The values saved for the route table and eigrp topo
were a bit off because they have been corrected
in the eigrp daemon
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature from pytest can not be used to detect runtime errors.
Also, remove test_router_running() since all tests should actually check
if all daemons are up and running.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Nothing fancy here, just add 3 routers in a row
attempt to let eigrp come up and start a mininet
xterm to debug, since eigrp doesn't work yet.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
json check accidently checked for the spfLastDurationMsecs which
isn't always 0 for slower system in our tests. ARM7 sometimes has
a slightly higher value (1).
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Add check for number of routes to convergence. InQ=0, OutQ=0
together with correct number of routes received shows that
BGP has converged
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
Using relative path to start the exabgp python scripts didn't work out
of the box in my enviroment, so be more specific since we already know
where the scripts are.
Add more tests to the ospf-topo1 to include IPv6 testing. Since both IP
versions are running together, there is no need to wait OSPF convergence
per IP version.
Standardized function that removes format spaces (or tab) and carriage
returns characters. This function is useful to allow output text
processing without breaking diff capabilities.
Output example:
*N IA 2001:db8:2::/64 :: r2-eth0 00:03:39
Becomes:
*N IA 2001:db8:2::/64 :: r2-eth0 00:03:39
If you remove 'IA' you won't have space formatting problem anymore.
Having a generic start/stop methods for TopoGear allows TopoGen to call
start/stop for all equipments. This allows us to reduce the teardown
code by removing the necessity of having to always remember to call
each equipment clean up function.
Auto configure daemon logging files to the appropriated place. This
removes the responsibility from the test developer to set this in the
daemon configuration.
TopoRouters now create a logger (which logs to /tmp/{router_name}.log)
on start to record all commands and events that it goes through. All log
messages contain timestamps that may be used in the future to:
(1) correlate commands call with events
(2) benchmark/time command speed
Allow topotest subsystems to create their own loggers. This will help
increase log organization and allow different settings to fit the
subsystems needs.
The default logger (root) is already being used by Mininet, so to allow
customizing logging output and configuring log files Topolog was
created. Topolog is no more than a thin layer abstraction to call
logging functions without using the 'root' logger.
Use a configuration file for casual settings like:
* Verbosity level (helps when debugging mininet issues)
* Custom daemon directory (in order to support running different daemon
binaries without touching tests)
* Daemon type switch: allow running quagga without touching any test
files
Also fix the add_router() documentation to include all options.
Create a specialized assert and json_cmp() result to improve the
comparison output. With this we also got a way to display all comparison
failures instead of just the first one.
This allows old tests to be run with '--topology-only' without
generating tons of error messages, instead it will just stop the test
without trying anything else.
Allow vtysh_cmd() to convert JSON output to Python data structures.
This feature will be used to get vtysh JSON outputs for tests
comparsions.
Usage example:
```py
router = get_topogen().gears['r1']
json_output = router.vtysh_cmd('show ip ospf json', isjson=True)
json_cmp(json_output, {'important_key': 'important_value'})
```
Implemented a JSON compare function that tells you when a specific
subset of items exist or not inside a JSON dataset.
More details can be found in the function docstring or in the test file
lib/test_json.py.
After some feedback from mwinter@, the names of equipments are now
shorter to make it easier to type them and to keep consistency with
mininet documentation. While here, update the template and make it use
optional name parameters for clarity.
Adding the __init__.py file makes python and its linter recognize that
the test makes part of the package, this makes us save a few lines of
code to make the linter and auto complete engines happy.
This commit changes how topology links are made in order to support
discovering who and what link is the node interface connected to. After
that, the implementation of the link state change functions were trivial
as calling a command in the node shell.
The method run() was moved from TopoRouter to TopoGear so all equipment
types can benefit from this code.
Topogen (Topology Generator) is a helper that wraps around Topotest to
simplify some of the boilerplate code. This abstraction will help the
development of new tests and new APIs without breaking the existing
ones. It also makes the relation of objects clearer, since we no longer
touch the Mininet API directly, which in turn also makes us less
vulnerable to external API changes.
