Tests were timing out in our test system due to lost packets and
flakiness of the lower end systems. Just set the timers to 3/10
and give them plenty of time to converge.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Adding api to verify ip nht command.
2. 5 cases of static routes with admin dist and tag
3. Run time = 89Secs
Signed-off-by: nguggarigoud <nguggarigoud@vmware.com>
Prepare the infrastructure to allow configuring and launching an SNMP
daemon as part of testing scenario.
Signed-off-by: Babis Chalios <babis@voltanet.io>
Signed-off-by: Pat Ruddy Chalios <pat@voltanet.io>
The bgp_gr_functionality_topo1 test was shutting down an
interface on r2 and then trying to bring it up on r1.
Hijinx ensued.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Enhanced lib/topojson.py for creating topologies with switches and routers
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
1. Enhanced lib/common_config.py for common configuration/verification needed
for PIM automation
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
1. Added lib/pim.py for PIM configuration/verification
2. Ran it through (black) for expected formatting
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
Timestamps in test logs are needed for correlation with messages in
routing protocol log files. Vox populi indicates preference for
timestamp at beginning of line.
OLD:
(#55) scripts/rip-show.py:61 COMMAND:r1:vtysh -c "show ip rip status": 00:0.* 00:0:wait:RIP Peers:
NEW:
Sat Dec 19 08:26:45 2020 (#55) scripts/rip-show.py:61 COMMAND:r1:vtysh -c "show ip rip status": 00:0.* 00:0:wait:RIP Peers:
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
While accidently running the topotests with version 3
I keep getting:
TypeError: `dict_values` object does not support indexing..
version 2 of python dict.values() returns a list.
version 3 does not
Write some code to allow both to be handled.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This new daemon manages Segment-Routing Traffic-Engineering
(SR-TE) Policies and installs them into zebra. It provides
the usual yang support and vtysh commands to define or change
SR-TE Policies.
In a nutshell SR-TE Policies provide the possibility to steer
traffic through a (possibly dynamic) list of Segment Routing
segments to the endpoint of the policy. This list of segments
is part of a Candidate Path which again belongs to the SR-TE
Policy. SR-TE Policies are uniquely identified by their color
and endpoint. The color can be used to e.g. match BGP
communities on incoming traffic.
There can be multiple Candidate Paths for a single
policy, the active Candidate Path is chosen according to
certain conditions of which the most important is its
preference. Candidate Paths can be explicit (fixed list of
segments) or dynamic (list of segment comes from e.g. PCEP, see
below).
Configuration example:
segment-routing
traffic-eng
segment-list SL
index 10 mpls label 1111
index 20 mpls label 2222
!
policy color 4 endpoint 10.10.10.4
name POL4
binding-sid 104
candidate-path preference 100 name exp explicit segment-list SL
candidate-path preference 200 name dyn dynamic
!
!
!
There is an important connection between dynamic Candidate
Paths and the overall topic of Path Computation. Later on for
pathd a dynamic module will be introduced that is capable
of communicating via the PCEP protocol with a PCE (Path
Computation Element) which again is capable of calculating
paths according to its local TED (Traffic Engineering Database).
This dynamic module will be able to inject the mentioned
dynamic Candidate Paths into pathd based on calculated paths
from a PCE.
https://tools.ietf.org/html/draft-ietf-spring-segment-routing-policy-06
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Emanuele Di Pascale <emanuele@voltanet.io>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. Enhanced framework to
a. Verify fib active routes(lib/common_config.py).
b. Verify bgp multi path routes(lib/bgp.py).
c. Create mininet nodes with different names(lib/topojson.py).
4. 12 Test cases of static routing with ibgp.
Test suite execution time is ~30 minutes.
5. 12 Test cases of static routing with ebgp.
Test suite execution time is ~30 minutes.
Signed-off-by: naveen <nguggarigoud@vmware.com>
1. As per recent changes done in PR #7652, we have modified the auto-rd verification logic
2. Dev PR link: https://github.com/FRRouting/frr/pull/7652
Signed-off-by: kuldeepkash <kashyapk@vmware.com>
I accidently installed something that is telling me about
unlosed handles in the tests. Let's clean them up.
