242) is already set in a previous commit.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Eric Kinzie <ekinzie@labn.net>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Refactor IP reachability lsp build to comply with checkpatch:
> WARNING: Too many leading tabs - consider code refactoring
No code logic change.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
isis_tlvs_add_extended_ip_reach adds IS-IS Extended
IP reachability to the LSP. In this case, if the
pcfg argument is not NULL, you can add IGP
Prefix-SID as its sub tlv.
Before this commit, only one Prefix-SID can be added.
After this commit, the argument is not a single
pointer but an array of pointers, and multiple
Prefix-SIDs can be added.
This feature is necessary because Flex-Algo
requires multiple Prefix-SIDs for each Algorithm.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Before this commit, SR_ALGORITHM_COUNT was set to 2,
and each was hardcoded with router capability tlv.
When Flex-Algo is supported, SR-Algorithm may be
variably supported up to 256.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The information in prefix-sid has a new property
called algorithm id. This is used to identify
the algorithm that separates it in the same IGP
network. This is used in Flex-Algo.In all other
cases, the algorithm id is basically 0.
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This path replaces isisd_format_id, sysid_print, snpa_print, rawlspid_print and
isonet_print functions by the new printfrr ISO System ID & Network Address
format facilities. It also updates the isisd code to the new iso_address
structure defined in lib/iso.h
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Before:
isisd generates its initial lsp before fully processing the written config. Ex: lsp_generate() is called in isis_instance_area_address_create(), before other configs that may affect the lsp are loaded in, like set-overload-bit.
After:
isisd generates its initial lsp as soon as the config is fully processed. This was done by utilizing the initialization config callbacks, similar to bgp's implementation.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
When creating a xfrm interface FRR is crashing when configured
with isis. This is because the weird pattern of not allocating
list's until needed and then allowing the crash when we have
a usage pattern that was not expected. Just always allocate
the different lists that a circuit needs.
(gdb) bt
(gdb)
Fixes#11432
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In order to provide Link State Traffic Engineering features to IS-IS, this
patch adds some modifications to base IS-IS:
- Solve bug in lsp iterate function to avoid infinite loop in isis_lsp.c by
adding condition to recurse call
- Add new trigger event to parse LSP in isis_lsp.c
- Add new TE debug flag to track Traffic Engineering events in isisd.[c,h]
- Correct small bug in isis_tlvs.c where delay and min/max delay are not
correctly handle
- Handle Opaque LSA Traffic Engineering Zebra API in isis_zebra.[c,h]
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Add advertisement of Global IPv6 address in IIH pdu
- Add new CLI to set IPv6 Router ID
- Add advertisement of IPv6 Router ID
- Correctly advertise IPv6 local and neighbor addresses in Extended IS and MT
Reachability TLVs
- Correct output of Neighbor IPv6 address in 'show isis database detail'
- Manage IPv6 addresses advertisement and corresponiding Adjacency SID when
IS-IS is not using Multi-Topology by introducing a new ISIS_MT_DISABLE
value for mtid (== 4096 i.e. first reserved flag set to 1)
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
There are two problems with the current code for processing the attached
bit:
- we should process it when acting both a level-1-only and level-1-2
- we should add the default route when we don't have L2 adjacensies, not
when we don't have other routers configured on the device
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Current code related to setting of the attached bit checks for existence
of L2 adjacencies in other routers configured on the device. This makes
no sense. We should check for L2 adjacencies in the same router where we
have L1 adjacencies.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, the dynamic hostname cache is global. It is incorrect because
neighbors in different VRFs may have the same system ID and different
hostnames.
This also fixes a memory leak - when the instance is deleted, the cache
must be cleaned up and the cleanup thread must be cancelled.
Fixes#8832.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Convert most DEFINE_MTYPE into the _STATIC variant, and move the
remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
no point in scheduling an LSP refresh immediately if we know it is
going to be postponed again due to the network still being in its
instability grace period
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
When adjacencies change state the attached-bits in LSPs in other areas
on the router may need to be modified.
1. If a router no longer has a L2 adjacency to another area the
attached-bit must no longer be sent in the LSP
2. If a new L2 adjacency comes up in a different area then the
attached-bit should be sent in the LSP
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
The purpose of the Attach-bit is to accomplish inter-area routing. In other
venders, the Attached-bit is automatically set when a router is configured
as a L1|L2 router and has two adjacencies. When a L1 router receives a LSP
with the Attached-bit set it is supposed to create a default route pointing
toward the neighbor to provide a default path out of the L1 area.
ISIS implementation has been fixed to support the above definition:
Setting the Attach-bit is now the default behavior and we allow the user to
turn it off.
We will only set the Default Attach-bit when creating a L1 LSP, if we are
a L1|L2 router and have a L2 adjacency up.
When a L1 router receives a LSP with the Attach-bit set, we will create a
default route pointing to the L1|L2 router as the nexthop.
The default route will be removed if the LSP is received with the Attach-bit
cleared.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The code in isisd uses `circuit->area->isis` all the time
but we know that circuit now has a valid `circuit->isis` pointer
so let's use that and cleanup the long dereference.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Iterating over all IP or IS reachability information from a given
LSP isn't a trivial task. That information is scattered throughout
different TLV types, and which ones need to be used depend on
multiple variables (e.g. the SPF tree address family, MT-ID,
etc). This not to mention that an LSP might consist of multiple
fragments.
Introduce the following two LSP iteration function to facilitate
obtaining IP/IS reachability information from a given LSP:
* isis_lsp_iterate_ip_reach()
* isis_lsp_iterate_is_reach()
These functions will be used extensively by the upcoming TI-LFA
code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
