This should simplify all code that needs to iterate over all
adjacencies of a given area (iterating over all adjacencies of all
circuits is cumbersome).
While here, repurpose isis_adj_exists() into a lookup function,
making it more generally useful.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The global isis structure can't be created/destroyed using the CLI,
so there's no need to define a QOBJ for it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make that function accept an IS-IS area pointer instead of an
area name, making it more in line with the rest of the code base
(*delete() functions shouldn't perform lookups internally).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some commands were using IS-IS while others were using ISIS. Fix
this inconsistency (prefer the former option for obvious reasons).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This fixes a problem where "show isis summary" could display
inconsistent information about the IPv6 dst-src SPT when
"ipv6-dstsrc" wasn't explicitly configured.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A recent refactoring changed how isisd parses SR information from
the LSPDB and introduced a regression that prevents Prefix-SIDs to
work over unnumbered interfaces. Fix this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
With these changes the IS-IS SR topotest should run to completion
about twice as fast compared to before (4 -> 2 minutes on my
machine).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Give the FRR users some examples of gRPC usage in scripts to let them
start experimenting with the new configuration interface provided by
YANG/northbound.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Suppose you have more than 2 addresses on a pim interface:
lo up default 10.255.0.1/32
10.255.0.101/32
10.255.0.254/32
A `show ip pim int lo` gives us this:
eva# show ip pim interface lo
Interface : lo
State : up
Address : 10.255.0.1 (primary)
10.255.0.101/32
When we go look at the code that pulls secondary addresses in
we are using a prefix_cmp to know if we know about a secondary already
but were expecting true values instead of -1/0/1 being returned.
Modify code so that pim sees all secondary addresses
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Removed old timer thread resets, since this has been taken care of
after execution of the threads by the thread_fetch function in
lib/thread.c for quite some time now.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
For allocating a new label range the label manager will loop
the existing label chunks and compare the start and end labels
with the label range in question. In case a label range should
be re-allocated to the existing label chunk, the end label
of the chunk is not honored correctly, e.g. the new label
range has to be a true subset of the existing label chunk.
This is very easy reproducable by re-allocating a single label.
e.g. a label range of size 1.
This problem is fixed by allowing the mentioned 'end' labels to
be equal.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Currently, bgpPeerTable only looks the default BGP instance. Most
vendors return all the available peers in this table. This commit
exposes all BGP instances.
The other tables are unchanged as it doesn't make sense to expose
routes from random VRFs into a single table. Vendors are using SNMP
contexts for that but we don't have support for it. Therefore, do
nothing.
Fix#6077
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
When the topotest mem-leak reporting is enabled, use the same
two-step daemon stop procedure that's used in
the topogen.stop_topology path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Initial version of OSPF configuration Yang.
Raised new PR with review comment fixes on top of PR
https://github.com/FRRouting/frr/pull/6055
Revision History:
1. Fixed review comments.
2. Removed ospf list with id as key, name can be used as key
3. Corrected the alignment
Co-authored-by : Santosh P K <sapk@vmware.com>
Co-authored-by : Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
When LDP is configured in Order Control mode and we receive a
label withdraw message, we should only resend label withdraws to
peers that are the NH for that fec being withdrawn.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
The base topology is a two level CLOS with two racks. There are
two PEs/TORs in each rack that provide active-active redundancy to
two dual-attached servers in the rack. And EVPN-PIM is used for
flooded traffic.
Reference: evpn-mh-topo-tests.pdf
Tests have been added for the following functionality -
1. ES management
2. EAD/Type-1 route handling
3. Type-2 route with non-zero ESI
4. MAC sync and remote MAC (with remote-ES destination) handling
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
It is causing build failures because of conflicts with netinet.
Instead I have re-defined the MAC-SYNC UAPIs in the re_netlink.c
This is clearly a hack that needs to be re-visited.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
MAC-IP routes are used for syncing local entries across redundant
switches in an EVPN-MH setup. A path from a peer that has a local
ES as destination is tagged as a SYNC path. The SYNC path results in the
addition of local MAC and/or local neigh entry in zebra and in the
dataplane.