<and yes I have no idea wtf I did>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
the topolog importation folder must be precised. otherwise following
error message appears:
root@dut-vm:~/topotests/bgp_flowspec# python3 test_bgp_flowspec_topo.py
Traceback (most recent call last):
File "test_bgp_flowspec_topo.py", line 96, in <module>
from lib.lutil import lUtil
File "/root/topotests/bgp_flowspec/../lib/lutil.py", line 25, in <module>
from topolog import logger
ImportError: No module named 'topolog'
root@dut-vm:~/topotests/bgp_flowspec#
The same error occurs with lutil and bgprib which are 2 libraries
located under lib/ folder. Some precisions are added too.
PR=71290
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
python3 does not support execfile implementation.
replace it with open and exec api that are available in both python 2
and 3 implementations.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Fix lib to start loggin to correct daemon file on startup
Fix bgp-auth tests for the logging changes
Fixes Issue # 7545
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
1) in generate_ips if start_ipaddr does not have a `/` in it
there exists a code path where both mask and step are
null values. Write a bit of code to ensure this pre-req
is found early and often
2) in verify_rib there exists a code path where static_route
is null when we get to the non static route section. Change
the code to operate on the advertise_network_dict that
we are iterating over.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add support to compare the number of RIB nexthops, rather than the
specific nexthop addresses. Use this in the bgp_ecmp topotests that
test maximum-paths - testing the specific nexthops is wrong there,
it's not deterministic and we get spurious failures.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Ensure the list of daemons to start is either the one specified
by a caller or the default one from the router configuration.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added 2 tests to verify bgp route aggregation using summary-only and
as-set commands
2. Execution time is ~90 sec
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Removed initial_wait in ospf library.
2. Removed one test case which was random
failure, will add back after traiging.
Signed-off-by: naveen <nguggarigoud@vmware.com>
1. Adding 18 ospf testcases to topojson.
2. Adding ospf.py library.
Test suite execution time is ~18 minutes.
Signed-off-by: naveen <nguggarigoud@vmware.com>
We have a bunch of tests that wait *then* check a command for success/failure.
Modify the tests to check *first* then to wait. This reduces test
run times on my system by ~1400 seconds for a full run.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Added test to verify bgp vrf dynamic route leak functionality
2. Total execution time is ~8 mins
3. Added kernel version check, these script would be run for kernel version >= 4.19
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Topotest for isis-vrf is added for ipv4 and ipv6.
2. Test case for checking isis topology.
3. Test case for checking zebra isis routes.
4. Test case for checking linux vrf routes.
5. 2 new API's written in topotest/lib for checking vrf routes.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Avoid unnecessary use of StringIO in one place, use version-
dependent method in another. Remove a couple of other py2->py3
problems.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change the public router stop method to always do a two-phase
shutdown - once without waiting and a second time with a wait.
Ordinary callers need to use this approach when stopping routers.
Move the detailed internal details to a private method that tests
should not call directly.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The vxlan `ip... ` command is failing because we are passing in
`no learning` and that is failing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the topotest mem-leak reporting is enabled, use the same
two-step daemon stop procedure that's used in
the topogen.stop_topology path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
add thread info, use "bt full" to get variables and add a bit of
disassembly for good measure.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Increasing BGP convergence wait time to overcome Ubuntu 16.04 arm8 box, as
bgp neighorship is taking more time in this particular testbed.
2. Debugged bgp-ecmp-topo2 failures and here also it seems to be bgp convergence
issue, doing some enhancement in scripts to handle it
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Stop printing hard-coded 30 seconds in a couple of places in
bgp.py in the topojson infra - print the actual time
spent waiting.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. It will generate support bundle/sump data on test failures
2. It used /usr/lib/frr/generate_support_bundle.py utility to dump the data
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Another short timeout for bgp - make the
verify_bgp_convergence_from_running_config() api use the same
generous timeout as verify_bgp_convergence()
Signed-off-by: Mark Stapp <mjs@voltanet.io>
1. Added 7 test cases to verify bgp recursive nexthop and ebgp multi-hop functionality
2. Added framework support to automate these test cases
3. Total execution time is ~5 mins
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Use the right list of daemons to avoid trying to start zebra twice.
