In case of EVPN MH bond, a member port going in
protodown state due to external reason (one case being linkflap),
frr updates the state correctly but upon manually
clearing external reason trigger FRR to reinstate
protodown without any reason code.
Fix is to ensure if the protodown reason was external
and new state is to have protodown 'off' then do no reinstate
protodown.
Ticket: #3947432
Testing:
switch:#ip link show swp1
4: swp1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 9216 qdisc
pfifo_fast master bond1 state DOWN mode DEFAULT group default qlen
1000
link/ether 1c:34:da:2c:aa:68 brd ff:ff:ff:ff:ff:ff protodown on
protodown_reason <linkflap>
switch:#ip link set swp1 protodown off protodown_reason linkflap off
switch:#ip link show swp1
4: swp1: <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> mtu 9216 qdisc
pfifo_fast master bond1 state DOWN mode DEFAULT group default qlen
1000
link/ether 1c:34:da:2c:aa:68 brd ff:ff:ff:ff:ff:ff
Signed-off-by: Chirag Shah <chirag@nvidia.com>
(cherry picked from commit e4d843b438)
The backup_nexthop entry list has been populated by mistake,
and should not. Fix this by reverting the introduced behavior.
Fixes: 237ebf8d45 ("bgpd: rework bgp_zebra_announce() function, separate nexthop handling")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit d4390fc217)
When switching from nexthop to zapi_nexthop, the srte color
is copied. Do the same in reverse.
Fixes: 31f937fb43 ("lib, zebra: Add SR-TE policy infrastructure to zebra")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 49bc1b6c21)
Changelog:
bgpd
Fix route leaking from the default l3vrf
Allow using optional table id for negative `no set table x` command
Apply noop when doing negative commands for gr operations
Drop newline in json output for `show bgp afi safi json detail`
Fix `match peer` when switching between ipv4/ipv6/interface
Fix `no set as-path prepend asnum...`
Fix crash when deleting the srv6 locator
Fix display when using `missing-as-worst`
Fix dynamic peer graceful restart race condition
Fix logging message when receiving a software version capability
Fix show run of network route-distinguisher
Fix srv6 memory leaks spotted by asan
Fix the order of null check and zapi decode
Ignore validating the attribute flags if path-attribute is configured
Inherit `capability software-version` flag from the peer-group
Inherit `enforce-first-as` flag from the peer-group
Move srv6 cleanup functions
Print old/new states of graceful restart fsm
Revert "Fix pointer arithmetic in bgp snmp module"
debian, redhat, snapcraft
Libyang min version is 2.1.128
isisd
Fix heap-after-free with prefix sid
Fix ip/ipv6 reachability tlvs
lib
Check for not being a blackhole route
Fix exit commands
Remove nb/yang memory cleanup when daemonizing
Replace deprecated ares_gethostbyname
Replace deprecated ares_process()
nhrpd
Fix race condition
Fix core dump on shutdown
Clean up shortcut cache entries on termination
ospf6d
Accept cli `no` for point-to-multipoint
Fix defun formatting wrecked by clang
Fix loopback/ptp/ptmp conn. route checks
Force recalculate on interface_up
Prevent heap-buffer-overflow with unknown
Ospfv3 route change comparision fixed for asbr-only change
ospfd
Correct opaque lsa extended parser
Fix the bug where ip_ospf_dead-interval_minimal_hello-multiplier did not reset hello timer
Protect call to get_edge() in ospf_te.c
Solved crash in ri parsing with ospf te
Revert "Fix some dicey pointer arith in snmp module"
pimd
Fix crash unconfiguring rp keepalive timer
Fix dr-priority range
Fix null register before aging out reg-stop
Fix order of operations for evaluating join
Fix crash when mixing ssm/any-source joins
tests
Check if ibgp session can drop invalid aigp attribute
tools
Frr-reload strip interface vrf ctx line
Handle seq num for bgp as-path in frr-reload.py
topotests
Do not check table version
vtysh
Check if bgpd is enabled before installing vtysh commands for rpki
Fix `show route-map` command when calling via `do`
Show `ip ospf network ...` even if it's not the same as the interface type
zebra
Deny the routes if ip protocol cli refers to an undefined rmap
Fix encoded dnssl length
Fix evpn svd based remote nh neigh del
Fix mpls command
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
When a router route already exists in the area border routers table
as an ABR and it solely changes its ABR or ASBR status, the change
was missed and border route is not updated. This fixes the comparison
for the router_bits in the ospf6_path structure.
