In order to iterate over MPLS VPN routes, it's necessary to use
two nested loops (the outer loop iterates over the MPLS VPN RDs,
and the inner loop iterates over the VPN routes from that RD).
The bgp_table_stats_walker() function wasn't giving this special
treatment to the MPLS VPN safi as it should, which was leading to
crashes and malfunctioning. Fix this.
Signed-off-by: Renato Westphal <renatowestphal@gmail.com>
pinum (renamed from rinum) was never used for anything useful since
the initial revision ~17 years ago. Get rid of it.
Signed-off-by: Renato Westphal <renatowestphal@gmail.com>
while labeled_unicast routes should be fetched in the
unicast table, we cannot set the safi to SAFI_UNICAST
else the peer afc checks and subgroup retrieval will fail
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
bgp update can contain router mac address same as one of SVIs
mac address, during processing of evpn route in bpg_update()
check for the flag is set and filter the route from installing.
This check is done prior to attribute lookup or storing in database.
Parse check and set is done once during attribute parse
because all the NLRIs containing evpn prefix
(type-2/type-5) will have same exntended community applicable.
Ticket:CM-23674
Reviewed By:CCR-8336
Testing Done:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The code that causes the bottleneck has been written generically to
handle the below two cases:
a) When a new aggregate-address is configured.
b) When new routes, that can be aggregated under an existing
aggregate-address, are received.
This change optimizes the code that handles case-(b).
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
With this commit:
1) 'struct bgp_aggregate' is moved to bgp_route.h from bgp_route.c
2) Hashes to accommodate the as-path, communities, extended-communities and
large-communities attributes of all the routes aggregated by an
aggregate route is introduced in 'struct bgp_aggregate'.
3) Place-holders for the aggregate route's as-path, communities,
extended-communities and large-communities attributes are introduced in
'struct bgp_aggregate'.
4) The code to manage the as-path of the routes that are aggregatable under
a configured aggregate-address is introduced.
5) The code to compute the aggregate-route's as-path is introduced.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Refine check on whether a route can be injected into EVPN to allow
EVPN-sourced routes to be injected back into another instance.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a IPv4 or IPv6 route that was formerly allowed by the route-map
to be injected into EVPN gets an updated set of attributes that now
causes it to be filtered, the route needs to be pulled out of EVPN.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
If path->net is NULL in the bgp_path_info_free() function, then
bgpd would crash in bgp_addpath_free_info_data() with the following
backtrace:
(gdb) bt
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007ff7b267a42a in __GI_abort () at abort.c:89
#2 0x00007ff7b39c1ca0 in core_handler (signo=11, siginfo=0x7ffff66414f0, context=<optimized out>) at lib/sigevent.c:249
#3 <signal handler called>
#4 idalloc_free_to_pool (pool_ptr=pool_ptr@entry=0x0, id=3) at lib/id_alloc.c:368
#5 0x0000560096246688 in bgp_addpath_free_info_data (d=d@entry=0x560098665468, nd=0x0) at bgpd/bgp_addpath.c:100
#6 0x00005600961bb522 in bgp_path_info_free (path=0x560098665400) at bgpd/bgp_route.c:252
#7 bgp_path_info_unlock (path=0x560098665400) at bgpd/bgp_route.c:276
#8 0x00005600961bb719 in bgp_path_info_reap (rn=rn@entry=0x5600986b2110, pi=pi@entry=0x560098665400) at bgpd/bgp_route.c:320
#9 0x00005600961bf4db in bgp_process_main_one (safi=SAFI_MPLS_VPN, afi=AFI_IP, rn=0x5600986b2110, bgp=0x560098587320) at bgpd/bgp_route.c:2476
#10 bgp_process_wq (wq=<optimized out>, data=0x56009869b8f0) at bgpd/bgp_route.c:2503
#11 0x00007ff7b39d5fcc in work_queue_run (thread=0x7ffff6641e10) at lib/workqueue.c:294
#12 0x00007ff7b39ce3b1 in thread_call (thread=thread@entry=0x7ffff6641e10) at lib/thread.c:1606
#13 0x00007ff7b39a3538 in frr_run (master=0x5600980795b0) at lib/libfrr.c:1011
#14 0x000056009618a5a3 in main (argc=3, argv=0x7ffff6642078) at bgpd/bgp_main.c:481
Add a null-check protection to fix this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In BGP , same update api called for all three add/delete/update operation .
