The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Implement handling of MACs and Neighbors (ARP/ND entries) in zebra:
- MAC and Neighbor database handlers
- Read MACs and Neighbors from the kernel, when needed and create
entries in zebra's MAC and Neighbor databases.
- Handle add/update/delete notifications from the kernel for MACs and
Neighbors and update zebra's database appropriately
- Inform locally learnt MACs and Neighbors to client
- Handle MACIP add/delete from client and install appriporiate entries
into the kernel
- Since Neighbor entries will be installed on an SVI, implement the
needed mappings
NOTE: kernel interface is only implemented for Linux/netlink
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement fundamental handling for VNIs and VTEPs:
- Handle EVPN enable/disable by client (advertise-all-vni)
- Create/update/delete VNIs based on VxLAN interface events and inform
client
- Handle VTEP add/delete from client and install into kernel
- New debug command for VxLAN/EVPN
- kernel interface (Linux/netlink only)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
pim controls the vrf table creation for due to the way that
pim must interact with the kernel. In order to match the
table_id for unicast <-> multicast( not necessary but a
real nice to have ) we need to pass up from zebra the
table_id associated with the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to the fix, labels weren't getting installed in zebra nor were the
ifindex values correctly set if labeled-unicast was used in conjunction
with bgp unnumbered.
Ticket: CM-16531
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6276
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To avoid blocking zebra when it's acting as a proxy for an external
label manager.
Besides:
Fix get chunk reconnection. Socket was still being destroyed on failure,
so next attempt would never work.
Filter out unwanted messages in lm sync sock.
Until LDE client sends ZEBRA_LABEL_MANAGER_CONNECT message, zserv
doesn't know which kind of client it is, so it might enqueue unwanted
messages like interface add, interface up, etc. Changes in this commit
discard those messages in the client side in case they arrive before the
expected response.
Change function name for zclient_connect in label manager to avoid
confusion with zclient one.
Signed-off-by: ßingen <bingen@voltanet.io>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Be a bit more rigoruous about what we can receive
from another protocol and attempt to make the code
less likely to crash and to just safely bail
out when an error is received.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
flags is set but never used. Since we
plan to use it in the future, make
it evident what is going on here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement BGP Prefix-SID IETF draft to be able to signal a labeled-unicast
prefix with a label index (segment ID). This makes it easier to deploy
global MPLS labels with BGP, even without other aspects of Segment Routing
implemented.
This patch implements the handling of the BGP-Prefix-SID Label Index
attribute. When received from a peer and the index is acceptable, the local
label is picked up from the SRGB and is programmed as the incoming label as
well as advertised to peers. If the index is not acceptable, no local label
is assigned. The outgoing label will always be the one advertised by the
downstream neighbor.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Support install of labeled-unicast routes by a client. This would be
BGP, in order to install routes corresponding to AFI/SAFI 1/4 (IPv4)
or 2/4 (IPv6). Convert labeled-unicast routes into label forwarding
entries (i.e., transit LSPs) when there is a static label binding.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement interface that allows a client to register a FEC for obtaining
a label binding (in-label). Update client whenever the label binding is
updated and cleanup when client goes away.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This is a prepatory commit for future improvements.
Add a change to the zapi to pass the interface speed up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Label Manager allows to share MPLS label space among different
daemons. Each daemon can request a chunk of consecutive labels and
release it if it doesn't need them anymore. Label Manager stores the
daemon protocol and instance to identify the owner client. It uses them
to perform garbage collection, releasing all label chunks from a client
when it gets disconnected or reconnected.
Additionally, every client can request that the chunk is never garbage
collected. In that case client has the responsibility to release
non-used labels.
Zebra can host the label manager itself (if no -l param is provided) or
connect to an external one using zserv/zclient (providing its address
with -l param).
Client code is in lib/zclient.c, but currently only LDP is using it.
TODO: Allow for custom ranges requests, i.e., specify the start label
besides the chunk.
TODO: Release labels from LDP.