This fixes issue https://github.com/FRRouting/frr/issues/16053 although
the actual problem is not the computing router (r2) and not the OSPFv3
redistribution (r3).
Signed-off-by: Acee <aceelindem@gmail.com>
(cherry picked from commit 772688d2d3)
When parsing a osf6 grace lsa field and we receive an
unknown tlv type, ospf6d was not incrementing the pointer
to get beyond the tlv. Leaving a situation where ospf6d
would parse the packet incorrectly.
Signed-off-by: Iggy Frankovic <iggy07@gmail.com>
(cherry picked from commit 826f2510e6)
There is no reason to call `igmp_anysource_forward_stop()` inside a call to
`igmp_get_source_by_addr()`; not only it is not expected for a "get" function
to perform such an action, but also the decision to start/stop forwarding is
already handled correctly by pim outside `igmp_get_source_by_addr()`.
That call was left there from the days pim was initially imported into the sources.
The problem/crash was happening because `igmp_find_source_by_addr()` would fail to
find the group/source combo when mixing `(*, G)` and `(S, G)`. When having an existing
flow `(*, G)`, and a new `(S, G)` igmp is received, a new entry is correctly created.
`igmp_anysource_forward_stop(group)` always stops and eventually frees `(*, G)`, even
when the new igmp is `(S, G)`, leaving a bad state. I.e, the new entry for `(S, G)`
causes `(*, G)` to be deleted.
Tested the fix with multiple receivers on the same interface with several ssm and
any source senders and receivers with various combination of start/stop orders and
they all worked correctly.
Fixes: #15630
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
(cherry picked from commit a951960a15)
Test functions were duplicated by mistakes. They were identical.
Fixes: 8af61c8a34 ("topotests: test leak from the default vrf")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Contains 2 testcases. The first does a basic configuration/connectivity.
The second testcase initiates a shortcut through the primary NHS,
verifies shortcut routes are installed. Primary NHS interface brought
down and verify that the shortcut is not impacted. Finally verify that
after the shortcut expires, it is able to be re-established via a backup
NHS.
Signed-off-by: dleroy <dleroy@labn.net>
(cherry picked from commit a7037ab234)
When nhrpd is shutdown via nhrp_request_stop() the shutdown
sequence was not handling the case where there are active
shortcut routes installed. The zebra client and shortcut rib
were being cleaned up before vrf_terminate() had an opportunity
to delete the active routes.
Signed-off-by: dleroy <dleroy@labn.net>
(cherry picked from commit a4ee976273)
During fuzzing, Iggy Frankovic discovered that get_edge() function in ospf_te.c
could return null pointer, in particular when the link_id or advertised router
IP addresses are fuzzed. As the null pointer returned by get_edge() function is
not handlei by calling functions, this could cause ospfd crash.
This patch introduces new verification of returned pointer by get_edge()
function and stop the processing in case of null pointer. In addition, link ID
and advertiser router ID are validated before calling ls_find_edge_by_key() to
avoid the creation of a new edge with an invalid key.
CVE-2024-34088
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
(cherry picked from commit 8c177d69e3)
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ext_link() function when
attemping to read Segment Routing Adjacency SID subTLVs. The original code
doesn't check if the size of the Extended Link TLVs and subTLVs have the correct
length. In presence of erronous LSA, this will cause a buffer overflow and ospfd
crashes.
This patch introduces new verification of the subTLVs size for Extended Link
TLVs and subTLVs. Similar check has been also introduced for the Extended
Prefix TLV.
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
(cherry picked from commit 5557a289ac)
Iggy Frankovic discovered another ospfd crash when performing fuzzing of OSPF
LSA packets. The crash occurs in ospf_te_parse_ri() function when attemping to
read Segment Routing subTLVs. The original code doesn't check if the size of
the SR subTLVs have the correct length. In presence of erronous LSA, this will
cause a buffer overflow and ospfd crash.
This patch introduces new verification of the subTLVs size for Router
Information TLV.
