zebra_find_client needs to match on instance as well so
protocols like ospfd will work correctly for notification.
Modify the zebra_find_client code to accept the instance
number and to pass it in appropriately.
Signed-off-by: Doanld Sharp <sharpd@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide ZAPI code that can pass to an upper level protocol
what happened to it's route on install.
There are these notifications:
1) ZAPI_ROUTE_FAIL_INSTALL - The route attempted to be
installed did not work.
2) ZAPI_ROUTE_BETTER_ADMIN_WON - A route that was installed
has become un-installed due to another routing protocol
installing a better admin distance
3) ZAPI_ROUTE_INSTALLED - The route specified has been installed
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The flags value is not used for unregister events. Let's purposefully
not send anything and purposefully not accept non 0 for it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1) Write zserv api commands( one of each type ) to the side. This will allow
us to use them as input for a fuzzer.
2) Add -c <file to pass to zapi read process> into zebra as a run-time
option of we've turned on fuzzing.
While in and of itself these are not terribly useful( you still need
an external fuzzer ), they provide an infrastructure to allow
tools like afl to test the zapi.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Store the number of packets we should process at
one time in `struct zebra_t`. A future commit
will allow the user to control this via
a hidden cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra_client_read functionality was reading 1 message
from a peer at a time. Modify the code so that we can
read up to 10 at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zserv command handlers make an already long function
even longer. Isolate this code so that we can rearrange
the zebra_client_read function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This was causing some weird prefixes to pop up in my log files. One
alternate solution would be to call apply_mask() on the prefix, but
memcpy() is faster and just enough in this case.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is a continuation of 915902cb82. Basically the netlink
read of messages up from the kernel is now noticing the proper
owner of the route. As such when rib_delete was being called
as part of the upcall from the kernel we were not noticing that
we were the originator and not diss-allowing the rib_delete
from happening. This restores this behavior that we were getting
pre-915902cb82cfd
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On shutdown we were deleting the linked list that
kept the zclient connections, but we were not
freeing the data pointed at by the link list.
This modification allows the normal cleanup of the
linked list to cleanup the zclient data structure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes route redistribution for VRFs
blackhole support was horribly broken. cleanup by removing blackhole
stuff from ZEBRA_FLAG_*
introduces support for "prohibit" routes (Linux/netlink only)
also clean up blackhole options on "ip route" vty commands.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
1) Various socket close issues
2) Ensure afi passed is usable
3) Fix some reads beyond buffer and reads after free
4) Ensure some failure modes are handled properly
5) Memory Leak(s) fix
6) There is no 6.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
As noticed in 657cde1, the zapi_ipv[4|6]_route functions are broken in
many ways and that's the reason that many client daemons (e.g. ospfd,
isisd) need to send handcrafted messages to zebra.
The zapi_route() function introduced by Donald solves the problem
by providing a consistent way to send ipv4/ipv6 routes to zebra with
nexthops of any type, in all possible combinations including IPv4 routes
with IPv6 nexthops (for BGP unnumbered routes).
This patch goes a bit further and creates two new address-family
independent ZAPI message types that the client daemons can
use to advertise route information to zebra: ZEBRA_ROUTE_ADD and
ZEBRA_ROUTE_DELETE. The big advantage of having address-family independent
messages is that it allows us to remove a lot of duplicate code in zebra
and in the client daemons.
This patch also introduces the zapi_route_decode() function. It will be
used by zebra to decode route messages sent by the client daemons using
zclient_route_send(), which calls zapi_route_encode().
Later on we'll use this same pair of encode/decode functions to
send/receive redistributed routes from zebra to the client daemons,
taking the idea of removing code duplication to the next level.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Route attributes like tag, distance and metric are irrelevant when we
want to delete a route from a client daemon. The same can be said about
the nexthops of the route. Only the IP prefix and client protocol are
enough to identify the route we want to remove, considering that zebra
maintains at most one route from each client daemon for each prefix. Once
rib_delete() is called, it deletes the selected route with all of its
nexthops.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is the v6 counterpart of commit c963c20.
Fixes a bug where ipv6 routes received from babeld were being ignored.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Raising privileges is only necessary when binding to a TCP/UDP privileged
port (< 1024).
This solves a problem where the zserv.api socket was being created with
root ownership, preventing the client daemons to connect to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When the linux kernel adds/deletes routes, the
metric is important, but our routing protocols
add/delete in a slightly different manner,
so allow kernel metrics to match so that our
rib matches the kernel's fib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Base framework for supporting MPLS pseudowires in FRR.
A consistent zserv interface is provided so that any client daemon
(e.g. ldpd, bgpd) can install/uninstall pseudowires in a standard
way. Static pseudowires can also be implemented by using the same
interface.
When zebra receives a request to install a pseudowire and the installation
in the kernel or hardware fails, a notification is sent back to the
client daemon and a new install attempt is made every 60 seconds (until
it succeeds).
Support for external dataplanes is provided by the use of hooks to
install/uninstall pseudowires.
Signed-off-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Implicit-null labels are never installed in the FIB but we need to keep
track of them because of L2/L3 VPN nexthop resolution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The defines:
ONE_DAY_SECOND
ONE_WEEK_SECOND
ONE_YEAR_SECOND
were being defined all over the system, move the
define to a central location.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Zebra receiving a macip_del message will automatically call
into the set_master function( a pim function ). Add missing
break statement
Ticket: CM-16841
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