Implemented two functions to help setting sysctl values:
* set_sysctl: set a sysctl and return an auditable return value
* assert_sysctl: uses the previous function to assert that the sysctl
was set
Now zebra is adding the ldpd implicit-null labels to the RIB as well. We
don't want to hide them in the "show ip route" commands because knowing
that a route is associated with an implicit-null label is an useful
piece of information, specially when troubleshooting L2/L3 VPNs.
Note: preserve the original output for cli version 1 (stable/2.0).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fixes the issue for topotest to fail ot end of skipped LDP test on
a system without MPLS support
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
If daemon crashed at a later stage (not startup), then the test scripts didn't properly detect it and report unpredictable errors. This will properly log the daemon crashes
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
When we have a kernel sub version > 10 the float conversion
of the kernel version causes 4.10 to be less than 4.5
Get the kernel version in groups on <major>.<minor> and do
comparison that way
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Added test to check for version
* Adopted all tests to verify against the correct version of output
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
The northbound infrastructure for operational data was subpar compared
to the infrastructure for configuration data. This commit addresses most
of the existing problems, making it possible to write operational-data
callbacks for more complex YANG models.
Summary of the changes:
* Add support for nested YANG lists.
* Add support for leaf-lists.
* Add support for leafs of type "empty".
* Introduce the "show yang operational-data XPATH" command, and write an
unit test for it. The main purpose of this command is to make it
easier to test the operational-data northbound callbacks.
* Introduce the nb_oper_data_iterate() function, that can be used
to iterate over operational data. Make the CLI and sysrepo use this
function.
* Since ConfD has a very peculiar API, it can't reuse the
nb_oper_data_iterate() like the other northbound clients. In this
case, adapt the existing ConfD callbacks to support the new features
(and make some performance improvements in the process).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The motivation for this patch is to address a concerning behavior of
tx-addpath-bestpath-per-AS. Prior to this patch, all paths' TX ID was
pre-determined as the path was received from a peer. However, this meant
that any time the path selected as best from an AS changed, bgpd had no
choice but to withdraw the previous best path, and advertise the new
best-path under a new TX ID. This could cause significant network
disruption, especially for the subset of prefixes coming from only one
AS that were also communicated over a bestpath-per-AS session.
The patch's general approach is best illustrated by
txaddpath_update_ids. After a bestpath run (required for best-per-AS to
know what will and will not be sent as addpaths) ID numbers will be
stripped from paths that no longer need to be sent, and held in a pool.
Then, paths that will be sent as addpaths and do not already have ID
numbers will allocate new ID numbers, pulling first from that pool.
Finally, anything left in the pool will be returned to the allocator.
In order for this to work, ID numbers had to be split by strategy. The
tx-addpath-All strategy would keep every ID number "in use" constantly,
preventing IDs from being transferred to different paths. Rather than
create two variables for ID, this patch create a more generic array that
will easily enable more addpath strategies to be implemented. The
previously described ID manipulations will happen per addpath strategy,
and will only be run for strategies that are enabled on at least one
peer.
Finally, the ID numbers are allocated from an allocator that tracks per
AFI/SAFI/Addpath Strategy which IDs are in use. Though it would be very
improbable, there was the possibility with the free-running counter
approach for rollover to cause two paths on the same prefix to get
assigned the same TX ID. As remote as the possibility is, we prefer to
not leave it to chance.
This ID re-use method is not perfect. In some cases you could still get
withdraw-then-add behaviors where not strictly necessary. In the case of
bestpath-per-AS this requires one AS to advertise a prefix for the first
time, then a second AS withdraws that prefix, all within the space of an
already pending MRAI timer. In those situations a withdraw-then-add is
more forgivable, and fixing it would probably require a much more
significant effort, as IDs would need to be moved to ADVs instead of
paths.
Signed-off-by Mitchell Skiba <mskiba@amazon.com>
This commit introduces lib/id_alloc, which has facilities for both an ID number
allocator, and less efficient ID holding pools. The pools are meant to be a
temporary holding area for ID numbers meant to be re-used, and are implemented
as a linked-list stack.
The allocator itself is much more efficient with memory. Based on sizeof
values on my 64 bit desktop, the allocator requires around 155 KiB per
million IDs tracked.