Co-authored-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
(cherry picked from commit f69d1313b1)
Leaked route from the l3VRF are installed with the loopback as the
nexthop interface instead of the real interface.
> B>* 10.0.0.0/30 [20/0] is directly connected, lo (vrf default), weight 1, 00:21:01
Routing of packet from a L3VRF to the default L3VRF destined to a leak
prefix fails because of the default routing rules on Linux.
> 0: from all lookup local
> 1000: from all lookup [l3mdev-table]
> 32766: from all lookup main
> 32767: from all lookup default
When the packet is received in the loopback interface, the local rules
are checked without match, then the l3mdev-table says to route to the
loopback. A routing loop occurs (TTL is decreasing).
> 12:26:27.928748 ens37 In IP (tos 0x0, ttl 64, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
> 12:26:27.928784 red Out IP (tos 0x0, ttl 63, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
> 12:26:27.928797 ens38 Out IP (tos 0x0, ttl 63, id 26402, offset 0, flags [DF], proto ICMP (1), length 84)
> 10.0.0.2 > 10.0.1.2: ICMP echo request, id 47463, seq 1, length 64
Do not set the lo interface as a nexthop interface. Keep the real
interface where possible.
Fixes: db7cf73a33 ("bgpd: fix interface on leaks from redistribute connected")
Fixes: 067fbab4e4 ("bgpd: fix interface on leaks from network statement")
Fixes: 8a02d9fe1e ("bgpd: Set nh ifindex to VRF's interface, not the real")
Fixes: https://github.com/FRRouting/frr/issues/15909
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 31fc89b230)
> ==2334217==ERROR: AddressSanitizer: heap-use-after-free on address 0x61000001d0a0 at pc 0x563828c8de6f bp 0x7fffbdaee560 sp 0x7fffbdaee558
> READ of size 1 at 0x61000001d0a0 thread T0
> #0 0x563828c8de6e in prefix_sid_cmp isisd/isis_spf.c:187
> #1 0x7f84b8204f71 in hash_get lib/hash.c:142
> #2 0x7f84b82055ec in hash_lookup lib/hash.c:184
> #3 0x563828c8e185 in isis_spf_prefix_sid_lookup isisd/isis_spf.c:209
> #4 0x563828c90642 in isis_spf_add2tent isisd/isis_spf.c:598
> #5 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #6 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #7 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #8 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #9 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #10 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #11 0x7f84b835c72d in event_call lib/event.c:2011
> #12 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #13 0x563828c21918 in main isisd/isis_main.c:346
> #14 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
> #15 0x563828c20df9 in _start (/usr/lib/frr/isisd+0xf5df9)
>
> 0x61000001d0a0 is located 96 bytes inside of 184-byte region [0x61000001d040,0x61000001d0f8)
> freed by thread T0 here:
> #0 0x7f84b88a9b6f in __interceptor_free ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:123
> #1 0x7f84b8263bae in qfree lib/memory.c:130
> #2 0x563828c8e433 in isis_vertex_del isisd/isis_spf.c:249
> #3 0x563828c91c95 in process_N isisd/isis_spf.c:811
> #4 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #5 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #6 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #7 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #8 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #9 0x7f84b835c72d in event_call lib/event.c:2011
> #10 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #11 0x563828c21918 in main isisd/isis_main.c:346
> #12 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> previously allocated by thread T0 here:
> #0 0x7f84b88aa037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
> #1 0x7f84b8263a6c in qcalloc lib/memory.c:105
> #2 0x563828c8e262 in isis_vertex_new isisd/isis_spf.c:225
> #3 0x563828c904db in isis_spf_add2tent isisd/isis_spf.c:588
> #4 0x563828c91cd0 in process_N isisd/isis_spf.c:824
> #5 0x563828c93852 in isis_spf_process_lsp isisd/isis_spf.c:1041
> #6 0x563828c98dde in isis_spf_loop isisd/isis_spf.c:1821
> #7 0x563828c998de in isis_run_spf isisd/isis_spf.c:1983
> #8 0x563828c99c7b in isis_run_spf_with_protection isisd/isis_spf.c:2009
> #9 0x563828c9a60d in isis_run_spf_cb isisd/isis_spf.c:2090
