The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During a debugging session last night I discovered that I was
still having some `fun` figuring out why zebra was not making
a route's nexthop active. After some debugging I figured out
that I was missing some states that we could end up in that
didn't have debug information about what happened in nexthop_active.
Add the missing breadcrumbs for nexthop resolution. In addition
add a bit of code to notice the ebgp state without recursion turned
on and to let the user know about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
on some cases, kernel routes are not selected, because the kernel
suppressed it without informing the netlink layer that the route has
been suppressed ( for instance, when an interface goes down, the route
never goes back when interface goes up again). This commit intends to
suppress that entry from zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Allow the modification of whether or not we will allow
BUM flooding on the vxlan bridge. To do this allow
the upper level protocol to specify via the ZEBRA_VXLAN_FLOOD_CONTROL
zapi message.
If flooding is disabled then BUM traffic will not be forwarded
to other VTEP's.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
The condition in the do/while is always false because 'return_nsid' cannot
reach the end of the loop with 'return_nsid' having a different value than
NS_UNKNOWN. Because of that, the condition can be replaced with 0 (false).
Also, the loop can be removed because the two assignments made at the end
of the loop before the condition check are not used (detected via Clang,
afterwards).
Signed-off-by: F. Aragon <paco@voltanet.io>
Conditional code in netlink_macfdb_update() introduced in 2232a77c used
the 'dst_present' variable because not all cases were covered. Now it is
not necessary.
Signed-off-by: F. Aragon <paco@voltanet.io>
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unnecesary redeclaration of already-defined enum 'dp_results' removed.
Can be detected via static analysis with e.g.
./configure CFLAGS=-Wgnu-redeclared-enum CC=clang
Signed-off-by: F. Aragon <paco@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All I can see is an unneccessary complication. If there's some purpose
here it needs to be documented...
Signed-off-by: David Lamparter <equinox@diac24.net>
When we receive a v6 RA packet with an optional
ND_OPT_SOURCE_LINKADDR take that data and construct the
v4 to v6 neighbor entry for that interface to allow
v4 w/ v6 nexthops to work with only global v6 addresses
on an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Abstract the mac neigh installation for 169.254.0.1 into
it's own function that we can pass the mac address into.
This will allow a future commit to use this functionality
when we have the appropriate mac address from reading
optional attributes of a RA packet.
Signed-off-by: Donald Sharp <sharpd@cumuusnetworks.com>
This change makes the zebra acting as label manager proxy not to relay non-LM
messages to clients that a zebra acting in non-proxy mode may send to it. Also,
the existing code does not schedule a rcv in case of relay_response_back
returns -1. This patch re-schedules reads on the socket even in case such a
function returns -1 by calling thread_add_read().
Signed-off-by: F. Aragon <paco@voltanet.io>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
The block comments from a couple commits were not following
proper style. Fix.
Fix SA warning that had snuck in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Netdevices are not sorted in any fashion by the kernel during the initial
interface nldump. So you can get an upper device (such as an SVI) before
its corresponding lower device (bridge).
To fix this problem we skip resolving link dependencies during handling of
nldump notifications. Resolving instead at the end (when all the devices
are present)
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Ticket: CM-22388, CM-21796
Reviewed By: CCR-7845
Testing Done:
1. verified on a setup with missing linkages
2. automation - evpn-min
Ensure that when the is_router condition changes for a locally learnt
neighbor, it is informed to BGP only if it is active i.e., the MAC is
also locally learnt.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
1. Failed test
2. vxlan_routing_test.py
Use boolean variables instead of unsigned int for certain VxLAN-EVPN
flags which are really used as boolean.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22288
Reviewed By: CCR-7832
Testing Done:
Along with a subsequent, related commit
When a remote MAC goes away, but there are neighbors referring to it,
ensure that when the last remote neighbor goes away, the MAC is
uninstalled from the kernel and no longer considered as remote.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-22130
Reviewed By: CCR-7777
Testing Done:
1. Replicated failed scenario and verified with fix.
2. evpn-min
When a MAC moves from local to remote, a replace is allowed, EVPN
no longer has to delete the local MAC before installing the remote
MAC.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
So the linux kernel uses the RT_TABLE_MAIN for the table
id used for ip routing. The multicast routing tables use
RT_TABLE_DEFAULT. We changed the internal code of zebra_vrf
a few months back to use RT_TABLE_MAIN as the tableid to
use. This caused the pim sg stats to stop working because
of the kernel bug where it uses a different table
for ip routing and ip multicast.
