FreeBSD's libc segfaults when vsnprintf() is called with a null
format string. Add a null check before calling vsnprintf() to
resolve this problem.
Fixes#3537
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When installing routes via sharpd 'sharp install route... ' command
add the ability to specify a nexthop-group to use. This will
allow sharpd to create ECMP routes into zebra.
Nexthop-group:
!
nexthop-group JANELLE
nexthop 192.168.209.1
nexthop 192.168.210.1
!
The install:
donna.cumulusnetworks.com# sharp install routes 10.0.50.0 nexthop-group JANELLE 10
donna.cumulusnetworks.com# end
donna.cumulusnetworks.com# show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route
K>* 0.0.0.0/0 [0/106] via 10.0.2.2, enp0s3, 00:20:38
C>* 10.0.2.0/24 is directly connected, enp0s3, 00:20:38
D>* 10.0.50.0/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.1/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.2/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.3/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.4/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.5/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.6/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.7/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.8/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
D>* 10.0.50.9/32 [150/0] via 192.168.209.1, enp0s8, 00:00:02
* via 192.168.210.1, enp0s9, 00:00:02
C>* 192.168.209.0/24 is directly connected, enp0s8, 00:20:38
C>* 192.168.210.0/24 is directly connected, enp0s9, 00:20:38
donna.cumulusnetworks.com#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the sharp daemon to understand and use nexthop-groups.
This commit is merely to allow sharpd to understand them
when accepted in a future commit
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the route_add function to take nexthop groups. Future commits
will allow sharpd to use nexthop groups as the install mechanism
for routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
DEFPY commands are easier to maintain and less susceptible to
bugs. In the long term we should try to merge the plethora of
"show ip ospf neighbor" commands (total of 14) into a single DEFPY.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This code addition allows eigrp to set/unset the router-id
value. At this point I am not 100% sure that we do all the necessary
rework when a router-id changes. But on startup if read in before
a network statement we should be ok.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In eigrp we were using a uint32_t to hold the `struct in_addr` data
for the router id values. This caused us to do unnecessary conversions
pre and post for in/out. Let's just use the standard `struct in_addr`
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Let's write the eigrp config even if we have no network statements
as that the other functions return safely if nothing to do here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The static daemon is setting up the prefix for printing
before it is decoded when we get notified about our
route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in order to enforce the vrf_id to return, from a vrf name, a check is
done on the vrf_name_to_id callback.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
We must open the PF_KEY socket before dropping privileges, otherwise the
socket creation will fail with permission problems.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This commit is the last missing piece to complete BGP LU support in bgpd. To this moment, bgpd (and zebra) supported auto label assignment only for prefixes leaked from VRFs to vpn and for MPLS SR prefixes. This adds auto label assignment to other routes types in bgpd. The following enhancements have been made:
* bgp_route.c:bgp_process_main_one() now sets implicit-null local_label to all local, aggregate and redistributed routes.
* bgp_route.c:bgp_process_main_one() now will request a label from the label pool for any prefix that loses the label for some reason (for example, when the static label assignment config is removed)
* bgp_label.c:bgp_reg_dereg_for_label() now requests labels from label pool for routes which have no associated label index
* zebra_mpls.c:zebra_mpls_fec_register() now expects both label and label_index from the calling function, one of which must be set to MPLS_INVALID_LABEL or MPLS_INVALID_LABEL_INDEX, based on this it will decide how to register the provided FEC.
Signed-off-by: Anton Degtyarev <anton@cumulusnetworks.com>
This doc is .. include::'d in snmp.rst and needs to be ignored as part
of the main toctree build. This patch squashes a Sphinx build warning.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Reduce the zebra rib workqueue retry timeout, used when the queue
towards the zebra dataplane has reached its limit. Lowering the
value was reported to improve update throughput on some platforms.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The label processing for socket installs was not ensuring
that each nexthop would not accidently use the last
nexthops value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The test we were using to ensure that a mask was sent in
is a bit redundant, let's just always send it in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ADD/DELETE messages are the only ones we support, so leave
early from the function, in other words don't check it every
nexthop loop.
Additionally nexthops only care about non recursive active flags.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I'm going to rearrage the kernel_rtm_ipv4 and v6 functions
so the sin6_masklen needs to be moved a bit earlier.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The write function converted to v4 and v6 functions to a union sockunion
via casting. Just use `union sockunion` instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These two commands previously required the whole original command but
we should allow the user to shorten out this since the data at the
end is not required to figure out what to delete.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