> #10 0x7f84b835c72d in event_call lib/event.c:2011
> #11 0x7f84b8236d93 in frr_run lib/libfrr.c:1217
> #12 0x563828c21918 in main isisd/isis_main.c:346
> #13 0x7f84b7e4fd09 in __libc_start_main ../csu/libc-start.c:308
>
> SUMMARY: AddressSanitizer: heap-use-after-free isisd/isis_spf.c:187 in prefix_sid_cmp
> Shadow bytes around the buggy address:
> 0x0c207fffb9c0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffb9e0: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffb9f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba00: fa fa fa fa fa fa fa fa fd fd fd fd fd fd fd fd
> =>0x0c207fffba10: fd fd fd fd[fd]fd fd fd fd fd fd fd fd fd fd fa
> 0x0c207fffba20: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba40: fa fa fa fa fa fa fa fa 00 00 00 00 00 00 00 00
> 0x0c207fffba50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fa
> 0x0c207fffba60: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa
> Shadow byte legend (one shadow byte represents 8 application bytes):
> Addressable: 00
> Partially addressable: 01 02 03 04 05 06 07
> Heap left redzone: fa
> Freed heap region: fd
> Stack left redzone: f1
> Stack mid redzone: f2
> Stack right redzone: f3
> Stack after return: f5
> Stack use after scope: f8
> Global redzone: f9
> Global init order: f6
> Poisoned by user: f7
> Container overflow: fc
> Array cookie: ac
> Intra object redzone: bb
> ASan internal: fe
> Left alloca redzone: ca
> Right alloca redzone: cb
> Shadow gap: cc
> ==2334217==ABORTING
Fixes: 2f7cc7bcd3 ("isisd: detect Prefix-SID collisions and handle them appropriately")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit e697de5843)
Currently zebra does not deny the routes if `ip protocol <proto> route-map
FOO`
commmand is configured with reference to an undefined route-map (FOO in
this case).
However, on FRR restart, in zebra_route_map_check() routes get denied
if route-map name is available but the route-map is not defined. This
change was introduced in fd303a4ba1.
Fix:
When `ip protocol <proto> route-map FOO` CLI is configured with reference to an
undefined route-map FOO, let the processing in ip_protocol_rm_add() and
ip_protocol_rm_del() go through so that zebra can deny the routes instead
of simply returning. This will result in consistent behavior.
Testing Done:
Before fix:
```
spine-1# configure
spine-1(config)# ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus# vtysh -c "show run" | grep rmap7
ip protocol bgp route-map rmap7
root@spine-1:mgmt:/var/home/cumulus#
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 02:27:45
B>* 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1, weight 1, 02:27:35
B>* 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2, weight 1, 02:27:40
B>* 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3, weight 1, 02:27:40
B>* 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4, weight 1, 02:27:40
```
After fix:
```
spine-1(config)# ip protocol bgp route-map route-map67
spine-1(config)# do show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, A - Babel, D - SHARP, F - PBR, f - OpenFabric,
Z - FRR,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
t - trapped, o - offload failure
C>* 27.0.0.1/32 is directly connected, lo, 00:35:03
B 27.0.0.3/32 [20/0] via fe80::202:ff:fe00:21, downlink_1 inactive, weight 1, 00:34:58
B 27.0.0.4/32 [20/0] via fe80::202:ff:fe00:29, downlink_2 inactive, weight 1, 00:34:57
B 27.0.0.5/32 [20/0] via fe80::202:ff:fe00:31, downlink_3 inactive, weight 1, 00:34:57
B 27.0.0.6/32 [20/0] via fe80::202:ff:fe00:39, downlink_4 inactive, weight 1, 00:34:58
spine-1(config)#
root@spine-1:mgmt:/var/home/cumulus# ip route show
root@spine-1:mgmt:/var/home/cumulus#
```
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
(cherry picked from commit 705e8ef78f)
Without this patch we MUST follow this sequence:
```
no match peer 10.0.0.1
match peer 2a01::1
```
Otherwise, both IPv4/IPv6 values are set/compiled, thus when printing the
configuration in show running, we see the first one (IPv4).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit edfc03614f)
Configured with "mpls label bind 1.1.1.1/32 explicit-null", the running
configuration is:
```
!
mpls label bind 1.1.1.1/32 IPv4 Explicit Null
!
