There exists cases where we will attempt to hard delete
the bgp instance( say a `no router bgp` is issued )
when we have vrf route leaking. If we do have this
lock the bgp instance of the originator and do not
let it be deleted out from under us until we are
finished processing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are shutting down, there exists a code path
where the connected table leaks some memory. Cleanup
the code to remove the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have 2 code paths that were duplicating a bunch of code
for the deletion of connected prefixes.
This simplifies the code path and makes the code look a bit
cleaner.
I did not touch the _add path because the v4 if statement
had some code I did not have time to look into. Future project.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive a route that we think we own and we
are not in startup conditions, then add a small debug
to help debug the issue when this happens, instead
of silently just ignoring the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The re-use of RTPROT_STATIC has caused too many collisions
where other legitimate route sources are causing us to
believe we are the originator of the route. Modify
the code so that if another protocol inserts RTPROT_STATIC
we will assume it's a Kernel Route.
Fixes: #2293
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With:
commit ba7773964c
Author: Renato Westphal <renato@opensourcerouting.org>
Date: Wed Sep 20 22:12:56 2017 -0300
We added our own copy of if_link.h (among others). This
file unconditionally defines IFLA_WIRELESS, so we don't need
the conditional defines in the if_netlink.c code...
Issue: https://github.com/FRRouting/frr/issues/2299
Signed-off-by: Arthur Jones <arthur.jones@riverbed.com>
* Remove references to ospf source files from linklist.[ch]
* Remove documentation comments from hash.c and linklist.c
* Add comprehensive documentation comments to linklist.h and hash.h
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* list_dup(): duplicates a linked list
* list_sort(): in-place sort of linked list w/ ascending quicksort
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
On the case where an mp_unreach attribute is received, while there is no
mp_reach attribute too, it is not necessary to check for missing
attributes.
Fixes: 67495ddb2e ("bgpd: Fixes for recent well-known-attr check patch.")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Sometimes at startup, BGP Flowspec may be allocated a routing table
identifier not in the range of the predefined table range.
This issue is due to the fact that BGP peering goes up, while the BGP
did not yet retrieve the Table Range allocator.
The fix is done so that BGP PBR entries are not installed while
routing table identifier range is not obtained. Once the routing table
identifier is obtained, parse the FS entries and check that all selected
entries are installed, and if not, install it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Added following vty command:
[no] debug bgp pbr error
This permits dumping on the logs some errors related to PBR.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
On the case where an ecom from FS redirect is received, the ecom may be
with the format A.B.C.D:E. On this case, the printable format of the
Flowspec redirect VRF ecom value may use more bytes in the buffer
dedicated for that. The buffer that stores the ecommunity is increased.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
By default, some debug traces were displayed. Those pbr traces are
hidden with 'debug bgp zebra' command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The notification handler consecutive to an add/remove of a rule in zebra
is being added the FAIL_REMOVE flag. It is mapped on REMOVE flag
behaviour for now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Currently, uninstall pbr rule is not handled by BGP notification
handler. So the uninstall update of the structure is done, immediately
after sending the request of uninstall to zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
After PBR or BGP sends back a request for sending a rule/ipset/ipset
entry/iptable delete, there may be issue in deleting it. A notification
is sent back with a new value indicating that the removal failed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This hook can be used if the plugin module wrap_script is used.
This hook is called to dump the debugging status of this module, on the
vty.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following PBR handlers: ipset, and iptables will prioritary
call the hook from a possible plugin.
If a plugin is attached, then it will return a positive value.
That is why the return status is tested against 0 value, since that
means that there are no plugin module plugged
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There are cases where a redirect IP or redirect VRF stops the ecom
parsing, then ignores a subsequent rate value, letting passed value to
0. Consequently, a new table identifier may be elected, despite the
routing procedure is the same. This fix ignores the rate value in bpa
list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The ecommunity was badly read. This fix ensures that all ecom are reads
and stored in local structure.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
policy routing is configurable via address-family ipv4 flowspec
subfamily node. This is then possible to restrict flowspec operation
through the BGP instance, to a single or some interfaces, but not all.
Two commands available:
[no] local-install [IFNAME]
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Once PBR rules installed, an information is printed in the main
show bgp ipv4 flowspec detail information.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ability for BGP FS to convert some rules containining at least one
address and one port information into a pbr_match_entry rule.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those 3 fields are read and written between zebra and bgpd.
This permits extending the ipset_entry structure.
Combinatories will be possible:
- filtering with one of the src/dst port.
- filtering with one of the range src/ range dst port
usage of src or dst is exclusive in a FS entry.
- filtering a port or a port range based on either src or dst port.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When rule add transaction is sent from bgpd to zebra, the reference
context must not be incremented while the confirmation message of
install has not been sent back; unless if the transaction failed to be
sent.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
On some cases, the ecommunity flowspec for redirect vrf is not displayed
in all cases. On top of that, display the values if ecom can no be
decoded.
Also, sub_type and type are changed from int to u_int8_t, because the
values contains match the type and sub type of extended communities.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The debugging message in charge of showing if the route is added or
witdrawn is changed accordingly to reflect this status.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