Change a zebra log message to INFO level to avoid stderr check
failure.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a few retries during router shutdown before killing a daemon. Also
work harder to start only a single instance of daemons, esp. zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Instead of waiting for daemons start with `sleep`, start them with the
`-d` parameter so they can release the terminal themselves when ready.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Start logging early everything (including debug) to
`/tmp/topotest/<test>/<node>/<daemon>.{out,err}`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Handle the duplicated code with a simple conditional: if called from
specialized API use provided daemons configuration, otherwise fallback
to old `Router` own daemon settings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Include vrf name with interface name when topojson framework
generates interface configuration. This matches the output of
'show runn', and makes config reset less disruptive. Also
stop removing configured debugs and log output when re-generating
config.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Error Message seen:
2020-06-11 14:00:35,288 ERROR: assert failed at "test_ebgp_ecmp_topo2/test_ecmp_after_clear_bgp[redist_static]": Testcase test_ecmp_after_clear_bgp[redist_static] : Failed
Error: TIMEOUT!! BGP is not converged in 30 seconds for router r3
assert 'TIMEOUT!! BGP is not converged in 30 seconds for router r3' is True
if a retry for a failed connection is 120 seconds we should wait slightly
longer than a retry session, which this clear test was not doing.
Especially since we know our topotests are lossy on data under load.
Apparently I changed this earlier to 90 seconds, but a retry window
is 120. Not sure wtf I was thinking
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The convergence timeout in lib/bgp.py was something like 40 secs;
that's not really long enough for the CI. Raise the timeout to
40 x 3 secs.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Just a simple setup for pbr to prove it starts. Once the json
code for pbr gets in we can add more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The involved piece of code is supposed to find a 'closest' match for two
JSON structures using another JSON diff. However, it can happen that
during that new diff the JSON structures are altered (elements from a
list are deleted when 'found'). This is in general ok when the deleted
element is part of the JSON structure which 'matches', but when it later
turns out that some other element of the structure doesn't fit, then the
whole structure should be recovered. This is now realized by using a
deepcopy for the besaid new JSON diff such that the original is only
altered (e.g. deleted) when the diff is clean.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
1. Test suite has 25 test cases to verify BGP-graceful-restart functionality
2. Execution time is ~21 Mins
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Adding APIs to common_config.py to support BGP-Graceful-Restart automation
2. Adding APIs to create BGP-GR config to bgp.py
3. Adding verification API for BGP-GR functionality
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Diff'ing JSON objects is a crucial operation in the topotests for
comparing e.g. vtysh output (formatted as JSON) with a file which
covers the expectation of the tests. The current diff functionality
is 'self-written' and intended to test a JSON object d2 on being a
subset of another JSON object d1. For mismatches a diff is generated
based on a normalized textual representation of the JSON objects.
This approach has several disadvantages:
* the human provided JSON text might not be normalized, hence
a diff with line numbers might be worthless since it provides
close to zero orientation what the problem is
* the diff contains changes like commatas which are meaningless
* the diff might contain a lot of changes about meaningless
content which is present in d1 but not in d2
* there is no proper functionality to test for 'equality' of
d1 and d2
* it is not possible to test for order, e.g. JSON arrays are
just tested with respect to being a subset of another array
* it is not possible to check if a key exists without also
checking the value of that particular key
This commit attempts to solve these issues. An error report is
generated which includes the "JSON Path" to the problematic JSON
elements and also hints on what the actual problem is (e.g. missing
key, mismatch in dict values etc.).
