The lists documentation had not been updated to represent
the for_eachXXX to frr_eachXXX changes. Make it so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is an 8-ary heap (cacheline optimized.) It works as a semi-sorted
kind of middle ground between unsorted and sorted datastructures; pop()
always returns the lowest item but ordering is only loosely enforced.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turns out we need one of these. Same API as DECLARE_LIST, but deleting
random items is much faster.
Signed-off-by: David Lamparter <equinox@diac24.net>
The mpls-route module may be missing from Ubuntu 18.4. Provide info on
what pkg to install plus what directory py.test needs to be run from.
Signed-off-by: nikos <ntriantafillis@gmail.com>
Noticed during attempts at usage that the documentation
needed a couple small updates:
1) Tell the user which header to include
2) Some functions want the address of the data structure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Noticed during attempts at usage that the documentation
needed a couple small updates:
1) Tell the user which header to include
2) Some functions want the address of the data structure
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ralph has kindly granted us GPLv2+ license to use this documentation,
and requests that we keep a reference to his name. Add these facts to
the documentation.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Reflow to 80 columns
* Improve markup
* Add --apiserver option to example ospfd invocations
* Add note on requirement of this option to use api server
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
libyang defaults CMAKE_BUILD_TYPE to "Debug", which disables compiler
optimizations. We should instruct our users to build libyang in the
"Release" mode so that compiler optimizations are enabled and they
can benefit from the associated performance improvements.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove the following:
* gawk
* dejagnu
Add the following for FreeBSD 9 and OpenBSD 6:
* libexecinfo
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Update build package list
* Update ./configure options
* Fix some RST syntax errors
* Use monolithic config examples
* Use compile include snippet
* Reorganize a bit
Tested on Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Use compile include snippet
* Move daemons enable section to end
* Fix a couple syntax errors
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We're going to use this same snippet across every build doc so let's
just pull it into its own include file now.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Tested these on Fedora 24 and 28, so they should be true for all
versions in-between as well as Fedora 29 and all upcoming versions.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Upstream libyang now works with FRR; use it
* Install libyang to system library directories to satisfy pkg-config
* Remove warnings about ABI version
* Remove outdated binary package links
* Cleanup formatting
Validated that these instructions work on:
- Fedora 24
- Fedora 28.
- Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
it is possible to do some ponctual backporting of bug fixes, on older
than the 2 last maintenance releases.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add build-essential and, for platforms with systemd, libsystemd-dev to
the package list for builds
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Starting with libyang 0.16.74, we can load internally embedded yang
extensions instead of going through the file system/dlopen. Detect
support for this at build time and use if available.
NB: the fallback mechanism will go away in a short while.
Signed-off-by: David Lamparter <equinox@diac24.net>
The modules.rst documents how to create a module, let's update
it a bit to reflect what an end user needs to do a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately the first version of the FreeBSD libyang port contained
a bug in which the libyang pkginfo file wasn't being installed
correctly in the system, and this prevented the FRR build system from
detecting the library. This bug was already fixed months ago but some
FreeBSD package repositories still have the old bugged version of the
port. This means we can't suggest people to install libyang using
"pkg install" since this causes problems for most people. In this
case, suggest FreeBSD users to build and install libyang manually
as we suggest for other BSD platforms.
This commit should be reverted once all FreeBSD package repositories
are updated with the new version of the libyang port.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
explain why GPLv3 must be permitted, and explicitly mention that code
not compatible with GPLv3 is prohibited.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
* Add full version history with header diagrams
* Update field descriptions
* Update overview section
* Update list of protocol commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The --with-yangmodelsdir and --with-libyang-pluginsdir build-time options
pertain to FRR so they shouldn't be placed along with the libyang build
instructions. Move these instructions to where they belong to avoid
confusion.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These instructions are intended to be temporary until we have libyang
packages available for all supported platforms.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do a straight conversion of `struct bgp_info` to `struct bgp_path_info`.