Put a bit of a special case in to do the right thing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When debugging the mroute code path in zebra, add a bit of additional
data to allow us to know what is going on a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Newer linux kernels apparently send data down the netlink
bus for the creation of mroutes. Add a bit of code
to notice this and to handle it appropriately( ie do
nothing at this point in time ) as that the correct
place to do this is in the pim socket in pimd.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are displaying data about a netlink message
in debugs or errors, print out the message type
as a string instead of a number.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were linking all libs and binaries against libprotobuf-c if the
option was enabled... that makes no sense at all.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
Debugging inactive nexthops in zebra can be quite difficult
and non-obvious what has gone wrong. Add detailed rib
debugs for the cases where we decide that a nexthop is
inactive so that we can more easily debug a reason
for the failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _route_entry_dump function was not handling the nexthop as passed
in from an upper level protocol appropriate and as such not displaying
the v4/v6 nexthop right in the case where we have both going.
Additionally dump the nexthop vrf as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RB-Tree used to store rmac information was not properly
handling the v6 address family. Modify the code to allow
this handling.
Cleans up this error message:
zebra[2231]: host_rb_entry_compare: Unexpected family type: 10
That is being seen, This fixes some connectivity issues being seen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This crash occurs only with netns implementation.
vrf meaning is different regarging its implementation (netns or
vrf-lite)
- With vrf-lite implementation vrf is a property of the interface that
can be changed as the speed or the state (iproute2 command: "ip link
set dev IF_NAME master VRF_NAME"). All interfaces of the system are in
the same netns and so interface name is unique.
- With netns implementation vrf is a characteristic of the interface
that CANNOT be changed: it is the id of the netns where the interface
is located. To change the vrf of an interface (iproute2 command to
move an interface "ip netns exec VRF_NAME1 ip link set dev IF_NAME
netns VRF_NAME2") the interface is deleted from the old vrf and
created in the new vrf.
Interface name is not unique, the same name can be present in the
different netns (typically the lo interface) and search of interface
must be done by the tuple (interface name, netns id).
Current tests on the vrf implementation (vrf-lite or netns) are not
sufficient. In some cases (for example when an interface is moved from
a vrf X to the default vrf and then move back to VRF X) we can have a
corruption message and then a crash of zebra.
To avoid this corruption test on the vrf implementation, needed when an
interface changes, has been rewritten:
- For all interface changes except deletion the if_get_by_name function,
that checks if an interface exists and creates or updates it if
needed, is changed:
* The vrf-lite implementation is unchanged: search of the interface
is based only on the name and update the vrf-id if needed.
* The netns implementation search of the interface is based on the
(name, vrf-id) tuple and interface is created if not found, the
vrf-id is never updated.
- deletion of an interface (reception of a RTM_DELLINK netlink message):
* The vrf-lite implementation is unchanged: the interface
information are cleared and the interface is moved to the default
vrf if it does not belong to (to allow vrf deletion)
* The netns implementation is changed: only the interface
information are cleared and the interface stays in its vrf to
avoid conflict with interface with the same name in the default
vrf.
This implementation reverts (partially or totally):
commit 393ec5424e ("zebra: fix missing node attribute set in ifp")
commit e9e9b1150f ("lib: create interface even if name is the same")
commit 9373219c67 ("zebra: improve logs when replacing interface to an
other netns")
Fixes: b53686c52a ("zebra: delete interface that disappeared")
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when interface is a virtual ethernet interface, then there is no need to
update link pointer of interface.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There exists a possibility that the ifindex we are passed
does not exist and as such we should check for it not
resolving as part of the debug.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case the default netns has a netns path, then a new NETNS
creation will be bypassed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This function is changed so that the interface index is searched across
the correct namespace.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a header to cleanup no declaration and properly
wrapper some variables to appropriate #ifdef.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