A special parameter 'exact' was introduced such that equality can be
tested. Also there was a convention that absence of keys can be
tested using the key in question with value 'None'. This convention
is still honored such that full backwards compatiiblity is in
place.
Further order can be tested using the new tag '__ordered__' in
lists (as first element). Example:
d1 = [1, 2, 3]
d2 = ['__ordered__', 1, 3, 2]
Tesing d1 and d2 this way will now result in an error.
Key existence can now be tested using an asterisk '*'. Example:
d1 = [1, 2, 3]
d2 = [1, '*', 3]
d1 = {'a': 1, 'b': 2}
d2 = {'a': '*'}
Both cases will result now in a clean diff for d1 and d2.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Modify the import-check command to require the underlying prefix
to exist in the rib. General consensus is that this is the correct
behavior.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Added 2 new test cases to bgp-basic-functionality-topo1
2. Enhanced 2 tests to run for both static routes and network advvertise command
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 1 test case to verify NO-ADVERTISE Community functionality
2. Enhanced bgp.py to exclude routers from verification, if doesn't have bgp config
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Added 5 test cases to verify BGP AS-allow-in behavior in FRR
2. Enhanced framework to support BGP AS-allow-in config(lib/bgp.py)
3. Added API in bgp.py to verify BGP RIB table(lib/bgp.py)
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Used aggresive values to verify keepalive and holddown timers functionality
2. Modified variable name in lib/bgp.py
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
1. Modified scripts to optimize execution time for route-map test suite
2. Removed unnecessary print statements from /lib/bgp.py
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
This is necessary to make some tests work correctly. Only topologies
created using the topogen framework benefit from this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Add cli error returned for invalid bgp-community-list command
Fix retry function to avoid retries when expected is False
The lib/bgp.py test code is bringing up neighbors and clearing them
to test that things are working appropriately. The problem we have
is that we are only waiting 30 seconds for declaration of failure.
In a high load system packets can be lost and as such the initial
convergence may not happen. Modify the test to wait for 1 retry
window test period before declaring failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
1. Add check if show running output is corrupted as frr-reload does
not return cause of failure, just the error codes.
2. Change logger level to debug for some extra information.
3. Modify logger messages for more clear information.
4. Print configuration commands to console instead of show running
5. Print show command output to console.
6. Move show running output within flag show_router_config.
7. Add retry decorator for retyring show commands.
The peerUptime data received from a `show bgp ipv4 uni summ json`
gives you the time in seconds since the peer has come up.
The clear_bgp_and_verify function is checking the peerUptime
for before and after and if they are the same then the test
was declaring a clear failure.
The problem with this is of course that the tests can run fast
enough that the peerUptime is the same for before and after the clear.
Modify the test case to use peerUptimeEstablishedEpoch.
This value is the seconds since the epoch since the establishment
of the peer. This will allow us to know that a clear happened.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The new `run_and_expect` variant - called `run_and_expect_type` - tests
the return value type of the test function and optionally the return
value.
Now we can implement tests from test functions that return different
return types.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Attempt to run the function multiple times to make sure we got the
result we expected. This is a middle ground between big sleeps and short
test intervals.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Allow users of `luCommand` to specify wait time between commands
execution and simplify the `wait` method implementation.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Fix two main issues:
* Don't use float to figure out if we spent the time user asked;
* Don't depend on system clock to find we reached the end of time;
The fix is basically pre caculating the amount of wait cycles we are
going to peform and use a counter.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
All debug logging has been thrown to the floor in this loop.
Add it back in and additionally add a bit more debugging to
know what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A bunch of our current tests setup data and redistribute
it across some bgp connections and then test for it
being there. A delay of 2 seconds that was initially
there to ensure that the data has propagated does not
actually work all the time when you have a loaded
virtualized environment.
Make the sleep 10 seconds. I agree this is not the ideal
solution but I would rather get the damn tests up and running
again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
frr-reolad.py invocation sends info message to stderror channel
Redirected stderror from frr-reload.py to stdout
Fixed verify_convergence when more than one link is present
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Creates logdir everytime in start_topology, removed stop_topoloy.