This commit will setup the rename of variables as well.
This is being done because `struct bgp_info` is not descriptive
of what this data actually is. It is path information for routes
that we keep to build the actual routes nexthops plus some extra
information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The script simplifies the relatively lengthy procedure.
It should be invoked from the top level source directory, for example:
./tools/build-debian-package.sh
Signed-off-by: Daniil Baturin <daniil@baturin.org>
In some places we were using `frrvt` instead of `frrvty`. Make it consistent
with every other place and use frrvty.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sphinx actually does work with a parallel build, if the doctree creation
is a separate step (which the other builds will then just read
unmodified.) This can be done with the "dummy" target.
This also adds "-j6" to sphinx-build and adds a "--disable-doc-html"
switch on ./configure to turn on/off building HTML docs separately.
Also, HTML docs are now installed by "make install" to
/usr/share/doc/frr/html.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This roughly outlines when to use which logging function. It's
certainly something to have to point people to, so they get things nice
and right - and so we get at least somewhat consistent behaviour for the
user.
Signed-off-by: David Lamparter <equinox@diac24.net>
* Sphinx numbered lists use 1. not 1)
* Indents are three spaces
* Blocks under lists should be indented along with the rest of the list
content
* Sphinx converts :: to : when used as a code block marker
* Apply some preformatted markup to things that should be preformatted
* Remove trailing whitespace
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrap lines to 80 characters
* Update some portions to reflect current practices
* Clean up some formatting (indent, markup, etc)
* Reorganize sections on patch submission
* Remove link to nonexistent github wiki page
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Apparently Automake has some undocumented logic somewhere that makes it
so any Makefile generated from an Automake Makefile.am is removed from
its secret list of things to delete that it deletes when performing a
recursive distclean before actually performing the recursive distclean
and since the secret list is automatically generated from the list of
things that Autoconf should generate in configure.ac we can't remove the
Makefile from that list or it will break Automake's list of things to
automatically generate that it generates from Autoconf's list of things
to automatically generate.
Thus, to prevent Automake from deleting Makefiles and then immediately
trying to use the Makefiles it just deleted to delete said Makefiles, we
must remove ourselves from the secret list, which is accomplished by
changing the file extension to '.am' instead of '.in'.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The required packages list should be easier to parse. Updated the style so it's more similar to the ``./configure`` style later in the document.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
Names of the MPLS kernel modules changed slightly in recent kernel. Uses underscore instead of dash.
Signed-off-by: Jarad Olson <brotherdust+github@gmail.com>
Updated the doc to cross-reference build documentation as well and
reformatted to RST. Removed stub section on how to configure daemons and
whatnot, as that's the domain of the user docs.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Documentation was not fully using Automake / Autoconf and therefore needs
modifications to support black magic VPATH builds.
* Convert Makefile's to Autoconf-controlled Makefile.in's
* Tweak loading of pygments lexer to handle runtime paths
* Update .gitignore's as necessary
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The docs extract various configuration values from config.status and
substitute them into placeholders throughout the docs. Add the ability
to build the docs with some reasonable defaults set instead of failing
when config.status doesn't exist.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Pygments 2.2+ has `load_lexer_from_file`, but it looks like some of our
build platforms are on an older version.
Also gotta include the new file in dist tarball.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Currently, we just package the frr daemons, but we don't run
them. This is fine for basic tests, but it is inconvenient to
orchestrate the daemons from downstream test environments.
Here, we follow the redhat and debianpkg formats more closely,
putting the daemons in /usr/lib/frr and including the frr user
and groups in the package. We also include a docker specific
startup script and a sysvinit link in /etc/init.d/frr for
openrc based alpine installs.
Testing done:
Built packages, built base images, everything seems to work fine.
Uninstalled the package, all the daemons stopped.
Issue: https://github.com/FRRouting/frr/issues/2030
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