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
Executed some evpn related tests with valgrind and saw some errors
related to uninitialized memory and overlapping memcpy. This commit
fixes those.
Ticket: CM-21218
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8249
the list of iprules is displayed in the 'show bgp ipv4 flowspec detail'
The list of iprules is displayed, only if it is installed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when removing bgp instance, the parsing of rm->info contexts must be
protected. Also, the main level of hierarchy of rds must not be
allocated more than once.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Further refine the previous commit to store the hash value in
both the `struct community_list` as well as the `struct rmap_community`
structures. This allows us to know a priori what our hash value
is. This change cuts another couple of seconds of convergence
off to ~55 seconds and further reduces cpu load of bgp:
16 40061.706 433732 92 330102 129 1242965 RWTEX TOTAL
Down from ~43 seconds previously.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit is the last missing piece to complete BGP LU support in bgpd. To this moment, bgpd (and zebra) supported auto label assignment only for prefixes leaked from VRFs to vpn and for MPLS SR prefixes. This adds auto label assignment to other routes types in bgpd. The following enhancements have been made:
* bgp_route.c:bgp_process_main_one() now sets implicit-null local_label to all local, aggregate and redistributed routes.
* bgp_route.c:bgp_process_main_one() now will request a label from the label pool for any prefix that loses the label for some reason (for example, when the static label assignment config is removed)
* bgp_label.c:bgp_reg_dereg_for_label() now requests labels from label pool for routes which have no associated label index
* zebra_mpls.c:zebra_mpls_fec_register() now expects both label and label_index from the calling function, one of which must be set to MPLS_INVALID_LABEL or MPLS_INVALID_LABEL_INDEX, based on this it will decide how to register the provided FEC.
Signed-off-by: Anton Degtyarev <anton@cumulusnetworks.com>
Default vrf name has been changed in show route. Because the default vrf
name can be configured in zebra, the default vrf name in bgp is changed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
if default vrf is not Default, then nexthop vrf name returned may be
"Default", which is not the correct name of default vrf. change it
accordingly.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add some code that will reject local mac's from
being installed and add some code that will cause
a rescan when we have a local mac change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
When you have configured soft reconfiguration inbound
for evpn allow it to notice and send in the evpn data
as appropriate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The adj_out data structure is a linked list of adjacencies
1 per update group. In a large scale env where we are
not using peer groups, this list lookup starts to become
rather costly. Convert to a better data structure for this.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. "show bgp ipv4/ipv6 [json]"
2. "show bgp ipv4/ipv6 neighbor <peer> routes [json]"
3. "show bgp ipv4/ipv6 neighbors <peer> advertised-routes [json]"
In the above show commands, when a BGP path is displayed, we do not display the
local preference if it is EBGP route. Route calculation assumes the default
local preference. But, we can change the default local preference using
configuration in FRR. In this case, user should know the default local
preference value that is being used in the route calculation. Thus, adding a
new field 'default local preferece' in the show commands where a BGP path is
displayed.
When a BGP path is displayed in the above show commands, as-path does not
include the local AS. So, user has to execute another show command to display
the local-AS. To avoid this, adding a new field local-AS to above show commands.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
The bgp_distance_set_node_info and bgp_distance_get_node_info
function names were slightly backwards lets fix them up
to bgp_node_get_bgp_distance_info and bgp_node_set_bgp_distance_info
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_static_set_node_info and bgp_static_get_node_info
function names were slightly backwards rename to
bgp_node_get_bgp_static_info and bgp_node_set_bgp_static_info
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_aggregate_set_node_info and bgp_aggregate_get_node_info
functions names were slightly backwards, rename to
bgp_node_get_bgp_aggregate_info and bgp_node_set_bgp_aggregate_info
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_info data is stored as a void pointer in `struct bgp_node`.
