This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Use a local variable to avoid trying to take the address
of a packed struct member - an address from the ip header
in these cases.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
PR 5118 introduce additional (prepend) keywords
like 'ip' to Route Distinguisher output which
breaks existing evpn route show commands parsing.
Restore to original behavior.
Testing Done:
vtysh -c 'show bgp l2vpn evpn route'
Before fix:
Route Distinguisher: ip 27.0.0.15:44
Post fix:
Route Distinguisher: 27.0.0.15:44
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The opaque lsa that we are storing is stored on various
lists depending on it's type. This removal from the
list was being done *after* the pointer was freed. This
is not a good idea. Since the use after free was just
removal from a linked list and the freeing function does
not do anything other than free data, than just switching the function
order should be sufficient.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Recently had a case where I was attempting to debug a nexthop tracking
issue across multiple bgp vrf's and since the setup vrf's in it with
overlapping address ranges, it became real fun real fast to track
vrf data associated. Add a bit of code to allow us to figure out
what vrf we are in when we print out debug messages.
Look through the rest of the code and find debugs where we are
not using bgp->name_pretty and switch it over.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prevent IPv6 Link-local address being forward to IBGP peer,
which are not directly connected.
R1----IPV6-unnumbered-EBGP-------R2-----IPV6-IBGP-----R3
Configure route-map to set preferred global address on and apply
route-map-IN on R2 for R1-R2 session. Now check on R3's BGP and
RIB table has route nexthop as R1 link-local address, which is
not correct.
As of now we clear link-local address info from mp_nexthop_global,
only if mp_nexthop_global is populated with link-local address.
We should do it even if route-map is configured boz forwarding
link-local address from one link scope to another is violation of
the standards.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
This commit make bgpd to skip and ignore unsupported
sub-type of PREFIX_SID. (especially new defined sub-type)
Current bgpd can't parase unsupported sub-type of PREFIX_SID.
PREFIX_SID is drafted on draft-ietf-idr-bgp-prefix-sid-27.
There are already new sub-type drafted on
draft-dawra-idr-srv6-vpn-05. (Type5,6 is new defined.)
This commit fix the problem reported as #5277 on GitBub.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The final test case of this topotest wasn't really testing
anything. Do the following changes to fix this:
* Remove "no link-detect" from the zebra configs so that link down
failures are detected immediately;
* After shutting down the interface between r1 and r2, wait five
seconds before testing if the pseudowires reconverged through
the r3 router.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to make some tests work correctly. Only topologies
created using the topogen framework benefit from this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some authors are added in the "GPL-2+" section, notably Alexandre
Cassen for the code in `vrrpd/`, and Cumulus Networks and Open Source
Routing which were uncredited despite many occurrence in the headers.
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
We were creating `other` tables in rib_del(), vty commands, and
dataplane return callback via the zebra_vrf_table_with_table_id()
API.
Seperate the API into only a lookup, never create
and added another with `get` in the name (following the standard
we use in other table APIs).
Then changed the rib_del(), rib_find_rn_from_ctx(), and show route
summary vty command to use the lookup API instead.
This was found via a crash where two different vrfs though they owned
the table. On delete, one free'd all the nodes, and then the other tried
to use them. It required specific timing of a VRF existing, going away,
and coming back again to cause the crash.
=23464== Invalid read of size 8
==23464== at 0x179EA4: rib_dest_from_rnode (rib.h:433)
==23464== by 0x17ACB1: zebra_vrf_delete (zebra_vrf.c:253)
==23464== by 0x48F3D45: vrf_delete (vrf.c:243)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== by 0x13D8C5: sigint (main.c:172)
==23464== by 0x48DD25C: quagga_sigevent_process (sigevent.c:105)
==23464== by 0x48F0502: thread_fetch (thread.c:1417)
==23464== by 0x48AC82B: frr_run (libfrr.c:1023)
==23464== by 0x13DD02: main (main.c:483)
==23464== Address 0x5152788 is 104 bytes inside a block of size 112 free'd
==23464== at 0x48369AB: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B25B8: qfree (memory.c:129)
==23464== by 0x48EA335: route_node_destroy (table.c:500)
==23464== by 0x48E967F: route_node_free (table.c:90)
==23464== by 0x48E9742: route_table_free (table.c:124)
==23464== by 0x48E9599: route_table_finish (table.c:60)
==23464== by 0x170CEA: zebra_router_free_table (zebra_router.c:165)
==23464== by 0x170DB4: zebra_router_release_table (zebra_router.c:188)
==23464== by 0x17AAD2: zebra_vrf_disable (zebra_vrf.c:222)
==23464== by 0x48F3F0C: vrf_disable (vrf.c:313)
==23464== by 0x48F3CCF: vrf_delete (vrf.c:223)
==23464== by 0x48F4468: vrf_terminate (vrf.c:532)
==23464== Block was alloc'd at
==23464== at 0x4837B65: calloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==23464== by 0x48B24A2: qcalloc (memory.c:110)
==23464== by 0x48EA2FE: route_node_create (table.c:488)
==23464== by 0x48E95C7: route_node_new (table.c:66)
==23464== by 0x48E95E5: route_node_set (table.c:75)
==23464== by 0x48E9EA9: route_node_get (table.c:326)
==23464== by 0x48E1EDB: srcdest_rnode_get (srcdest_table.c:244)
==23464== by 0x16EA4B: rib_add_multipath (zebra_rib.c:2730)
==23464== by 0x1A5310: zread_route_add (zapi_msg.c:1592)
==23464== by 0x1A7B8E: zserv_handle_commands (zapi_msg.c:2579)
==23464== by 0x19D689: zserv_process_messages (zserv.c:523)
==23464== by 0x48F09F8: thread_call (thread.c:1599)
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