Signed-off-by: Bingen Eguzkitza <bingen@voltanet.io>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Check and read the IPv6 source prefix on ZAPI messages, and pass it down
to the RIB functions (which do nothing with it yet.) Since the RIB
functions now all have a new extra argument, this also updates the
kernel route read functions to supply NULL.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
NEXTHOP_TYPE_IPV4 has the ifindex of the route. Pass it
along so the other side can use it if it is needed.
This will make pim much happier in that we will need to do less
recursive lookups.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There's no need to duplicate the 'vrf_id' and 'name' fields from the 'vrf'
structure into the 'zebra_vrf' structure. Instead of that, add a back
pointer in 'zebra_vrf' that should point to the associated 'vrf' structure.
Additionally, modify the vrf callbacks to pass the whole vrf structure
as a parameter. This allow us to make further simplifications in the code.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since VRFs can be searched by vrf_id or name, make this explicit in the
helper functions.
s/vrf_lookup/vrf_lookup_by_id/
s/zebra_vrf_lookup/zebra_vrf_lookup_by_id/
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
As a general rule of thumb, we should write functions that do one thing
and that do it well. All callers of zsend_redistribute_route() are already
checking if the route should be redistributed or not (as the comment
says), so we definitely shouldn't bother with that in this function.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This feature adds an L3 & L2 VPN application that makes use of the VPN
and Encap SAFIs. This code is currently used to support IETF NVO3 style
operation. In NVO3 terminology it provides the Network Virtualization
Authority (NVA) and the ability to import/export IP prefixes and MAC
addresses from Network Virtualization Edges (NVEs). The code supports
per-NVE tables.
The NVE-NVA protocol used to communicate routing and Ethernet / Layer 2
(L2) forwarding information between NVAs and NVEs is referred to as the
Remote Forwarder Protocol (RFP). OpenFlow is an example RFP. For
general background on NVO3 and RFP concepts see [1]. For information on
Openflow see [2].
RFPs are integrated with BGP via the RF API contained in the new "rfapi"
BGP sub-directory. Currently, only a simple example RFP is included in
Quagga. Developers may use this example as a starting point to integrate
Quagga with an RFP of their choosing, e.g., OpenFlow. The RFAPI code
also supports the ability import/export of routing information between
VNC and customer edge routers (CEs) operating within a virtual
network. Import/export may take place between BGP views or to the
default zebera VRF.
BGP, with IP VPNs and Tunnel Encapsulation, is used to distribute VPN
information between NVAs. BGP based IP VPN support is defined in
RFC4364, BGP/MPLS IP Virtual Private Networks (VPNs), and RFC4659,
BGP-MPLS IP Virtual Private Network (VPN) Extension for IPv6 VPN . Use
of both the Encapsulation Subsequent Address Family Identifier (SAFI)
and the Tunnel Encapsulation Attribute, RFC5512, The BGP Encapsulation
Subsequent Address Family Identifier (SAFI) and the BGP Tunnel
Encapsulation Attribute, are supported. MAC address distribution does
not follow any standard BGB encoding, although it was inspired by the
early IETF EVPN concepts.
The feature is conditionally compiled and disabled by default.
Use the --enable-bgp-vnc configure option to enable.
The majority of this code was authored by G. Paul Ziemba
<paulz@labn.net>.
[1] http://tools.ietf.org/html/draft-ietf-nvo3-nve-nva-cp-req
[2] https://www.opennetworking.org/sdn-resources/technical-library
Now includes changes needed to merge with cmaster-next.
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
BABEL was removed, ifname nexthops were removed, additional includes
were needed, and lastly the protobuf enum-handling triggers a warning.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
FPM aims to provide cross platform mechanism to support the scenario
where the router has forwarding path distinct fromt the kernel.Commonly
Hardware based fast path.Hence it is non-configurable paramter.This
limits us to use funcationality to update FIB information to remote
hosts, like SDN controller.
This implementation provides the CLI to configure remote hosts and port
information of remote fpm controller.Otherwise default fpm server will
be localhost and default fpm port will be well know port 2620.
* zebra_fpm.c: added fpm_server paramter to zfpm_global_t handler.