Using tgen.stop_topology in test case now.
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adds mulitple test scenarios for prefix-lists in bgp. Verfication
API for prefix-lits
Also adds description for bgp-basic test suite
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adding verify and config apis for bgp timer testcase
Adding verify and config apis for changing ASN to 4 bytes
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adding mulitple methods to form BGP configuration and other
helper methods.
If "bgp" is given in JSON the configuration will be created
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Adds method to load configuration on the router. Save configuration
for resetting.
Adds method for configuring interfaces ip address on router.
Adds logdir and other pytest.ini option
Adding in the command `show log-filter` made `show log`
ambiguous. Change the checkRouterRunning() test to do
full `show logging` so it works again.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a common function to retrieve and canonicalize
'show ipv6 route' output for use in topotests. Use that in
the test_ospf6_topo1 test; update the corresponding 'expected'
results files to match the lib function.
Replace some 'print' with 'logger' statements in that test also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change the router log output to the previous folder so it doesn't get
erased when starting the old API (unbreaks command/output logging on
Topogen).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
`param.get` always evaluates the second argument and it was causing
two log directories being created for topologies using Topogen.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Start the addition of FreeBSDRouter class that inherits from
class Router. At this point we do not do a whole lot. We
just come up on FreeBSD, lots of stuff that still needs to
be fixed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
As part of the class rework, move the linux specific config
into the LinuxRouter.config section instead of being in the
Router class.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the LinuxRouter code such that it inherits from the
Router class. This is setup work for (a) pulling out linux
specific config from class Router and (b) creating a FreebsdRouter
that inherits from class 'Router'.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The sharp daemon did not have any ability to be used in
topotests. Add some code to allow this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start abstraction of the module_present into module_present_linux and freebsd
To allow for multiple platforms that the topotests can be run on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the cleanup of diagnose_env to allow the running of topotests
on platforms besides linux.
So we split up diagnose_env into linux and freebsd variants.
At this point in time freebsd doesn't have any special code.
To be determined in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Before this update, json_cmp_results which were formatted as strings
would not show the error mesage but just an object reference.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a breadcrumb for people testing to hopefully allow
them to figure out what is going wrong when they
are testing different versions of FRR using
topotests and staticd is not running because
this version of staticd needs to be cleaned up
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Label proxy manager test covering both LDP and BGP label requests.
lib/topotest.py:restartRouter() function has been fixed in order to
allow propagating options to deamons other than zebra.
Signed-off-by: F. Aragon <paco@voltanet.io>
The code was not attempting to set the max platform_labels
on a per router basis, leaving us w/ situations where
mpls install would fail because platform_labels was 0.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case where vrf backend is based on NETNS, the link enable command
switches from context so as to perform the command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In a effort to migrate more tests to use `run_and_expect` instead of
`sleep`s, this commit imports some common functions used to compare
router output. Retrying output comparison for N times, instead of
relying on arbitrary code `sleep`s, should help CI system tests fail
less and possibly run for less time.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When normalizing a text also remove trailing whitespace since external
tools might add them. This commit fixes a test failure in ospf_topo1 on
Ubuntu 18.04.1.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Standardize run_and_expect to show start and end time along with maximum
estimated wait time.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Don't quit on the first match. While here add some more `json_cmp` tests
to make sure this doesn't happen again.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Allow json_cmp to compare JSON values which begin with a list instead of
a dictionary.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Prior behavior of luCommand was to convert newlines to spaces in DUT
output before pattern matching. New method operating in parallel uses
re.DOTALL to mimic same behavior and allow preserving original DUT output.
The original output is needed for some scripts that parse line-by-line.
There is also some test code to compare match results using the
old way and new way and log a message if they are different. After
some short time we can develop confidence that using this new method
will not break any existing tests.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
topotest library is being added a new parameter when preparing the
configurationof each daemon. This parameter will be used to call the
daemon with some extra parameters. The -n parameter for zebra is taken
into account.
