Fix show nhrp shortcut json
Fixes: 87b9e98203 ("nhrpd: add json support to show nhrp vty commands")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Fully check the NHRP convergence after setting nhs1 down. Otherwise the
ping may pass because the previous shortcut is still present.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
After setting down nhs1, the test is checking that nhc1 routing table
matches routes in nhc1/nhrp_route.json. It is incorrect because it
checks that the NHRP route to nhs1 is still present but it should have
disappeared.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Rename router variables in nhrp_redundancy to match the actual name.
Cosmetic change to help debugging.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The expected prefix should be 5.5.5.0/24 otherwise the hosts behind NHRP
client 1 nhc1 (aka. r5) are not reachable via NHRP.
The issue was not seen in the FRR official CI because the tests were
skipped because iptables were missing in CI machines.
It solves the 16690 issue.
Fixes: https://github.com/FRRouting/frr/issues/16690
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Fix static-analyser warnings with BGP labels:
> $ scan-build make -j12
> bgpd/bgp_updgrp_packet.c:819:10: warning: Access to field 'extra' results in a dereference of a null pointer (loaded from variable 'path') [core.NullDereference]
> ? &path->extra->labels->label[0]
> ^~~~~~~~~
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
ifp->info is not always set in PIM. So add a guard here to stop
it from crashing when addresses are added to a non-PIM enabled interface
and PIM zebra debugging is enabled.
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
(cherry picked from commit 12a783d313)
The remote spoke always sends a 32 prefix length to a shortcut request.
In the example, the remote spoke as the IP address 192.168.2.1/24.
spoke1# sh ip nhrp shortcut
Type Prefix Via Identity
dynamic 192.168.2.1/32 10.255.255.2
Do not deal with local routes in nhrpd. Now:
spoke1# sh ip nhrp shortcut
Type Prefix Via Identity
dynamic 192.168.2.0/24 10.255.255.2
Fixes: d4aa24ba7d ("*: Introduce Local Host Routes to FRR")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit af54901405)
This test checks the bgp crash on rt2 when 2 commands
launched consequently:
T0: rr, config -> router bgp 65004 -> neighbor 192.168.12.2 password 8888
T1: rt2, snmpwalk -v 2c -c public 127.0.0.1 .1.3.6.1.4.1.7336.4.2.1
T2: test if rt2 bgp is crashed.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
(cherry picked from commit e23005f407)
When 'no rpki' is requested and the rtrlib RPKI object was freed, bgpd
is crashing.
RPKI is configured in VRF red.
> ip l set red down
> ip l del red
> printf 'conf\n vrf red\n no rpki' | vtysh
> Core was generated by `/usr/bin/bgpd -A 127.0.0.1 -M snmp -M rpki -M bmp'.
> Program terminated with signal SIGSEGV, Segmentation fault.
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> 44 ./nptl/pthread_kill.c: No such file or directory.
> [Current thread is 1 (Thread 0x7fb401f419c0 (LWP 190226))]
> (gdb) bt
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> #1 __pthread_kill_internal (signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:78
> #2 __GI___pthread_kill (threadid=140411103615424, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
> #3 0x00007fb4021ad476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
> #4 0x00007fb4025ce22b in core_handler (signo=11, siginfo=0x7fff831b2d70, context=0x7fff831b2c40) at lib/sigevent.c:248
> #5 <signal handler called>
> #6 rtr_mgr_remove_group (config=0x55fe8789f750, preference=11) at /build/make-pkg/output/source/DIST_RTRLIB/rtrlib/rtrlib/rtr_mgr.c:607
> #7 0x00007fb40145f518 in rpki_delete_all_cache_nodes (rpki_vrf=0x55fe8789f4f0) at bgpd/bgp_rpki.c:442
> #8 0x00007fb401463098 in no_rpki_magic (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at bgpd/bgp_rpki.c:1732
> #9 0x00007fb40145c09a in no_rpki (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at ./bgpd/bgp_rpki_clippy.c:37
> #10 0x00007fb402527abc in cmd_execute_command_real (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, up_level=0) at lib/command.c:984
> #11 0x00007fb402527c35 in cmd_execute_command (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, vtysh=0) at lib/command.c:1043
> #12 0x00007fb4025281e5 in cmd_execute (vty=0x55fe877f5130, cmd=0x55fe877fb8c0 "no rpki\n", matched=0x0, vtysh=0) at lib/command.c:1209
> #13 0x00007fb4025f0aed in vty_command (vty=0x55fe877f5130, buf=0x55fe877fb8c0 "no rpki\n") at lib/vty.c:615
> #14 0x00007fb4025f2a11 in vty_execute (vty=0x55fe877f5130) at lib/vty.c:1378
> #15 0x00007fb4025f513d in vtysh_read (thread=0x7fff831b5fa0) at lib/vty.c:2373
> #16 0x00007fb4025e9611 in event_call (thread=0x7fff831b5fa0) at lib/event.c:2011
> #17 0x00007fb402566976 in frr_run (master=0x55fe871a14a0) at lib/libfrr.c:1212
> #18 0x000055fe857829fa in main (argc=9, argv=0x7fff831b6218) at bgpd/bgp_main.c:549
Fixes: 8156765abe ("bgpd: Add `no rpki` command")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 4e053d65f1)
A crash happens when executing the following command:
> ubuntu2204hwe# conf
> ubuntu2204hwe(config)# router bgp 65500
> ubuntu2204hwe(config-router)# !