Abstract retrieval of this data and setting of this data
into functions so that in the future we can move around
what is stored in bgp_node.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The motivation for this patch is to address a concerning behavior of
tx-addpath-bestpath-per-AS. Prior to this patch, all paths' TX ID was
pre-determined as the path was received from a peer. However, this meant
that any time the path selected as best from an AS changed, bgpd had no
choice but to withdraw the previous best path, and advertise the new
best-path under a new TX ID. This could cause significant network
disruption, especially for the subset of prefixes coming from only one
AS that were also communicated over a bestpath-per-AS session.
The patch's general approach is best illustrated by
txaddpath_update_ids. After a bestpath run (required for best-per-AS to
know what will and will not be sent as addpaths) ID numbers will be
stripped from paths that no longer need to be sent, and held in a pool.
Then, paths that will be sent as addpaths and do not already have ID
numbers will allocate new ID numbers, pulling first from that pool.
Finally, anything left in the pool will be returned to the allocator.
In order for this to work, ID numbers had to be split by strategy. The
tx-addpath-All strategy would keep every ID number "in use" constantly,
preventing IDs from being transferred to different paths. Rather than
create two variables for ID, this patch create a more generic array that
will easily enable more addpath strategies to be implemented. The
previously described ID manipulations will happen per addpath strategy,
and will only be run for strategies that are enabled on at least one
peer.
Finally, the ID numbers are allocated from an allocator that tracks per
AFI/SAFI/Addpath Strategy which IDs are in use. Though it would be very
improbable, there was the possibility with the free-running counter
approach for rollover to cause two paths on the same prefix to get
assigned the same TX ID. As remote as the possibility is, we prefer to
not leave it to chance.
This ID re-use method is not perfect. In some cases you could still get
withdraw-then-add behaviors where not strictly necessary. In the case of
bestpath-per-AS this requires one AS to advertise a prefix for the first
time, then a second AS withdraws that prefix, all within the space of an
already pending MRAI timer. In those situations a withdraw-then-add is
more forgivable, and fixing it would probably require a much more
significant effort, as IDs would need to be moved to ADVs instead of
paths.
Signed-off-by Mitchell Skiba <mskiba@amazon.com>
Same sequence number handling is specified by RFC 7432 -
[
If two (or more) PEs advertise the same MAC address with the same
sequence number but different Ethernet segment identifiers, a PE that
receives these routes selects the route advertised by the PE with the
lowest IP address as the best route.
If the PE is the originator of the MAC route and it receives the same
MAC address with the same sequence number that it generated, it will
compare its own IP address with the IP address of the remote PE and
will select the lowest IP. If its own route is not the best one, it
will withdraw the route.
]
To implement that specification this commit uses nexthop IP as a tie
breaker between two paths of equal seq number with lower IP winning.
Now if a local path already exists with the same sequence number but higher
(local-VTEP) IP it is evicted (deleted and withdrawn from the peers) and
the winning new remote path is installed in zebra. This is existing code
and handled implicitly via evpn_route_select_install.
If a local path is rxed from zebra with the same sequence as the
current remote winner it is rejected (not installed in the bgp
routing tables) and zebra is asked to re-install the older/remote winner.
This is a race condition that can only happen if bgp's add and zebra's add
cross paths. Additional handling has been added in this commit via
evpn_cleanup_local_non_best_route to take care of the race condition.
Ticket: CM-22674
Reviewed By: CCR-7937
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Problems were reported with the name of the default vrf and the
default bgp instance being different, creating confusion. This
fix changes both to "default" for consistency.
Ticket: CM-21791
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7658
Testing: manual testing and automated tests before pushing
