Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The flags can be important - like "threaded" - so we need to
actually capture them when plugins are registered.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add some doc to let developers know about the `-s` flag
with `git commit`.
We were seeing some people writing the sign-off manually.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Adding fields "detect-multiplier" and "remote-detect-multiplier"
for JSON to to reflect changes in "show bfd peers output"
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
Adding new CLI clear bfd counters,
This CLI wil only reset Rx/Tx counters,
it will not reset session UP/DOWN and Zebra event count
Signed-off-by: Sayed Mohd Saquib <sayed.saquib@broadcom.com>
The function bgp_table_range_lookup attempts to walk down
the table node data structures to find a list of matching
nodes. We need to guard against the current node from
not matching and not having anything in the child nodes.
Add a bit of code to guard against this.
Traceback that lead me down this path:
Nov 24 12:22:38 frr bgpd[20257]: Received signal 11 at 1574616158 (si_addr 0x2, PC 0x46cdc3); aborting...
Nov 24 12:22:38 frr bgpd[20257]: Backtrace for 11 stack frames:
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libfrr.so.0(zlog_backtrace_sigsafe+0x67) [0x7fd1ad445957]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libfrr.so.0(zlog_signal+0x113) [0x7fd1ad445db3]1ad445957]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libfrr.so.0(+0x70e65) [0x7fd1ad465e65]ad445db3]1ad445957]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libpthread.so.0(+0xf5f0) [0x7fd1abd605f0]45db3]1ad445957]
Nov 24 12:22:38 frr bgpd[20257]: /usr/lib/frr/bgpd(bgp_table_range_lookup+0x63) [0x46cdc3]445957]
Nov 24 12:22:38 frr bgpd[20257]: /usr/lib64/frr/modules/bgpd_rpki.so(+0x4f0d) [0x7fd1a934ff0d]57]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libfrr.so.0(thread_call+0x60) [0x7fd1ad4736e0]934ff0d]57]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libfrr.so.0(frr_run+0x128) [0x7fd1ad443ab8]e0]934ff0d]57]
Nov 24 12:22:38 frr bgpd[20257]: /usr/lib/frr/bgpd(main+0x2e3) [0x41c043]1ad443ab8]e0]934ff0d]57]
Nov 24 12:22:38 frr bgpd[20257]: /lib64/libc.so.6(__libc_start_main+0xf5) [0x7fd1ab9a5505]f0d]57]
Nov 24 12:22:38 frr bgpd[20257]: /usr/lib/frr/bgpd() [0x41d9bb]main+0xf5) [0x7fd1ab9a5505]f0d]57]
Nov 24 12:22:38 frr bgpd[20257]: in thread bgpd_sync_callback scheduled from bgpd/bgp_rpki.c:351#012; aborting...
Nov 24 12:22:38 frr watchfrr[6779]: [EC 268435457] bgpd state -> down : read returned EOF
Nov 24 12:22:38 frr zebra[5952]: [EC 4043309116] Client 'bgp' encountered an error and is shutting down.
Nov 24 12:22:38 frr zebra[5952]: zebra/zebra_ptm.c:1345 failed to find process pid registration
Nov 24 12:22:38 frr zebra[5952]: client 15 disconnected. 0 bgp routes removed from the rib
I am not really 100% sure what we are really trying to do with this function, but we must
guard against child nodes not having any data.
Fixes: #5440
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When dumping a large bit of table data via bgp_show_table
and if there is no information to display for a particular
`struct bgp_node *` the data allocated via json_object_new_array()
is leaked. Not a big deal on small tables but if you have a full
bgp feed and issue a show command that does not match any of
the route nodes ( say `vtysh -c "show bgp ipv4 large-community-list FOO"`)
then we will leak memory.
Before code change and issuing the above show bgp large-community-list command 15-20 times:
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: > 2GB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: > 2GB
Free small blocks: 31 MiB
Free ordinary blocks: 616 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
After:
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 924 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 558 MiB
Free small blocks: 26 MiB
Free ordinary blocks: 340 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Please note the 340mb of free ordinary blocks is from the fact I issued a
`show bgp ipv4 uni json` command and generated a large amount of data.
Fixes: #5445
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit 5e6a9350c1 implemented an optimization where candidate
configurations are validated only before being displayed. The
validation is done only to create default child nodes (due to
how libyang works) and any possible error is ignored (candidate
configurations can be invalid/incomplete).
The problem is that we were calling lyd_validate() only when the
CLI "with-defaults" option was used. But some cli_show() callbacks
assume that default nodes exist and can crash when displaying a
candidate configuration that isn't validated. To fix this, call
lyd_validate() before displaying candidate configuration even when
"with-defaults" is not used (that was a micro-optimization that
shouldn't have been done).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The previous workaround only works for -O0, at higher optimization
levels gcc reorders the statements in the file global scope which breaks
the asm statement :(.
Fixes: #4563Fixes: #5074
Signed-off-by: David Lamparter <equinox@diac24.net>
For SR-TE we'll need to create Binding-SIDs which are essentially
LSPs that can push multiple outgoing labels. This commit sets the
groundwork for that. Luckily the netlink code didn't need to be
changed since it already supports pushing label stacks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
gcc 4.x does not properly support structs with variable length array
members. Specifically, for global variables, it completely ignores the
array, coming up with a size much smaller than what is correct. This is
broken for both sizeof() as well as ELF object size.
This breaks for frr_interface_info since this variable is in some cases
copy relocated by the linker. (The linker does this to make the address
of the variable a "constant" for the main program.) This copying uses
the ELF object size, thereby copying only the non-array part of the
struct.
Breakage ensues...
(This fix is a bit ugly, but it's limited to very old gcc, and it's
better than changing the array to "nodes[1000]" and wasting memory...)
Fixes: #4563Fixes: #5074
Signed-off-by: David Lamparter <equinox@diac24.net>
In rare situations, the local route in a VNI may not get selected as the
best route. One situation is during a race between bgp and zebra which
was addressed in a prior commit. This change addresses another situation
where due to a change of tunnel IP, it is possible that a received route
may be selected as the best route if the path selection needs to take
next hop IPs into consideration. This is a pretty convoluted scenario,
but the code should handle it and delete and withdraw the local route
as well as (re)install the received route.
Ticket: CM-24114
Reviewed By: CCR-9487
Testing Done:
1. Manual tests - note, problem is not readily reproducible
2. evpn-smoke - results documented in the ticket
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
