The parser for extended communities was incorrectly disallowing an
operator from configuring "Route Origin" extended communities
(e.g. RD/RT/SoO) with a 4-byte value matching BGP_AS4_MAX (UINT32_MAX)
and allowed the user to overflow UINT32_MAX. This updates the parser to
read the value as a uint64_t so that we can do proper checks on the
upper bounds (> BGP_AS4_MAX || errno).
before:
```
TORC11(config-router-af)# neighbor uplink-1 soo 4294967296:65
TORC11(config-router-af)# do sh run | include soo
neighbor uplink-1 soo 0:65
TORC11(config-router-af)# neighbor uplink-1 soo 4294967295:65
% Malformed SoO extended community
TORC11(config-router-af)#
```
after:
```
TORC11(config-router-af)# neighbor uplink-1 soo 4294967296:65
% Malformed SoO extended community
TORC11(config-router-af)# neighbor uplink-1 soo 4294967295:65
TORC11(config-router-af)# do sh run | include soo
neighbor uplink-1 soo 4294967295:65
TORC11(config-router-af)#
```
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
When daemons transition to mgmtd they should stop reading their split config
files, and let mgmtd do that, otherwise things can get out of sync.
Signed-off-by: Christian Hopps <chopps@labn.net>
The json structure changes used for 'json detail' show commands are not
very straightforward and might require code analysis to understand.
This addscommentary to the flow to explain the change in structure.
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
At this point OSPF NSSA deserves a dedicated topotest given the
latest nerd knobs that were added :)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Implement NSSA address ranges as specified by RFC 3101:
NSSA border routers may be configured with Type-7 address ranges.
Each Type-7 address range is defined as an [address,mask] pair. Many
separate Type-7 networks may fall into a single Type-7 address range,
just as a subnetted network is composed of many separate subnets.
NSSA border routers may aggregate Type-7 routes by advertising a
single Type-5 LSA for each Type-7 address range. The Type-5 LSA
resulting from a Type-7 address range match will be distributed to
all Type-5 capable areas.
Syntax:
area A.B.C.D nssa range A.B.C.D/M [<not-advertise|cost (0-16777215)>]
Example:
router ospf
router-id 1.1.1.1
area 1 nssa
area 1 nssa range 172.16.0.0/16
area 1 nssa range 10.1.0.0/16
!
Since regular area ranges and NSSA ranges have a lot in common,
this commit reuses the existing infrastructure for area ranges as
much as possible to avoid code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Update the "range" helpers to accept an area pointer instead of
an area ID;
* Always call ospf_area_display_format_set() after every "range"
command to ensure consistency.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the "default-information-originate" option to the "area X nssa"
command. That option allows the origination of Type-7 default routes
on NSSA ABRs and ASBRs.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine all variation of the "area nssa" command into a single
DEFPY to improve code maintainability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The startup config and how it interacts with explicit commits,
commit databases and implicit commits needs to be worked out
in design first. For now remove the offending code.
Signed-off-by: Christian Hopps <chopps@labn.net>
Prior to this the full retry cycle was run with a "passing" negative
result each time through
Previous runtime ~5 minutes
New runtime ~20 seconds.
Signed-off-by: Christian Hopps <chopps@labn.net>
two things:
On shutdown cleanup any events associated with the update walker.
Also do not allow new events to be created.
Fixes this mem-leak:
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790:Direct leak of 8 byte(s) in 1 object(s) allocated from:
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #0 0x7f0dd0b08037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #1 0x7f0dd06c19f9 in qcalloc lib/memory.c:105
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #2 0x55b42fb605bc in rib_update_ctx_init zebra/zebra_rib.c:4383
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #3 0x55b42fb6088f in rib_update zebra/zebra_rib.c:4421
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #4 0x55b42fa00344 in netlink_link_change zebra/if_netlink.c:2221
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #5 0x55b42fa24622 in netlink_information_fetch zebra/kernel_netlink.c:399
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #6 0x55b42fa28c02 in netlink_parse_info zebra/kernel_netlink.c:1183
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #7 0x55b42fa24951 in kernel_read zebra/kernel_netlink.c:493
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #8 0x7f0dd0797f0c in event_call lib/event.c:1995
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #9 0x7f0dd0684fd9 in frr_run lib/libfrr.c:1185
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #10 0x55b42fa30caa in main zebra/main.c:465
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790- #11 0x7f0dd01b5d09 in __libc_start_main ../csu/libc-start.c:308
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790-
./msdp_topo1.test_msdp_topo1/r2.zebra.asan.1117790-SUMMARY: AddressSanitizer: 8 byte(s) leaked in 1 allocation(s).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The changes involve adding show debuggin command for MGMTd which resolves
command incomplete issue.
issue #13154
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
Following correction of IS-IS subnet creation, this patch adjust the way the
TED is created in sharpd to automatically adjust subnet deletion.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Subnets may be incorrectly created in the IS-IS Traffic Engineering Database
(TED). Indeed, to be usable, the subnets advertised by IS-IS peers must be
adjusted to avoid misinterpretation. For example, consider R1 which is
connected to R2 with IP addresses 10.0.0.1/24 (R1) and 10.0.0.2/24 (R2).
