When reading the config file add an ability to know
if we have properly read in anything. So that a daemon
can make fallback plans.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes output would be mangled when filtering with include as a
result of the following bugs:
* Filters were applied per each call to vty_out() instead of buffering
until a line break and then applying
* Long output would sometimes be cut due to using the wrong buffer
pointer
Also remove the trailing \n as it should no longer be necessary to
ensure the vty prompt ends up on a new line.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add function to move all data to the start of a vector by shifting
over contiguous empty slots
* Use this function to remove empty slots leftover after
frrstr_filter_vec
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a CLI preprocessor function that activates when `|` is
found in the command. This is the start of adding support for some text
processing utilities intended for inline use. The first one implemented
here is `| include`, which provides grep-like filtering of command
output.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is an implementation of PBR for FRR.
This implemenation uses a combination of rules and
tables to determine how packets will flow.
PBR introduces a new concept of 'nexthop-groups' to
specify a group of nexthops that will be used for
ecmp. Nexthop-groups are specified on the cli via:
nexthop-group DONNA
nexthop 192.168.208.1
nexthop 192.168.209.1
nexthop 192.168.210.1
!
PBR sees the nexthop-group and installs these as a default
route with these nexthops starting at table 10000
robot# show pbr nexthop-groups
Nexthop-Group: DONNA Table: 10001 Valid: 1 Installed: 1
Valid: 1 nexthop 192.168.209.1
Valid: 1 nexthop 192.168.210.1
Valid: 1 nexthop 192.168.208.1
I have also introduced the ability to specify a table
in a 'show ip route table XXX' to see the specified tables.
robot# show ip route table 10001
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, P - PIM, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR,
> - selected route, * - FIB route
F>* 0.0.0.0/0 [0/0] via 192.168.208.1, enp0s8, 00:14:25
* via 192.168.209.1, enp0s9, 00:14:25
* via 192.168.210.1, enp0s10, 00:14:25
PBR tracks PBR-MAPS via the pbr-map command:
!
pbr-map EVA seq 10
match src-ip 4.3.4.0/24
set nexthop-group DONNA
!
pbr-map EVA seq 20
match dst-ip 4.3.5.0/24
set nexthop-group DONNA
!
pbr-maps can have 'match src-ip <prefix>' and 'match dst-ip <prefix>'
to affect decisions about incoming packets. Additionally if you
only have one nexthop to use for a pbr-map you do not need
to setup a nexthop-group and can specify 'set nexthop XXXX'.
To apply the pbr-map to an incoming interface you do this:
interface enp0s10
pbr-policy EVA
!
When a pbr-map is applied to interfaces it can be installed
into the kernel as a rule:
[sharpd@robot frr1]$ ip rule show
0: from all lookup local
309: from 4.3.4.0/24 iif enp0s10 lookup 10001
319: from all to 4.3.5.0/24 iif enp0s10 lookup 10001
1000: from all lookup [l3mdev-table]
32766: from all lookup main
32767: from all lookup default
[sharpd@robot frr1]$ ip route show table 10001
default proto pbr metric 20
nexthop via 192.168.208.1 dev enp0s8 weight 1
nexthop via 192.168.209.1 dev enp0s9 weight 1
nexthop via 192.168.210.1 dev enp0s10 weight 1
The linux kernel now will use the rules and tables to properly
apply these policies.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using a non-integrated config and starting up
of a protocol daemon, we were not properly handling
all possible cases and as such when an user hit
an actual error they were getting (null) listed
for the message string.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vty_frame() can be used to reduce the amount of output produced by "show
running-config" and "write ...". It buffers output in struct vty->frame
(1024 bytes) and outputs it when vty_out is called. If vty_out isn't
called, it can be removed with vty_endframe() later.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Since we were only setting vty->wfd in config_write, vty->fd would
remain 0 and vty_close() wouldn't close vty->wfd.
Clean up the entire fd closing and make it more explicit. We were even
trying to write to stdin...
Reported-by: Jorge Boncompte <jbonor@gmail.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Now that the logging hole is plugged, we can just print config-loading
errors to the log. This has 2 hidden advantages:
- vty_read_config calls in SIGHUP don't print errors to /dev/null
- errors are consistently printed to syslog on --enable-cumulus
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Instead of having an ?: expression embedded in every single caller of
vty_out, just expand \n to \r\n in the vty code if neccessary.
(Deprecation warnings will be enabled in the next commits which will do
the search-and-replace over the codebase.)
[This reverts commit 4d5f445 "lib: add vty_outln()"]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pretty-prints variable autocompletions by breaking them up into multiple
lines, indenting them consistently and respecting the column width of
the terminal.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Consuming va_args modifies its internal bits, hence the need to copy
it... but the copying wasn't quite right just yet.
Fixes: 4d5f445 ("lib: add vty_outln()")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
