when receiving a netlink API for an interface in a namespace, this
interface may come with LINK_NSID value, which means that the interface
has its link in an other namespace. Unfortunately, the link_nsid value
is self to that namespace, and there is a need to know what is its
associated nsid value from the default namespace point of view.
The information collected previously on each namespace, can then be
compared with that value to check if the link belongs to the default
namespace or not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
to be able to retrieve the network namespace identifier for each
namespace, the ns id is stored in each ns context. For default
namespace, the netns id is the same as that value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
as remind, the netns identifiers are local to a namespace. that is to
say that for instance, a vrf <vrfx> will have a netns id value in one
netns, and have an other netns id value in one other netns.
There is a need for zebra daemon to collect some cross information, like
the LINK_NETNSID information from interfaces having link layer in an
other network namespace. For that, it is needed to have a global
overview instead of a relative overview per namespace.
The first brick of this change is an API that sticks to netlink API,
that uses NETNSA_TARGET_NSID. from a given vrf vrfX, and a new vrf
created vrfY, the API returns the value of nsID from vrfX, inside the
new vrf vrfY.
The brick also gets the ns id value of default namespace in each other
namespace. An additional value in ns.h is offered, that permits to
retrieve the default namespace context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
an incoming bridge index has been found, that is linked with vxlan
interface, and the search for that bridge interface is done. In
vrf-lite, the search is done across the same default namespace, because
bridge and vxlan may not be in the same vrf. But this behaviour is wrong
when using vrf netns backend, as the bridge and the vxlan have to be in
the same vrf ( hence in the same network namespace). To comply with
that, use the netnamespace of the vxlan interface. Like that, the
appropriate nsid is passed as parameter, and consequently, the search is
correct, and the mac address passed to BGP will be ok too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
other network namespaces are parsed because bridge interface can be
bridged with vxlan interfaces with a link in the default vrf that hosts
l2vpn.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With vrf-lite mechanisms, it is possible to create layer 3 vnis by
creating a bridge interface in default vr, by creating a vxlan interface
that is attached to that bridge interface, then by moving the vxlan
interface to the wished vrf.
With vrf-netns mechanism, it is slightly different since bridged
interfaces can not be separated in different network namespaces. To make
it work, the setup consists in :
- creating a vxlan interface on default vrf.
- move the vxlan interface to the wished vrf ( with an other netns)
- create a bridge interface in the wished vrf
- attach the vxlan interface to that bridged interface
from that point, if BGP is enabled to advertise vnis in default vrf,
then vxlan interfaces are discovered appropriately in other vrfs,
provided that the link interface still resides in the vrf where l2vpn is
advertised.
to import ipv4 entries from a separate vrf, into the l2vpn, the
configuration of vni in the dedicated vrf + the advertisement of ipv4
entries in bgp vrf will import the entries in the bgp l2vpn.
the modification consists in parsing the vxlan interfaces in all network
namespaces, where the link resides in the same network namespace as the
bgp core instance where bgp l2vpn is enabled.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the link information of vxlan interface is populated in layer 2
information, as well as in layer 2 vxlan information. This information
will be used later to collect vnis that are in other network namespaces,
but where bgp evpn is enabled on main network namespaces, and those vnis
have the link information in that namespace.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Description:
When a routemap applied to set a tag, all the permitted routes are
refreshed with new tag, but when a different route map applied with
a different action still the same tag persits in the external route.
The actual tag received from zebra is expected to be set back to the
routes here. Corrected this behaviour by restoring a original tag
received from zebra.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
Route-tag is not set to external lsas originated by ospf when a routemap
applied by setting a specific tag. When applying a route-map on redistribution,
external lsas will be refreshed if there is any change in the route parametrs
after applying routemap. But changing tag is not handled here.
Added the apripriate fix to correct this.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Now that the "frr-interface" list has a "state" container, move the
IS-IS interface state nodes underneath it using a new augmentation.
Also, update the IS-IS SR topotest to account for this change. Make
use of symlinks where possible to avoid having multiple files with
the same content.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When fetching the next route node in the RIB, skip the empty ones
to avoid calling other northbound callbacks later unnecessarily.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The motivation for this change is that IPv6 link-local routes don't
conform to the zebra YANG module since they all have the same prefix
(fe80::/64), but zebra's YANG module require each route to have
an unique prefix (the key of the "rib" list). This violation can
cause problems when iterating over the RIB asynchronously, so skip
those routes.
At the end of the day nobody cares about link-local routes anyway :)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a null check to solve the problem (circuit->u.bc.adjdb[level - 1]
is guaranteed to be non-null only on L1/L2 areas).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When checking if a nexthop is active, if it has been marked as onlink,
just check on the presence and status of the nexthop's interface. When
handling client request to create a route, if the client says that the
nexthop is onlink, trust it; when internally (in zebra) determining
that the nexthop is onlink, ensure it is only done in the case of an
interface with a /32 IP address which is the case for OSPF unnumbered.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Stephen Worley <sworley@cumulusnetworks.com>
Non-best paths (path info structures) also need to be freed during
table cleanup not only to release their memory but to also ensure
any linkages are updated correctly. One such example is for EVPN
where there is a link between the imported path info (in a L2 or
L3 vrf instance) and its parent path info.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
This reverts commit 0f9f74baeb.
This commit was causing crashes and the goal of this commit
was to make coverity sanity happy. I'd rather have coverity
sad and not have ospfv3 crash
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Original start/stop of FRR prior to David's rewrite in
PR 3507, when configuring multi-instance would
only start multi-instance (-1 -2 -3 -4...) or
just the daemon, not both. If you happened
to start a ospfd instance of 1 then both
the default and instance 1 would react to cli.
Do not allow this, put it back to original behavior
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
to make sure that c++ code can include them, avoid using reserved
keywords like 'delete' or 'new'.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
* Regroup fonctions to install label for Prefix and Adjacency SID
* Change 'replace_semantics' variable name by 'make_before_break' in
sr_prefix_reinstall() function and adjust comments
* Call directly lsp_regenerate_schedule() from isis_nb_config.c when MSD
is updated
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
* Rename functions following rules: isis_sr_XXX is kept for external functions
and isis_sr prefix remove for static ones
* Rename local_label & remote_label variables by input_label & output_label
* Change parameter order (to follow other functions) in sr_node_srgb_update()
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
* Rename RB-TREE variable from tree_sr_XXX to srdb_XXX
* Replace parse_flags by an enum and rename it srdb_state which reflects
more the role of this flag: determined the state of SR-Node and SR-Prefix
stored in the SRDB: VALIDATED, NEW, MODIFIED, UNCHANGED
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
