When we have these sequence of events causing a crash in
evpn_type5_test_topo1:
(A) no router bgp vrf RED 100
this schedules for deletion the vrf RED instance
(B) a l3vni change event from zebra
this creates a bgp instance for VRF RED in some cases
additionally it auto imports evpn routes into VRF RED
Please note this is desired behavior to allow for the
auto importation of evpn vrf routes
(C) no router bgp 100
The code was allowing the deletion of the default
instance and causing tests to crash.
Effectively the test in bgp_vty to allow/dissallow
the removal of the default instance was not correct
for the case when (B) happens.
Let's just not allow the command to succeed in this case as that
the test was wrong.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When a `no router bgp XXX` is issued and the bgp instance
is in the process of shutting down, do not allow a l3vni
change coming up from zebra to do anything. We can just
safely ignore it at this point in time.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Topology Used:
=============
Cisco---FRR4----FRR2
Initially PIM nbr is down between FRR4----FRR2 from FRR2 side
Cisco is sending BSR packet to FRR4.
Problem Statement:
=================
No shutdown the PIM neighbor on FRR2 towards FRR4.
FRR2, receives BSR packet immediately as the new neighbor
comes up. This BSR packet is having no-forward bit set.
FRR2 is not able to process the BSR packet, and drop the
BSR packet.
Root Cause:
==========
When PIMD comes up, we start BSM timer for 60 seconds.
Here, the value accept_nofwd_bsm is setting to false.
FRR2, when receives no-forward BSR packet, it is getting
accept_nofwd_bsm value as false.
So, it drops, the no-forward BSM packet.
Fix:
===
Set accept_nofwd_bsm as false after first BSM packet received.
Signed-off-by: Sarita Patra <saritap@vmware.com>
update_type1_routes_for_evi() is called from
L3VNI/L2VNI up event, if ESI is not UP then
do not advertise EAD-ES Type-1 route.
Just like from multiple places EAD-ES route
origination checks for its oper status.
Ticket:#3413454
Issue:3413454
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Alpine Linux has LUA_LIB with a broken path, let's use pkg-config to grab
the LUA_LIBS properly.
checking for library containing lua_load... no
configure: error: Lua 5.3 libraries are required to build with Lua support. No other version is supported.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The date for removing some deprecated json attributes from
'show neighbor' has arrived, so remove the attrs (and the
CPP_NOTICE block).
Signed-off-by: Mark Stapp <mjs@labn.net>
When passing a prefix into a function let's pass by address instead
of pass by value. Let's save our stack space.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When cleaning `ripd`, it should free `ctx->name` of `struct if_rmap_ctx`,
not `ctx` itself. Otherwise, it will lead to memory leak.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
All other parsing functions done from bgp_nlri_parse() assume
no attributes == an implicit withdrawal. Let's move
bgp_nlri_parse_flowspec() into the same alignment.
Reported-by: Matteo Memelli <mmemelli@amazon.it>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR's standards state that function declarations should
have actual variable names for parameters passed in.
Let's make this so for bgp_packet.h
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
"show evpn json" returns nothing when evpn is disabled.
Code has been fixed to return {} when evpn is disabled or no entry
available.
Before Fix:-
```
cumulus@r2:mgmt:~$ sudo vtysh -c "show evpn json"
cumulus@r2:mgmt:~$
```
After Fix:-
```
cumulus@r1:mgmt:~$ sudo vtysh -c "show evpn json"
{
}
cumulus@r1:mgmt:~$
```
Ticket:#3417955
Issue:3417955
Testing: UT done
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Signed-off-by: Sindhu Parvathi Gopinathan <sgopinathan@nvidia.com>
During shutdown, the main pthread stops the dplane pthread
before exiting. Don't try to clean up any events scheduled
to the dplane pthread at that point - just let the thread
exit and clean up.
Signed-off-by: Mark Stapp <mjs@labn.net>
If log-pdu-drops is configured, create an INFO log that displays the PDU type and drop counts when a PDU drop is detected.
Example logs:
2023/03/30 23:54:59.749 ISIS: [VAS9N-1JNNR] PDU drop detected of type: P2P IIH. 1 Total Drops; 0 L1 IIH drops; 0 L2 IIH drops; 1 P2P IIH drops; 0 L1 LSP drops; 0 L2 LSP drops; 0 FS LSP drops; 0 L1 CSNP drops; 0 L2 CSNP drops; 0 L1 PSNP drops; 0 L2 PSNP drops.
2023/03/30 23:54:59.848 ISIS: [VAS9N-1JNNR] PDU drop detected of type: P2P IIH. 2 Total Drops; 0 L1 IIH drops; 0 L2 IIH drops; 2 P2P IIH drops; 0 L1 LSP drops; 0 L2 LSP drops; 0 FS LSP drops; 0 L1 CSNP drops; 0 L2 CSNP drops; 0 L1 PSNP drops; 0 L2 PSNP drops.
Code changes:
Add a new PDU counter function that increments the drop counter and runs the logging functionality if log-pdu-drops is configured.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
