Description: Currently IPv4 routes with IPv6 link local next hops are
not properly installed in FPM.
Reason is the netlink decoding truncates the ipv6 LL address to 4 byte
ipv4 address.
Ex : fe80:: is directly converted to ipv4 and it results in 254.128.0.0
as next hop for below routes
show ip route
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued, r - rejected, b - backup
B>* 2.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 5.1.0.0/16 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight 1,
02:22:26
B>* 10.1.0.2/32 [200/0] via fe80::268a:7ff:fed0:d40, Ethernet0, weight
1, 02:22:26
Hence this fix converts the ipv6-LL address to ipv4-LL (169.254.0.1)
address before sending it to FPM. This is inline with how these types of
routes are currently programmed into kernel.
Signed-off-by: Nikhil Kelapure <nikhil.kelapure@broadcom.com>
1. Optimized test: test_clear_pim_neighbors_and_mroute_p0 run time by clearing
mroute and verifying mroutes separately. Execution time is reduced from almots 10 mins
to ~220 sec.
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Current implementation doesn't copy nexthop_srv6. This causes unexpected
behavior when receiving SID information and nexthop isn't onlink.t
Signed-off-by: Ryoga Saito <contact@proelbtn.com>
EVPN paths are maintained in per-ES list for efficient updates
(es→macip_global_path_list, es→macip_evi_path_list). VNI is also maintained
in path_extra for easy lookups. This (path_extra) VNI (which is always 0 for
global paths) was being displayed against the path and was mis-interpreted
as the BD.
To avoid that confusion I have removed the display.
Ticket: #2732605
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
route_scale run is 500+ seconds. Break it up into
2 separate tests. This should reduce run time a slight
bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Just use time_t, instead of downgrading time_t to a 32 bit value.
We should be using time_t instead of 32 bit unsigned values.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Compiler is warning that node_src_id may be used uninited
we know this is not possible but the compiler doesn't.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix issue of topotest failures with BGP status Connect or Idle
instead of the expected Active
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Currently the source IP parameter must be entered between destination IP
and destination port parameters. This is not obviously understandable
when you read such config so let's move the source parameter to the end
of the command line, after the whole list of destination parameters. We
can do this without any deprecation cycle as the parameter was introduced
just recently and isn't in any public release yet.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When processing a route-map for default-originate, we actually want to
match by attributes in routes from the RIB, but set attributes in the
newly originated route. Currently, it's not the case. Instead, we
construct a dummy path combining attributes from both routes, and we end
up with multiple problems:
- match by as-path doesn't work
- communities from the matched RIB route are copied to the newly
originated route
- we corrupt the RIB routes
To fix the issue, we should use the new route-map API that allows using
separate match/set objects.
Fixes#9584.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Sometimes it's needed to match by fields of one object but set fields of
another object. The following commit is an example.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Modernize the test a bit, generate expected results rather than load from
file, and add a general json_cmp with retry function and use it.
Signed-off-by: Christian Hopps <chopps@labn.net>
- Update the template and documentation to use newer pytest fixutres for
setup and teardown, as well as skipping tests when the suite fails.
Signed-off-by: Christian Hopps <chopps@labn.net>