Implementation overview
=======================
1. Three new flags "local-inactive", "peer-active" and "peer-proxy"
are maintained per-local-MAC and per-local-Neigh entry.
2. The "peer-XXX" flags are set and cleared via SYNC path updates
from BGP. Proxy sync paths result in the setting of "peer-proxy" flag
(and non-proxies result in the "peer-active").
3. A neigh entry that has a "peer-XXX" flag set is programmed as
"static" in the dataplane.
4. A MAC entry that has a "peer-XXX" flag set or is referenced by
a sync-neigh entry (that has a "peer-XXX" flags set) is programmed
as "static" in the dataplane.
5. The sync-seq number is used to normalize the MM seq number across
all the redundant switches i.e. the max MM seq number across all
switches is used by each of the switches. This commit also includes
the changes needed for extended MM seq syncing.
6. A MAC/neigh entry has to be local-active or peer-active to sent to
BGP. An entry that is NOT local-active is sent with the proxy flag (so
BGP can "proxy" advertise it).
7. The "peer-active" flag is aged out by zebra by using a hold_timer
(this is instead of being abruptly dropped on SYNC path delete). This
age-out is needed to handle peer-switch restart (procedures are specified
in draft-rbickhart-evpn-ip-mac-proxy-adv). The holdtime needs to be
sufficiently long to allow an external neighmgr daemon or the dataplane
component to independently probe and establish local reachability of a
host. The MAC and neigh hold time values are configurable.
PS: In the future this probing may happen in FRR itself.
CLI changes to display sync info
================================
MAC
===
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@torm-11:mgmt:~# net show evpn mac vni 1000
Number of MACs (local and remote) known for this VNI: 6
Flags: N=sync-neighs, I=local-inactive, P=peer-active, X=peer-proxy
MAC Type Flags Intf/Remote ES/VTEP VLAN Seq #'s
00:02:00:00:00:25 local vlan1000 1000 0/0
02:02:00:00:00:02 local PI hostbond1 1000 0/0
02:02:00:00:00:06 remote 03:00:00:00:00:02:11:00:00:01 0/0
02:02:00:00:00:01 local X hostbond1 1000 0/0
00:00:00:00:00:11 local PI hostbond1 1000 0/0
02:02:00:00:00:05 remote 03:00:00:00:00:02:11:00:00:01 0/0
root@torm-11:mgmt:~#
root@torm-11:mgmt:~# net show evpn mac vni 1000 mac 00:00:00:00:00:11
MAC: 00:00:00:00:00:11
ESI: 03:00:00:00:00:01:11:00:00:01
Intf: hostbond1(58) VLAN: 1000
Sync-info: neigh#: 0 local-inactive peer-active >>>>>>>>>>>>
Local Seq: 0 Remote Seq: 0
Neighbors:
No Neighbors
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
neigh
=====
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@torm-11:mgmt:~# net show evpn arp vni 1003
Number of ARPs (local and remote) known for this VNI: 4
Flags: I=local-inactive, P=peer-active, X=peer-proxy
Neighbor Type Flags State MAC Remote ES/VTEP Seq #'s
2001:fee1:0:3::6 local active 00:02:00:00:00:25 0/0
45.0.3.66 local P active 00:02:00:00:00:66 0/0
45.0.3.6 local active 00:02:00:00:00:25 0/0
fe80::202:ff:fe00:25 local active 00:02:00:00:00:25 0/0
root@torm-11:mgmt:~#
root@torm-11:mgmt:~# net show evpn arp vni 1003 ip 45.0.3.66
IP: 45.0.3.66
Type: local
State: active
MAC: 00:02:00:00:00:66
Sync-info: peer-active >>>>>>>>>>>>>>>>
Local Seq: 0 Remote Seq: 0
root@torm-11:mgmt:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
