Adds a generalized martian reimport function used for triggering a
relearn/reimport of EVPN routes that were previously filtered/deleted
as a result of a "self" check (either during import or by a martian
change handler). The MAC-VRF SoO is the first consumer of this function,
but can be expanded for use with Martian Tunnel-IPs, Interface-IPs,
Interface-MACs, and RMACs.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
The idea is to drop unwanted attributes from the BGP UPDATE messages and
continue by just ignoring them. This improves the security, flexiblity, etc.
This is the command that Cisco has also.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When the last IPv4 address of an interface is deleted, Linux removes all
routes includes BGP ones using this interface without any Netlink
advertisement. bgpd keeps them in RIB as valid (e.g. installed in FIB).
The previous patch invalidates the associated nexthop groups in zebra
but bgpd is not notified of the event.
> 2022/05/09 17:37:52.925 ZEBRA: [TQKA8-0276P] Not Notifying Owner: connected about prefix 29.0.0.0/24(40) 3 vrf: 7
Look for the bgp_path_info that are unsynchronized with the kernel and
flag them for refresh in their attributes. A VPN route leaking update is
calles and the refresh flag triggers a route refresh to zebra and then a
kernel FIB installation.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Previous commits have introduced a new 8 bits nh_flag in the attr
struct that has increased the memory footprint.
Move the mp_nexthop_prefer_global boolean in the attr structure that
takes 8 bits to the new nh_flag in order to go back to the previous
memory utilization.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
At bgpd startup, VRF instances are sent from zebra before the
interfaces. When importing a l3vpn prefix from another local VRF
instance, the interfaces are not known yet. The prefix nexthop interface
cannot be set to the loopback or the VRF interface, which causes setting
invalid routes in zebra.
Update route leaking when the loopback or a VRF interface is received
from zebra.
At a VRF interface deletion, zebra voluntarily sends a
ZEBRA_INTERFACE_ADD message to move it to VRF_DEFAULT. Do not update if
such a message is received. VRF destruction will destroy all the related
routes without adding codes.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
If 'network import-check' is defined on the source BGP session, prefixes
that are stated in the network command cannot be leaked to the other
VRFs BGP table even if they are present in the origin VRF RIB if the
'rt import' statement is defined after the 'network <prefix>' ones.
When a prefix nexthop is updated, update the prefix route leaking. The
current state of nexthop validation is now stored in the attributes of
the bgp path info. Attributes are compared with the previous ones at
route leaking update so that a nexthop validation change now triggers
the update of destination VRF BGP table.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
In order to send correct SRv6 L3VPN advertisement, we need to save
srv6_locator_chunk in vpn_policy. With this information, we can
construct correct SRv6 L3VPN advertisement packets.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
When a route imported from l3vpn is analysed, the nexthop from default
VRF is looked up against a valid MPLS path. Generally, this is done on
backbones with a MPLS signalisation transport layer like LDP. Generally,
the BGP connection is multiple hops away. That scenario is already
working.
There is case where it is possible to run L3VPN over GRE interfaces, and
where there is no LSP path over that GRE interface: GRE is just here to
tunnel MPLS traffic. On that case, the nexthop given in the path does not
have MPLS path, but should be authorized to convey MPLS traffic provided
that the user permits it via a configuration command.
That commit introduces a new command that can be activated in route-map:
> set l3vpn next-hop encapsulation gre
That command authorizes the nexthop tracking engine to accept paths that
o have a GRE interface as output, independently of the presence of an LSP
path or not.
A configuration example is given below. When bgp incoming vpnv4 updates
are received, the nexthop of NLRI is 192.168.0.2. Based on nexthop
tracking service from zebra, BGP knows that the output interface to reach
192.168.0.2 is r1-gre0. Because that interface is not MPLS based, but is
a GRE tunnel, then the update will be using that nexthop to be installed.
interface r1-gre0
ip address 192.168.0.1/24
exit
router bgp 65500
bgp router-id 1.1.1.1
neighbor 192.168.0.2 remote-as 65500
!
address-family ipv4 unicast
no neighbor 192.168.0.2 activate
exit-address-family
!
address-family ipv4 vpn
neighbor 192.168.0.2 activate
neighbor 192.168.0.2 route-map rmap in
exit-address-family
exit
!
router bgp 65500 vrf vrf1
bgp router-id 1.1.1.1
no bgp network import-check
!
address-family ipv4 unicast
network 10.201.0.0/24
redistribute connected
label vpn export 101
rd vpn export 444:1
rt vpn both 52:100
export vpn
import vpn
exit-address-family
exit
!
route-map rmap permit 1
set l3vpn next-hop encapsulation gre
exit
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
bgp_attr.h has function declarations that are
not properly aligned with our standard on how
to do so. Fix.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp_attr_undup does the same thing as bgp_attr_flush – frees the
temporary data that might be allocated when applying a route-map. There
is no need to have two separate functions for that.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This is the initial work to move all non IPv4/IPv6 AFI related
attributes/structs to attr->extra to avoid unnecesarry allocations.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
draft-ietf-bess-srv6-services-07 defines new SID structure Sub-Sub-TLV.
This patch adds SID structure information to bgp_attr_srv6_l3vpn. This
patch also defines default SID stucture used by following patches.
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
There are two changes in this commit -
1. Maintain a list of global MAC-IP routes per-ES. This list is maintained
for quick processing on the following events -
a. When the first VTEP/PE becomes active in the ES-VRF, the L3 NHG is
activated and the route can be sent to zebra.
b. When there are no active PEs in the ES-VRF the L3 NHG is
de-activated and -
- If the ES is present in the VRF -
The route is not installed in zebra as there are no active PEs for
the ES-VRF
- If the ES is not present in the VRF -
The route is installed with a flat multi-path list i.e. without L3NHG.
This is to handle the case where there are no locally attached L2VNIs
on the ES (for that tenant VRF).
2. Reinstall VRF route when an ES is installed or uninstalled in a
tenant VRF (the global MAC-IP list in #1 is used for this purpose also).
If an ES is present in the VRF we use L3NHG to enable fast-failover of
routed traffic.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Convert usage of the attr->evpn_overlay to get/set functionality.
Future commits will allow us to abstract this data to when
we actually need it for the `struct attr`.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Abstract the access of `attr->cluster` to appropriate
accessor/set functionality.
Future commits will allow us to move this data around
to make `struct attr` smaller.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