Also, when a extra parameter is given for calling zebra, a check is done to
see if it is possible to run zebra daemon with that option. This is the
case for vrfwnetns option. If not available, an error message is sent
back.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Use the pytest assert function to be able to report to pytest failures
that happened inside the API.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Remove PID files after a SIGKILL or confirmation that the pid file no
longer contains a running PID.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The messages level of this commit were downgraded because some of them
happen on 'non-error' situations. This should help diminish the error
log verbosity on the CI-system run.
It was found a regression on an edge case when the second number in the
comparison was (at least) 2 numbers longer the comparison would fail
with a wrong return value. It succeeded for some cases because the
first comparison in the exception was correct, but not the second.
Standardized function that removes format spaces (or tab) and carriage
returns characters. This function is useful to allow output text
processing without breaking diff capabilities.
Output example:
*N IA 2001:db8:2::/64 :: r2-eth0 00:03:39
Becomes:
*N IA 2001:db8:2::/64 :: r2-eth0 00:03:39
If you remove 'IA' you won't have space formatting problem anymore.
Having a generic start/stop methods for TopoGear allows TopoGen to call
start/stop for all equipments. This allows us to reduce the teardown
code by removing the necessity of having to always remember to call
each equipment clean up function.
Auto configure daemon logging files to the appropriated place. This
removes the responsibility from the test developer to set this in the
daemon configuration.
TopoRouters now create a logger (which logs to /tmp/{router_name}.log)
on start to record all commands and events that it goes through. All log
messages contain timestamps that may be used in the future to:
(1) correlate commands call with events
(2) benchmark/time command speed
Allow topotest subsystems to create their own loggers. This will help
increase log organization and allow different settings to fit the
subsystems needs.
The default logger (root) is already being used by Mininet, so to allow
customizing logging output and configuring log files Topolog was
created. Topolog is no more than a thin layer abstraction to call
logging functions without using the 'root' logger.
Use a configuration file for casual settings like:
* Verbosity level (helps when debugging mininet issues)
* Custom daemon directory (in order to support running different daemon
binaries without touching tests)
* Daemon type switch: allow running quagga without touching any test
files
Also fix the add_router() documentation to include all options.
Create a specialized assert and json_cmp() result to improve the
comparison output. With this we also got a way to display all comparison
failures instead of just the first one.
Allow vtysh_cmd() to convert JSON output to Python data structures.
This feature will be used to get vtysh JSON outputs for tests
comparsions.
Usage example:
```py
router = get_topogen().gears['r1']
json_output = router.vtysh_cmd('show ip ospf json', isjson=True)
json_cmp(json_output, {'important_key': 'important_value'})
```
Implemented a JSON compare function that tells you when a specific
subset of items exist or not inside a JSON dataset.
More details can be found in the function docstring or in the test file
lib/test_json.py.
After some feedback from mwinter@, the names of equipments are now
shorter to make it easier to type them and to keep consistency with
mininet documentation. While here, update the template and make it use
optional name parameters for clarity.
This commit changes how topology links are made in order to support
discovering who and what link is the node interface connected to. After
that, the implementation of the link state change functions were trivial
as calling a command in the node shell.
The method run() was moved from TopoRouter to TopoGear so all equipment
types can benefit from this code.
Topogen (Topology Generator) is a helper that wraps around Topotest to
simplify some of the boilerplate code. This abstraction will help the
development of new tests and new APIs without breaking the existing
ones. It also makes the relation of objects clearer, since we no longer
touch the Mininet API directly, which in turn also makes us less
vulnerable to external API changes.
Implemented two functions to help setting sysctl values:
* set_sysctl: set a sysctl and return an auditable return value
* assert_sysctl: uses the previous function to assert that the sysctl
was set
Fixes the issue for topotest to fail ot end of skipped LDP test on
a system without MPLS support
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
When we have a kernel sub version > 10 the float conversion
of the kernel version causes 4.10 to be less than 4.5
Get the kernel version in groups on <major>.<minor> and do
comparison that way
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