Implemented CLI for configuring the fpm server and no fpm
command to revert back to default configuration.
* zserv.c: Install zebra node to write fpm configuration info
on console/config file.
Further documentation supplied:
-------------------------------
ZEBRA : CLI CONFIGURATION FOR FPM MODULE
========================================================
1. INTRODUCTION
================================
1.1 scope
This memo discusses the configuration option for zebra to update
FIB information to local and remote modules.
This will also helps to address the issue associated with CORD project.
https://jira.onosproject.org/browse/CORD-411
2. REFERENCE
================================
Quagga version 99.24+ ( main branch committed on 29-sep-2015)
3. PROBLEM DESCRIPTION
================================
Once FPM is enabled, Quagga periodically tries to initiate fpm
connection to localhost:2620. These values are non configurable in
existing implementation. There is no CLI available to configure
"host:port". hence limits us to use it for hardware based fast path
modules only.
4. PROPOSED CHANGES
================================
Following changes are done to the quagga code
a) Added new CLI to configure "host address : port".
The CLI format
<conf t>
$ fpm connection ip <ipv4 address> port <tcp port num>
and no fpm command to revert back to default
<conf t>
$ no fpm connection ip <ipv4 address> port <tcp port num>
b) Allowed values are ipv4 address and tcp port range <1-65535>
c) FPM initialization code has been enhanced to pick the "host
address : port" values from zebra.conf. if not found then
default values as localhost:2620 will be used. and updated the
information on to config file on write config command
5. FILES MODIFIED
================================
1) fpm/fpm.h :
a) Added MACRO to represent network order loopback ip
2) zebra/zebra_fpm.h :
a) introduced fpm_server variable in zfpm_glob_t handler to hold
the remote fpm server address
b) Hooked 'fpm_remote_ip_cmd' and 'no_fpm_remote_ip_cmd' at CONFIG
node to configure remote fpm detail and to revert back to
default respectively
3) zebra/zserv.c :
a) Hooked 'config_write_fpm' callback function, at ZEBRA_NODE to
display the fpm connection details on console on entering
command
$ show running_config
and to write to configuration file on entering command
$ write config
6. TESTING DETAILS
================================
6.1. default behavior
In default configuration FPM will attempt to connect to
localhost:2620
6.2. update fpm info
a) Using CLI command user can configure fpm host:port details
and can be able to write to config file(zebra.conf) using
write config command. this parameters has no
dependency/impact on other parameters of config file
b) show running-config/write config will display the fpm
information if configured. and will not display any
information related to fpm for default configuration
c) these configured information will be stored to config file.
only on write config command.
6.3 loading from config file
a) zebra attempts to connect to fpm server if fpm parameter
found in config file.else connects to default parameters.
b) if fpm connection drops, fpm will periodically attempts to
connect to remote server.
c) if fpm connections already established. then newly
configured fpm parameters will not disconnect the existing
connection. new connection to the different fpm server will
happen only after existing connection closes by either of
the end.
fix fpm prototype
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Replace all HAVE_MPLS #ifdef's by a run-time check if MPLS is supported
by the kernel or not. This way we don't need to create multiple packages
for each OS distribution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Most routing daemons are not interested in certain pieces of information
when a redistributed route is being removed, like its metric and distance.
ldpd, in the other hand, needs to know the distance of the removed routes
in order to work properly. Now, instead of adding another exception in
zserv's code for ldpd, let's make zebra always send all information
about each route to its clients, independently if the route is being
added or removed. This is ok because all daemons are already prepared
to process these additional fields when the appropriate flags are set
in the zebra messages.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When sending the received route in to be added to the rib,
actually use the correct Address family.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Zebra api that was never used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 33361d3992c8bff66247b76e5adaf4b0de8217df)
ZEBRA_IPV4_NEXTHOP_LOOKUP and ZEBRA_IPV6_NEXTHOP_LOOKUP
were never used by any protocol. Remove dead code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 22cd6214bf44863bfb5a34b40ab4abba3c5c4574)