R1 and R2 will advertize the prefix 10.0.0.0/24. By leaving the subnet with the
prefix 10.0.0.0/24 in the TED, it is not possible to determine whether
10.0.0.1 is attached to R1 or R2 or whether 10.0.0.3 exists.
So to avoid this, the subnet prefixes are adjusted with the IP addresses of the
local interface. But IS-IS can start to advertise the subnet when not all
adjacencies are up, especially when IPv4 and IPv6 are configured on the same
interface. This results in an uncorrected prefix, e.g. 10.0.0.0/24, remaining
in the TED when it should be removed.
This problem affects some isis-related tests such as the CSPF test.
This patch fixes this bug by removing the uncorrected prefix before adding the
the corrected version.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Fix for missing neighbor description in "show bgp summary [wide]"
when its length exceeds 20[64] chars and it doesn't contain
withespaces.
Existing behavior remains if description contains whitespaces
before size limit.
Signed-off-by: rbarroetavena <rbarroetavena@gmail.com>
Test failed time to time, let's try this way:
```
$ for x in $(seq 1 20); do cp test_bgp_labeled_unicast_addpath.py test_$x.py; done
$ sudo pytest -s -n 20
```
Ran 10 times using this pattern, no failure 🤷
Before this change, we checked advertised routes, and at some point `=` was
missing from the output, but advertised correctly. Receiving router gets as
much routes as expected to receive.
I reversed checking received routes, not advertised.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Memory leaks are observed in the cleanup code. When “no router bgp" is executed,
cleanup in that flow for aggregate-address command is not taken care.
fixes the below leak:
--
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444:Direct leak of 152 byte(s) in 1 object(s) allocated from:
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #0 0x7f163e911037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #1 0x7f163e4b9259 in qcalloc lib/memory.c:105
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #2 0x562bf42ebbd5 in bgp_aggregate_new bgpd/bgp_route.c:7239
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #3 0x562bf42f14e8 in bgp_aggregate_set bgpd/bgp_route.c:8421
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #4 0x562bf42f1e55 in aggregate_addressv6_magic bgpd/bgp_route.c:8592
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #5 0x562bf42be3f5 in aggregate_addressv6 bgpd/bgp_route_clippy.c:341
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #6 0x7f163e3f1e1b in cmd_execute_command_real lib/command.c:988
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #7 0x7f163e3f219c in cmd_execute_command lib/command.c:1048
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #8 0x7f163e3f2df4 in cmd_execute lib/command.c:1215
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #9 0x7f163e5a2d73 in vty_command lib/vty.c:544
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #10 0x7f163e5a79c8 in vty_execute lib/vty.c:1307
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #11 0x7f163e5ad299 in vtysh_read lib/vty.c:2216
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #12 0x7f163e593f16 in event_call lib/event.c:1995
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #13 0x7f163e47c839 in frr_run lib/libfrr.c:1185
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #14 0x562bf414e58d in main bgpd/bgp_main.c:505
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #15 0x7f163de66d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444-
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444:Direct leak of 152 byte(s) in 1 object(s) allocated from:
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #0 0x7f163e911037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #1 0x7f163e4b9259 in qcalloc lib/memory.c:105
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #2 0x562bf42ebbd5 in bgp_aggregate_new bgpd/bgp_route.c:7239
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #3 0x562bf42f14e8 in bgp_aggregate_set bgpd/bgp_route.c:8421
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #4 0x562bf42f1cde in aggregate_addressv4_magic bgpd/bgp_route.c:8543
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #5 0x562bf42bd258 in aggregate_addressv4 bgpd/bgp_route_clippy.c:255
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #6 0x7f163e3f1e1b in cmd_execute_command_real lib/command.c:988
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #7 0x7f163e3f219c in cmd_execute_command lib/command.c:1048
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #8 0x7f163e3f2df4 in cmd_execute lib/command.c:1215
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #9 0x7f163e5a2d73 in vty_command lib/vty.c:544
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #10 0x7f163e5a79c8 in vty_execute lib/vty.c:1307
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #11 0x7f163e5ad299 in vtysh_read lib/vty.c:2216
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #12 0x7f163e593f16 in event_call lib/event.c:1995
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #13 0x7f163e47c839 in frr_run lib/libfrr.c:1185
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #14 0x562bf414e58d in main bgpd/bgp_main.c:505
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444- #15 0x7f163de66d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444-
./bgp_local_asn_dot.test_bgp_local_asn_dot_agg/r3.bgpd.asan.3410444-SUMMARY: AddressSanitizer: 304 byte(s) leaked in 2 allocation(s).
Signed-off-by: Samanvitha B Bhargav <bsamanvitha@vmware.com>