IDs are ultimately tracked in a bit-map split into many "pages." The
allocator tracks a list of pages that have free bits, and which sections
of each page have free IDs, so there isn't any scanning required to find
a free ID. (The library utility ffs, or "Find First Set," is generally a
single CPU instruction.) At the moment, totally empty pages will not be
freed, so the memory utilization of this allocator will remain at the
high water mark.
The initial intended use case is for BGP's TX Addpath IDs to be pulled
from an allocator that tracks which IDs are in use, rather than a free
running counter. The allocator reserves ID #0 as a sentinel value for
an invalid ID numbers, and BGP will want ID #1 reserved as well. To
support this, the allocator allows for IDs to be explicitly reserved,
though be aware this is only practical to use with low numbered IDs
because the allocator must allocate pages in order.
Signed-off-by Mitchell Skiba <mskiba@amazon.com>
We weren't cleaning up some files (a whole lot of python foobar) and had
some files in the dist tarball that don't quite belong there.
Signed-off-by: David Lamparter <equinox@diac24.net>
libunwind provides an alternate to backtrace() for printing out the call
stack of a particular location. It doesn't use the frame pointer, it
goes by the DWARF debug info. In most cases the traces have exactly the
same information, but there are some situations where libunwind traces
are better.
(On some platforms, the libc backtrace() also uses the DWARF debug info
[e.g.: ARM backtraces are impossible without it] but this is not the
case everywhere, especially not on BSD libexecinfo.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All I can see is an unneccessary complication. If there's some purpose
here it needs to be documented...
Signed-off-by: David Lamparter <equinox@diac24.net>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
config.h (or, transitively, zebra.h) must be the first include file
listed for autoconf things like _GNU_SOURCE and _POSIX_C_SOURCE to work
correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
ASAN/MSAN/TSAN flags need to be in CFLAGS and LDFLAGS; the latter links
the correct compiler-dependent library. Also, the configure switch was
broken (--disable-... would enable the sanitizer.)
Signed-off-by: David Lamparter <equinox@diac24.net>
test_cli.refout is written by configure into the build directory, thus
we need a little special glue to find it correctly.
Signed-off-by: David Lamparter <equinox@diac24.net>
Our "deserialize, reserialize, check-equality" test fails when the
fuzzer produces PDUs with incorrect cryptographic checksums.
While the most realistic solution would be to validate the
cryptographic checksums in the test program, that seems very silly,
given that we don't want to fuzz our cryptographic auth.
Given that, removing auth during fuzzing seems the next best solution.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric requires knowledge of the first two hops on each path
calculated by spf to implement its flooding optimization. Extend the
hopcount-spf to build such a datastructure.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Let the compiler know that this code intentionally fell
through to the next case statement in a switch.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The va_start function cannot take a object that can be type promoted
Looks like a new warning coming in from a new compiler.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of the parameters for lib/srcdest.. have changed to
consts, make the test cases respect that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit ae9c9aba changed isis_vertex_id_init() and isis_find_vertex()
parameters, so compiler reported warnings in the test (the actual data
passing through is the same because of the union used in the latest changes).
This commit fixes the warnings in the test.
Signed-off-by: F. Aragon <paco@voltanet.io>
Align the srcdest table test with recent api changes that use
'const' more strictly. Remove test_bgp_table binary - looks
as if it was committed by mistake.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This commit finalizes the previous commits which introduced a generic
approach for making all BGP peer and address-family attributes
overrideable by keeping track of the configuration origin in separate
internal structures.
First of all, the test suite was greatly extended to also check the
internal data structures of peer/AF attributes, so that inheritance for
internal values like 'peer->weight' is also being checked in all cases.
This revealed some smaller issues in the implementation, which were also
fixed in this commit. The test suite now fully passes and covers all the
usual situations that should normally occur.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit introduces BGP peer-group overrides for the last set of
peer-level attrs which did not offer that feature yet. The following
attributes have been implemented: description, local-as, password and
update-source.
Each attribute, with the exception of description because it does not
offer any inheritance between peer-groups and peers, is now also setting
a peer-flag instead of just modifying the internal data structures. This
made it possible to also re-use the same implementation for attribute
overrides as already done for peer flags, AF flags and AF attrs.