```
After this commit, the running configuration is:
```
!
mpls label bind 1.1.1.1/32 explicit-null
!
```
And add the support for the "no" form:
```
anlan(config)# mpls label bind 1.1.1.1/32 explicit-null
anlan(config)# no mpls label bind 1.1.1.1/32 explicit-null
```
Signed-off-by: anlan_cs <anlan_cs@tom.com>
(cherry picked from commit 05ad3ccb03)
We're not calling any other termination functions to free allocated
memory when daemonizing except these two. There's no reason for such an
exception, and because of these calls we have the following libyang
warnings every time FRR is started:
```
MGMTD: libyang: String "15" not freed from the dictionary, refcount 2
MGMTD: libyang: String "200" not freed from the dictionary, refcount 2
MGMTD: libyang: String "mrib-then-urib" not freed from the dictionary, refcount 2
MGMTD: libyang: String "1000" not freed from the dictionary, refcount 2
MGMTD: libyang: String "10" not freed from the dictionary, refcount 2
MGMTD: libyang: String "5" not freed from the dictionary, refcount 2
```
Remove these calls to get rid of the unnecessary warnings.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit a564710c34)
bgp_llgr topotest sometimes fails at step 8:
> topo: STEP 8: 'Check if we can see 172.16.1.2/32 after R4 (dynamic peer) was killed'
R4 neighbor is deleted on R2 because it fails to re-connect:
> 14:33:40.128048 BGP: [HKWM3-ZC5QP] 192.168.3.1 fd -1 went from Established to Clearing
> 14:33:40.128154 BGP: [MJ1TJ-HEE3V] 192.168.3.1(r4) graceful restart timer expired
> 14:33:40.128158 BGP: [ZTA2J-YRKGY] 192.168.3.1(r4) graceful restart stalepath timer stopped
> 14:33:40.128162 BGP: [H917J-25EWN] 192.168.3.1(r4) Long-lived stale timer (IPv4 Unicast) started for 20 sec
> 14:33:40.128168 BGP: [H5X66-NXP9S] 192.168.3.1(r4) Long-lived set stale community (LLGR_STALE) for: 172.16.1.2/32
> 14:33:40.128220 BGP: [H5X66-NXP9S] 192.168.3.1(r4) Long-lived set stale community (LLGR_STALE) for: 192.168.3.0/24
> [...]
> 14:33:41.138869 BGP: [RGGAC-RJ6WG] 192.168.3.1 [Event] Connect failed 111(Connection refused)
> 14:33:41.138906 BGP: [ZWCSR-M7FG9] 192.168.3.1 [FSM] TCP_connection_open_failed (Connect->Active), fd 23
> 14:33:41.138912 BGP: [JA9RP-HSD1K] 192.168.3.1 (dynamic neighbor) deleted (bgp_connect_fail)
> 14:33:41.139126 BGP: [P98A2-2RDFE] 192.168.3.1(r4) graceful restart stalepath timer stopped
af8496af08 ("bgpd: Do not delete BGP dynamic peers if graceful restart
kicks in") forgot to modify bgp_connect_fail()
Do not delete the peer in bgp_connect_fail() if Non-Stop-Forwarding is
in progress.
Fixes: af8496af08 ("bgpd: Do not delete BGP dynamic peers if graceful restart kicks in")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit e446308d76)
Don't allocate subtlvs container if there's nothing to add to it. If the
container is allocated, the "sub-TLVs presence" bit is set in the TLVs
even if there's no actual sub-TLVs, what violates the RFC.
Fixes#14514.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
(cherry picked from commit c3d34b84f3)
join_desired looks at whether up->channel_oil is empty. up->channel_oil
is updated from pim_forward_stop(), calling pim_channel_del_oif(). But
that was being called *after* updating join_desired, so join_desired saw
a non-empty OIL. Pull up the pim_forward_stop() call to before updating
join_desired.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit fdb1a6fed5)
It looks like the code was trying to do this with the null_register
parameter on pim_upstream_start_register_stop_timer(), but that didn't
quite work right. Restructure a bit to get it right.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit dce38da806)
