BGP code assumes that the extra data is zero'ed out. Ensure that we
are not leaving any situation that the data on the stack is actually all
0's when we pass it around as a pointer later.
Please note in issue #5025, Lou reported a different valgrind
issue, which is not the same issue:
==7313== Conditional jump or move depends on uninitialised value(s)
==7313== at 0x181F9F: subgroup_announce_check (bgp_route.c:1555)
==7313== by 0x1A112B: subgroup_announce_table (bgp_updgrp_adv.c:641)
==7313== by 0x1A1340: subgroup_announce_route (bgp_updgrp_adv.c:704)
==7313== by 0x1A13E3: subgroup_coalesce_timer (bgp_updgrp_adv.c:331)
==7313== by 0x4EBA615: thread_call (thread.c:1531)
==7313== by 0x4E8AC37: frr_run (libfrr.c:1052)
==7313== by 0x1429E0: main (bgp_main.c:486)
==7313==
==7313== Conditional jump or move depends on uninitialised value(s)
==7313== at 0x201C0E: rfapi_vty_out_vncinfo (rfapi_vty.c:429)
==7313== by 0x18D0D6: route_vty_out (bgp_route.c:7481)
==7313== by 0x18DD76: bgp_show_table (bgp_route.c:9365)
==7313== by 0x1930C4: bgp_show_table_rd (bgp_route.c:9471)
==7313== by 0x1932A3: bgp_show (bgp_route.c:9510)
==7313== by 0x193E68: show_ip_bgp_json (bgp_route.c:10284)
==7313== by 0x4E6D024: cmd_execute_command_real.isra.2 (command.c:1072)
==7313== by 0x4E6F51E: cmd_execute_command (command.c:1131)
==7313== by 0x4E6F686: cmd_execute (command.c:1285)
==7313== by 0x4EBF9C4: vty_command (vty.c:516)
==7313== by 0x4EBFB9F: vty_execute (vty.c:1285)
==7313== by 0x4EC250F: vtysh_read (vty.c:2119)
==7313==
that is causing the actual crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Cleanup the interface creation apis to make it more
clear what they are doing.
Make it explicit that the creation via name/ifindex will
only add it to the appropriate list.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If the name has not been set yet (we were only passed the
ifindex in some cases like with master/slave timings) then
do not add/del it from the ifname rb tree on the vrf struct.
Doing so causes duplicate entries on the tree and infinte loops
can happen when iterating over it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were using the incorrect comparison function for the
ifindex-based rb tree. Luckily, we were using the correct one
in RB_GENERATE so I guess that overwrote what was declared in the
prototype?
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Adding ietf routing types yang module to makefile
lib: Adding this yang module to common place
so it can be accessed from all frr modules.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use the `--enable-address-sanitizer` option instead of the manual
version using environment flags.
This also avoids the problem of having to remember to skip clippy with
the custom flags:
```
make -C lib CFLAGS="-g -O2" LDFLAGS="-g" clippy
```
The snippet above is not needed with `--enable-address-sanitizer`!
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We should test for `-fsanitize=memory` instead of `-fsanitize=thread`
when enabling memory sanitizer. While here, fix the error message.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some issues with our internal vector type being typedef'd as `vector`,
which conflicts with the C++ standard vector class...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
There are several places in the pim where we are mixing up
zlog_warn w/ zlog_debug and vice versa. If we are protecting
a zlog_warn w/ a debug is it really a warn? If we have an actual
error situation we should also warn about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't bother tracking ipv6 link locals to determine if a map
should be installed. Every interface has a route of `fe80::/64`
so its just going to return the arbitrarily first one it finds
when it resolves it and hands it back to us.
Instead, just track the interface we specify along with it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fixed memory leak and incorrect json output. Check the full output in the PR:
https://github.com/FRRouting/frr/pull/5118
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
inet_pton() is used to parse ipv4 addresses internally, therefore FRR
does not support octal notation for quads. The ipv4 cli token validator
should make sure that str2prefix() can parse tokens it allows, and
str2prefix uses inet_pton, so we have to disallow leading zeros in ipv4
quads.
In short, 1.1.1.01 is no longer valid and must be expressed as 1.1.1.1.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow systemd to be informed about operational state so operators can
infer a bit about what is going on with FRR from the systemd status
cli.
sharpd@robot ~/frr4> systemctl status frr
● frr.service - FRRouting
Loaded: loaded (/usr/lib/systemd/system/frr.service; enabled; vendor preset: disabled)
Active: active (running) since Thu 2019-10-03 21:09:04 EDT; 7s ago
Docs: https://frrouting.readthedocs.io/en/latest/setup.html
Process: 32455 ExecStart=/usr/lib/frr/frrinit.sh start (code=exited, status=0/SUCCESS)
Status: "FRR Operational"
Tasks: 12 (limit: 4915)
Memory: 76.5M
CGroup: /system.slice/frr.service
├─32468 /usr/lib/frr/watchfrr -d zebra bgpd staticd
├─32487 /usr/lib/frr/zebra -d -A 127.0.0.1 -s 90000000
├─32492 /usr/lib/frr/bgpd -d -A 127.0.0.1
└─32500 /usr/lib/frr/staticd -d -A 127.0.0.1
Please note the `Status: ...` line above.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR supports the ability to turn off the negotation of bgp capabilities.
Provide a few bread crumbs to the operator that it might not be as
useful as they would hope.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp pointer may not be actually found. The debug
message that was using it could get the same value
another way. Convert over
Fixes Coverity Scan Issue:
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We only have a uint32_t value here but clippy is wise and
gives us more data than we need. Tell the compiler we can
throw some stuff away.
This was found by inspecting CI results.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Under high load instances with hundreds of thousands of prefixes this
could result in very unstable systems.
When maximum-prefix is set, but restart timer is not set then the session
flaps between Idle(Pfx) -> Established -> Idle(Pfx) states.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