The `no neighbor <neigh> description` command has been slightly changed
to support negation for no parameters, one parameter or * parameters
(LINE...). This was needed for the test suite to pass and is a small
change without any bigger impact on the CLI.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit implements BGP peer-group overrides for the timer flags,
which control the value of the hold, keepalive, advertisement-interval
and connect connect timers. It was kept separated on purpose as the
whole timer implementation is quite complex and merging this commit
together with with the other flag implementations did not seem right.
Basically three new peer flags were introduced, namely
*PEER_FLAG_ROUTEADV*, *PEER_FLAG_TIMER* and *PEER_FLAG_TIMER_CONNECT*.
The overrides work exactly the same way as they did before, but
introducing these flags made a few conditionals simpler as they no
longer had to compare internal data structures against eachother.
Last but not least, the test suite has been adjusted accordingly to test
the newly implemented flag overrides.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit introduces the current test suite for BGP peer-group
overrides by adding support for custom check handlers (which can check
internal data structures more thoroughly) and by fixing several small
mistakes and issues that slipped through. Also some parts of the code
have been cleaned up to avoid duplicate and/or hard-to-read code.
Additionally a first experimental check for a BGP peer attribute with
values (advertisement-interval <value>) has been added to the test
suite. As this test suite is currently not passing, it has not been
added to the python test caller.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of the overrides for peer address-family
attributes suffered a bug, which caused all peer-specific attributes to
be lost when the peer was added to a peer-group which already had that
specific address-family active.
This commit extends the *peer_group2peer_config_copy_af* function to
respect overridden flags properly. Additionally, the arguments of the
macros *PEER_ATTR_INHERIT* and *PEER_STR_ATTR_INHERIT* have been
reordered to be more consistent and easy to read.
This commit also adds further test cases to the BGP peer attributes test
suite, so that this kind of error is being caught in future commits. The
missing AF-attribute *distribute-list* has also been added to the test
suite.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
When trying to run make check using automake 1.16.1, we get:
CC isisd/test_fuzz_isis_tlv-test_fuzz_isis_tlv.o
isisd/test_fuzz_isis_tlv.c:1:10: fatal error: test_fuzz_isis_tlv_tests.h: No such file or directory
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
Makefile:1096: recipe for target 'isisd/test_fuzz_isis_tlv-test_fuzz_isis_tlv.o' failed
make[1]: *** [isisd/test_fuzz_isis_tlv-test_fuzz_isis_tlv.o] Error 1
make[1]: Leaving directory '/src/frr-frr-5.0/tests'
Makefile:1220: recipe for target 'check-am' failed
make: *** [check-am] Error 2
From reading the automake docs, it looks like there may be a more
reliable way to express built files in the Makefile.am using BUILT_SOURCES.
Using this method, we seem to build fine now on 1.16.1 and this
has been tested on Ubuntu 18.04, CentOS 7 and Alpine edge (which uses
automake 1.16.1).
Issue: https://github.com/FRRouting/frr/issues/2403
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
On Alpine Linux edge, musl does not seem to be RFC 5952 4.2.2
compliant (how to print a single :0: in the IPv6 address). Let's
skip that test, as we get false negatives when running against
that version of musl.
Credit for the idea for the fix and how to fix it is due to
chris@opensourcerouting.org.
Testing done:
make check on alpine linux passes now
Issue: https://github.com/FRRouting/frr/issues/2375
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
The bgp data structures:
bgp->vnihash
bgp->vrf_export_rtl
bgp->vrf_import_rtl
bgp->l2vnis
Must always be valid data structures. So remove the tests
that ensure that they are.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit improves the previous implementation of the peer attribute
test suite by getting rid of some really ugly macros and replacing them
with sane functions.
Additionally, the macro TEST_ASSERT was changed to TEST_ASSERT_EQ (==
comparison) which now also prints the line where the assertion has been
infringend. This should make it way more clear where a specific issue
has been spotted.