> ubuntu2204hwe(config-router)# address-family ipv4 unicast
> ubuntu2204hwe(config-router-af)# sid vpn export auto
> ubuntu2204hwe(config-router-af)# exit-address-family
> ubuntu2204hwe(config-router)# !
> ubuntu2204hwe(config-router)# address-family ipv4 vpn
> ubuntu2204hwe(config-router-af)# network 4.4.4.4/32 rd 55:55 label 556
> ubuntu2204hwe(config-router-af)# network 5.5.5.5/32 rd 662:33 label 232
> ubuntu2204hwe(config-router-af)# exit-address-family
> ubuntu2204hwe(config-router)# exit
> ubuntu2204hwe(config)# !
> ubuntu2204hwe(config)# no router bgp
The crash analysis indicates a memory item has been freed.
> #6 0x000076066a629c15 in mt_count_free (mt=0x56b57be85e00 <MTYPE_BGP_NAME>, ptr=0x60200038b4f0)
> at lib/memory.c:73
> #7 mt_count_free (ptr=0x60200038b4f0, mt=0x56b57be85e00 <MTYPE_BGP_NAME>) at lib/memory.c:69
> #8 qfree (mt=mt@entry=0x56b57be85e00 <MTYPE_BGP_NAME>, ptr=0x60200038b4f0) at lib/memory.c:129
> #9 0x000056b57bb09ce9 in bgp_free (bgp=<optimized out>) at bgpd/bgpd.c:4120
> #10 0x000056b57bb0aa73 in bgp_unlock (bgp=<optimized out>) at ./bgpd/bgpd.h:2513
> #11 peer_free (peer=0x62a000000200) at bgpd/bgpd.c:1313
> #12 0x000056b57bb0aca8 in peer_unlock_with_caller (name=<optimized out>, peer=<optimized out>)
> at bgpd/bgpd.c:1344
> #13 0x000076066a6dbb2c in event_call (thread=thread@entry=0x7ffc8cae1d60) at lib/event.c:2011
> #14 0x000076066a60aa88 in frr_run (master=0x613000000040) at lib/libfrr.c:1214
> #15 0x000056b57b8b2c44 in main (argc=<optimized out>, argv=<optimized out>) at bgpd/bgp_main.c:543
Actually, the BGP_NAME item has not been used at allocation for
static->prd_pretty, and this results in reaching 0 quicker at bgp
deletion.
Fix this by reassigning MTYPE_BGP_NAME to prd_pretty.
Fixes: 16600df2c4 ("bgpd: fix show run of network route-distinguisher")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 64594f8a68)
When a whole distribute-list is deleted (can be done only using API),
all its children must be cleaned up manually.
Fixes#16538
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
(cherry picked from commit 8fad4f317e)
The adj_process_threeway() api may call the adj_state_change()
api, which may delete the adj struct being examined. Change the
signature so that callers pass a ptr-to-ptr so that they will
see that deletion.
Signed-off-by: Mark Stapp <mjs@cisco.com>
(cherry picked from commit 3eb7d16411)
The function zebra_nhg_hash_equal is only used
as a hash function for storage of NHG's and retrieval.
If you have say two nhg's:
31 (25/26)
32 (25/26)
This function would return them as being equal. Which
of course leads to the problem when you attempt to
hash_release 32 but release 31 from the hash. Then later
when you attempt to do hash comparisons 32 has actually
been freed leaving to use after free situations and shit
goes down hill fast.
This hash is only used as part of the hash comparison
function for nexthop group storage. Since this is so
let's always return the 31/32 nhg's are not equal at all.
We possibly have a different problem where we are creating
31 and 32 ( when 31 should have just been used instead of 32 )
but we need to prevent any type of hash release problem at all.
This supercedes any other issue( that should be tracked down
on it's own ). Since you can have use after free situation
that leads to a crash -vs- some possible nexthop group duplication
which is very minor in comparison.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 5a1b61aeba)
When mgmt reads configuration from file, it shouldn't add implicit state
data to the candidate datastore. Configuration datastores like candidate
should never store state, otherwise they fail validation.
Fixes#15814
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
(cherry picked from commit 61e8d5e0b9)
