- Add separate get, get-config, get-state operations to query command, as
well as switching default output to JSON.
- Add an `--xml` to change the output format.
- move printss to logging.debug so output is a machine parseable result.
Signed-off-by: Christian Hopps <chopps@labn.net>
It's just annoying when the linter tells to apply the formatting for the code
you didn't touch.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When testing SNMP service on FRR, the following error message may
appear on some distros.
> # snmpwalk -v2c -c public .1.3.6 1.1.1.1 <OID>
> Bad operator (INTEGER): At line 73 in /usr/share/snmp/mibs/ietf/SNMPv2-PDU
> [..then result ..]
>
The error message is due to the /etc/snmp/snmp.conf file. By default, this
file is used by both snmp server and client side. The net-snmp MIB parsing
routing loads MIBS, to bind oids with the naming scheme used by the MIBS.
> # cat /etc/frr/snmp.conf
> [snmp]
> mibs +ALL
>
A potential fix would consist in modifying the SNMPv2-PDU.mib file: the
problem is known on ubuntu distros, as the snmp-mibs-downloader package
has not updated the SNMPv2-PDU.mib file.
The choice is done to not modify the original distro where the test is run
on. Fix the topotests by ignoring the 'SNMPv2-PDU line 73" error message, and
keep the other error messages that may happen, for instance, when an
unknown oid name value is requested.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The Support bundle generation was/is failing in both
our upstream ci and locally. This cleans up the failures
that I am seeing such that tests now continue to run
instead of aborting the test run.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In topotest, a given interface has only the ignore routes bit turned
on for IPv6 only, whereas topotest is expected to turn it on for all
address families.
> # show interface
> Interface r2-r3-eth2 is up, line protocol is up
> [..]
> flags: <UP,BROADCAST,RUNNING,MULTICAST>
> Ignore all v6 routes with linkdown
> Type: Ethernet
> [..]
This is because the only the 'default' ipv6 ignore sysctl is set to
1. Set also the /proc/sys/net/conf/<family>/default/ignore_routes_with_linkdown
flag, to have same behaviour for ipv4 and ipv6.
Fixes: 4958158787 ("tests: micronet: update infra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add the ability to run a fpm listener to the testing
system. This is nothing more just allowing the test
system to bring it up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace OID string parsing of snmptrap log files based on odd/even line
numbers with regex string search to prevent test failures in cases where
log entries don't match assumed order.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
This needs to be used for persistent state, which currently is misplaced
into `/var/run` / `/run` where it gets deleted across reboots.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Create reate exabgp cli fifo even it is not used in topotests to avoid
this error message:
> 16:21:42 | 2290205 | cli | could not find the named pipes (exabgp.in and exabgp.out) required for the cli
> 16:21:42 | 2290205 | cli | we scanned the following folders (the number is your PID):
> 16:21:42 | 2290205 | cli control | - /run/exabgp/
> 16:21:42 | 2290205 | cli control | - /run/0/
> 16:21:42 | 2290205 | cli control | - /run/
> 16:21:42 | 2290205 | cli control | - /var/run/exabgp/
> 16:21:42 | 2290205 | cli control | - /var/run/0/
> 16:21:42 | 2290205 | cli control | - /var/run/
> 16:21:42 | 2290205 | cli control | - /usr/local/run/exabgp/
> 16:21:42 | 2290205 | cli control | - /usr/local/run/0/
> 16:21:42 | 2290205 | cli control | - /usr/local/run/
> 16:21:42 | 2290205 | cli control | - /usr/local/var/run/exabgp/
> 16:21:42 | 2290205 | cli control | - /usr/local/var/run/0/
> 16:21:42 | 2290205 | cli control | - /usr/local/var/run/
> 16:21:42 | 2290205 | cli control | please make them in one of the folder with the following commands:
> 16:21:42 | 2290205 | cli control | > mkfifo //run/exabgp.{in,out}
> 16:21:42 | 2290205 | cli control | > chmod 600 //run/exabgp.{in,out}
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Log exabgp by default in /tmp/topotests/<testname>/<peername>/exabgp.log
Level is INFO.
Note that in case the configuration syntax is invalid, exabgp does not
log into the file and exits at startup. You can check a configuration
syntax by running:
> exabgp <exabgp.cfg>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Require exabgp >= 4.2.11 to allow to newer version to run exabgp
topotests. Next commits will adapt the exabgp topotests when needed.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
multi path support by snmp implies change in configuration and expected
tests results.
ipv6 trap test output is now ordered to avoid radom result due to
timeline.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a test to check that the presence of a route-map at
exportation with a 'set extcommunity rt' is enough to allow
the prefix to be exported.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Configure the bmp monitor unicast loc-rib.
Check the logging messages for the updated/withdrawn prefixes with
the presence of the loc-rib peer-type.
Signed-off-by: Farid MIHOUB <farid.mihoub@6wind.com>
Add "policy" field to the logged bmp messages so policy checks within
topotests would be easier and clearer.
Signed-off-by: Farid MIHOUB <farid.mihoub@6wind.com>
Allows you to run daemons under valgrind integrated with gdb. When daemons are
run with the ``--gdb-daemons/--gdb-routers`` options they will be wired up to
valgrind using vgdb (valgrind tool) so gdb will stop when valgrind errors are
encountered.
Signed-off-by: Christian Hopps <chopps@labn.net>
When specified `--gdb-use-emacs` will launch the daemon with gdb inside a
running emacs server using `emacsclient --eval` commands.
Signed-off-by: Christian Hopps <chopps@labn.net>
Issue: Sometimes BGP neighbors are not up before doing any PIM
operation, that is causing some tests failures.
https://github.com/FRRouting/frr/issues/14441
Fix: Added BGP convergence for all tests where BGP is used to make
sure all BGP neigbhors
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
This patch includes:
* Implementation of RFC 5709 support in OSPF. Using
openssl library and FRR key-chain,
one can use SHA1, SHA256, SHA384, SHA512 and
keyed-MD5( backward compatibility with RFC 2328) HMAC algs.
* Updating documentation of OSPF
* add topotests for new HMAC algorithms
Signed-off-by: Mahdi Varasteh <varasteh@amnesh.ir>
The output of gen_json_diff_report is used all over the place and
it outputs d1 and d2. Let's change this to output and expected
as that is how it is used. Should help with debugging.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let us start using output and expected in lib/topotest.py
because when we see output it is confusing what d1 is
versus what d2 is.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When JoinState is not passed to API it is expected to
be in Joined state, there was a minor bug in API, where
it was printng JoinState as None, which is default value
in API. Updated value to print Joined when verification
fails.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