Last but not least, the multicast families for both IPv4 and IPv6 had
been added as they are working without any further changes or special
cases for all currently existing peer attributes. Other AFI/SAFI
references have been removed to keep the code clean.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit fixes all outstanding style/formatting issues as detected by
'git clang-format' or 'checkpath' for the new peer-group override
implementation, which spanned across several commits.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit introduces unit tests for BGP peer attributes and checks all
three involved components, which are:
- CLI Configuration Input: The appropriate commands to configure the
attribute on either a peer or peer-group are being executed the same way
an end user would do it.
- CLI Configuration Output: The output of 'show running-config' is being
checked for presence/absence of expected configuration strings.
- Internal Data Structures: The internal data structures for maintaining
flag/filter states (value + override + invert) are being checked after
each operation to ensure the override has been implemented properly.
All attributes to be tested must be defined within the 'peer_attrs'
structure, which contains all peer attributes as of today and checks
them with both IPv4 Unicast and IPv6 Unicast. More address families are
supposed to be introduced at a later point in time.
Each attribute is being checked in its own 'clean' BGP environment, so
everything gets reset after each attribute to avoid any weird edge
cases. The 'correct' BGP startup and shutdown routine was taken from
'bgp_main.c' to ensure that we are not leaking any memory or acting
different than the real 'bgpd' would do.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Some recent changes in BGP now require that the
peer's nexthop have a valid ifp when we are looking
at:
case BGP_ATTR_NHLEN_IPV6_GLOBAL_AND_LL:
case BGP_ATTR_NHLEN_VPNV6_GLOBAL_AND_LL:
This assumption makes sense for this type of Nexthop Attribute.
So for the test let's jimmy up a `fake` enough interface pointer
so that the actual test we can focus on what we are actually
testing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Add general-purpose DFS traversal code
* Add ability to dump any graph to DOT language
* Add tests for graph datastructure
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This commit checks that the reception of MP_REACH and MP_UNREACH
flowspec is handled correctly.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were improperly mixing constants used to identify AFI/SAFI values
using the IANA and internal representations. Things happened to be
working because the IANA/internal values are the same in some cases
(e.g. AFI_IP and IANA_AFI_IPV4). This commit fixes a few warnings when
running "make check" on FreeBSD 11.1.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These variables being removed were made obsolete by commit 9cabb64b3. As
of now, the parse_test() function fetches the afi/safi values from
the parsed NLRIs. There's no need to have duplicate information in the
'test_segment' structure anymore.
This fixes several warnings of this kind when running "make check"
on FreeBSD: "implicit conversion from enumeration type 'iana_safi_t'
to different enumeration type 'safi_t'".
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Fix rare failure caused when end pointer is at end of buffer memory
and a call to ringbuf_get() is made that reads all of the data in the
buffer; start pointer was advanced past end pointer, causing some
special handling to be skipped
* Fix ringbuf_peek() moving start pointer
* Fix use after free
* Remove extraneous assignment
* Update relevant tests
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Peek functionality for ring buffers and associated tests.
Also:
* Slight optimization to avoid 0-byte memcpy() by changing > to >=
* Add rv checks for some ringbuf_[put|get] calls that were missing them
in the test
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The $Id: lines would allow code kept in cvs to substitute
the file version upon checkout. Since we are not using
cvs there is no need to keep these lines anymore.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fuzzing hook for BGP packet processing does not map to MT-BGPD. Removing
offending call for now, additional work to fix this in the future.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Changes all synchronization primitives to be dynamically allocated. This
should help catch any subtle errors in pthread lifecycles.
This change also pre-initializes synchronization primitives before
threads begin to run, eliminating a potential race condition that
probably would have caused a segfault on startup on a very fast box.
Also changes mutex and condition variable allocations to use
MTYPE_PTHREAD and updates tests to do the proper initializations.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add write callback.
Add error callback.
Add frrzmq_check_events() function to check for edge triggered things
that may have happened after a zmq_send() call or so.
Update ZMQ tests.
Signed-off-by: ßingen <bingen@voltanet.io>
Fuzzing with tools like afl requires the ability to quickly/easily
call a function to test it's input. In the case of bgp we
need the ability to test bgp's packet handler quickly. This
added program bgpd/test_packet takes a file name as input
that it treats as normal bgp communication between itself
and a peer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
While vertizes should be strictly ordered on insertion, deletion
will of course encouter equality.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
adds a new all-daemon "debug memstats-at-exit" command. Also saves
memstats to a file in /tmp, useful if a long-running daemon is having
weird issues (e.g. in a user install).
Fixes: #437
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A mismatch between the make rule and the include path causes dependency
tracking to try to build the clippy.c file twice (at the same time),
which results in spurious build failures.
Fixes: #971
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
BUILT_SOURCES doesn't do what the name suggests. What it actually means
is "these files should be built first when doing a 'make' without
explicit target" (or "make all").
It's pretty much almost always wrong to use BUILT_SOURCES, the only
correct use is when a file is needed by an unspecified / large set of
files.
Also remove version.h and route_types.h from dist tarball while we're at
it. configure will create them anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This splits off privs_preinit(), which does the lookups for user and
group IDs. This is so the init code can create state directories while
still running as root.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SIGTSTP appropriately suspends the foreground terminal
- SIGINT causes the daemon to exit, regardless of -d
- SIGQUIT causes the daemon to daemonize, regardless of -d
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Without it, tests were passing before commit 9fb47c0, so a case was
missing (the one which that commit fixes).
Signed-off-by: ßingen <bingen@voltanet.io>
Needed these while rewriting LSDB iteration.
NB: this commit fails because of a bug in ospf_lsdb_get_next, which will
SEGV when the LSDB is actually empty. Whooo... (this is fixed in the
following commits.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
pytest.mark.skipif apparently iterates through a class's methods,
applying itself onto the various methods. Now, since we're deriving
from a parent class, the method is actually the same object inherited
from the parent, so the decorator will apply itself on the parent's
testrunning method (test_refout). The result is that any TestRefout
tests after "test_commands.py" will be skipped...
This only became apparent after adding ospf6d/test_lsdb.py; before,
test_commands.py was the last test in the list so it didn't matter...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add support for naming pthreads. Also, note that we don't have any
records yet if that's the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
it's just an alias for a millisecond timer used in exactly nine places
and serves only to complicate
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
A partially-entered IPv6 address would never return a "partly_match",
meaning some possible completions weren't listed by the matcher.
This specifically breaks autocompleting BGP IPv6 neighbor addresses.
Before:
aegaeon# show ip bg ne 2001:<?>
WORD Neighbor on BGP configured interface
After:
aegaeon# show ip bg ne 2001:<?>
WORD Neighbor on BGP configured interface
X:X::X:X Neighbor to display information about
2001:db8::2
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Label Manager allows to share MPLS label space among different
daemons. Each daemon can request a chunk of consecutive labels and
release it if it doesn't need them anymore. Label Manager stores the
daemon protocol and instance to identify the owner client. It uses them
to perform garbage collection, releasing all label chunks from a client
when it gets disconnected or reconnected.
Additionally, every client can request that the chunk is never garbage
collected. In that case client has the responsibility to release
non-used labels.
Zebra can host the label manager itself (if no -l param is provided) or
connect to an external one using zserv/zclient (providing its address
with -l param).
Client code is in lib/zclient.c, but currently only LDP is using it.
TODO: Allow for custom ranges requests, i.e., specify the start label
besides the chunk.
TODO: Release labels from LDP.
Signed-off-by: Bingen Eguzkitza <bingen@voltanet.io>
The protocols enum serves no purpose other than adding potential for
bugs and making it complicated to add a new protocol... nuke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Start centralising startup & option parsing into the library.
FRR_DAEMON_INFO is a bit weird, but it will become useful later (e.g.
for killing the ZLOG_* enum, and having the daemon name available)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This commit is a fix from previous commit: Quagga: AFI/SAFI mappings
IANA to/from internal values. It removes the printf that was used for
troubleshooting the afi/safi change, in respect to testing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Because the bgp_nlri_parse function has been extended with one parameter,
when doing bgp testing against some packets, the correct call to
bgp_nlri_parse must be done.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Test uninstall_element(). The commandline-specified counter allows
isolating memleaks more closely, differentiating one-off vs. repeated
leaks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The library libzebra that is installed with FRR will
conflict with Quagga. So let's rename it to libfrr.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
