In route-map: `match tag untagged`.
E.g. Cisco/Juniper allows that, but they use `match tag 0` instead.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Changes update the user documentation to include a description of the
now available commands to enable/disable route-flap dampening for peers
and peer groups.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There is no support for option 8, as per RFC7854.
Add the 64 bit counter in the peer structure.
Add the missing per peer statistic.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some wireshark versions can not decode the experimental
bmp stat code. This may also be the case for some collectors.
Add a vty command to be able to disable bmp to sending
those values.
> [no] bmp stat send-experimental
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no support for option 7, as per RFC7854.
Add the 64 bit counter in the peer structure.
Add the 64 bit bmp value write api.
Add the missing per peer statistic.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This commit include OSPFAPI Server options to:
1. Allow specification of the OSPFAPI server local address.
2. Allow different OSPFAPI server TCP ports to be specified for different
OSPF instances in /etc/services.
Signed-off-by: Acee Lindem <acee@lindem.com>
This commit adds the capabiity to filter OSPF neighbors using a
prefix-list with rules matching the neighbor's IP source address.
Configuration, filtering, immediate neighbor pruning, topo-tests,
and documentation are included. The command is:
ip ospf neighbor-filter <prefix-list> [A.B.C.D]
Signed-off-by: Acee Lindem <acee@lindem.com>
RFC-7607 specifically calls out the allowed usage
of AS 0 to signal that the a particular address is
not in use and should be guarded against. Add
the ability to specify this special AS in the rpki
commands.
eva# show rpki as-number 0
RPKI/RTR prefix table
Prefix Prefix Length Origin-AS
2.57.180.0 22 - 24 0
2.58.144.0 22 - 22 0
2.59.116.0 24 - 24 0
4.42.228.0 22 - 22 0
5.57.80.0 22 - 22 0
<snip>
2a13:df87:b400:: 38 - 38 0
2a13:df84:: 32 - 32 0
2630:: 16 - 16 0
Number of IPv4 Prefixes: 1166
Number of IPv6 Prefixes: 617
eva# show rpki prefix 2630::/16 0
Prefix Prefix Length Origin-AS
2630:: 16 - 16 0
eva#
Fixes: #15778
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This extends non-broadcast support to point-to-multipoint networks.
Neighbors will be explicitly configured and polled in lieu of multicast
dicovery. Toptotests and documentation updates are included.
Additionally, the ospf neighbor commands have been greatly simplified taking
advantage of DEFPY() capabilities.
The AllOSPFRouters (224.0.0.5) is still joined for non-broadcast networks
since it is joined for NBMA networks. It seems this could be removed but
it should done be in a separate commit.
Signed-off-by: Acee Lindem <acee@lindem.com>
Dynamic capability provides more value without resetting the sessions for some
important other capabilities to exchange, like: graceful-restart, addpath, orf,
fqdn, etc.
Since we support it already, enable it by default.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There was a question in regards to how the update-source
choose the ip address for the source when using the `update-source`
command in BGP. Upon looking at the code, I was a but surprised,
so I decided to document this behavior.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Allow bandwidth up to 1000000 Mb/s (ie. 1 Tb/s) and document it.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
IRDP client (rdisc) was deleted from iputils more than 2 years ago. It's
time to drop IRDP, but first let's stop building and including it in the
packages by default to see if anyone will be complaining.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Make link-params a presence container and activate it when entering the
node. The "enable" command is not necessary anymore but kept hidden for
backwards compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Introduce new "[no] multicast <enable|disable>" command to be able to
remove the configuration. Current "[no] multicast" command cannot be
removed. Current command is hidden but still works for backwards
compatibility.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Add documentation for per VRF RPKI commands
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
mgmtd has to know if netns is used as the vrf backend to correctly
process interface names in northbound.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When filtering with `debug bgp updates in x.x.x.x prefix-list plist`, we want
to filter out unnecessary messages like:
```
127.0.0.1(Unknown) rcvd UPDATE wlen 0 attrlen 20 alen 5
```
Such a line as above will be repeated for all the paths received and it's useless
without knowing the prefix (because NLRIs are not parsed yet).
But want to see only relevant ones:
```
127.0.0.1(Unknown) rcvd UPDATE w/ attr: nexthop 127.0.0.1, origin i, path 65002
127.0.0.1(Unknown) rcvd 10.255.255.1/32 IPv4 unicast
```
With `debug bgp updates detail` we can combine this to something like:
```
127.0.0.1(Unknown) rcvd UPDATE w/ attr: nexthop 127.0.0.1, origin i, path 65002
127.0.0.1(Unknown) rcvd UPDATE wlen 0 attrlen 20 alen 5
127.0.0.1(Unknown) rcvd 10.255.255.1/32 IPv4 unicast
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the 'computed' keyword for a given metric.
> [..]
> metric te computed
When set by the PCC, the PCE must send back a computed metric
value in the PCResponse value.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The `show segment-routing srv6 manager` CLI command allows users to
print the SRv6 information. Currently, the SRv6 information includes
only the SRv6 encapsulation source address.
In this commit, we add the documentation for the
`show segment-routing srv6` command.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Explain that an export route target list can be configured
alternatively by using route-maps.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It should be possible to reset the configured msd value,
and not mentioning the previous msd value.
> ubuntu2204(config-sr-te-pcep-pcc)# no msd
> % Command incomplete: no msd
> ubuntu2204(config-sr-te-pcep-pcc)#
Fix this by defining the msd parameter optional, and
separating the 'no msd' command from the 'msd' command.
Fixe: efba0985fc ("pathd: Add optional support for PCEP to pathd")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With a BGP configuration with ipv4 peering, and ipv6 peering, an snmpwalk
is stopped while walking over the bgp4v2NlriTable
snmpwalk -c TEST -v2c -On -Ln 1.1.1.2 .1.3.6.1.3.5.1.1.4
[...]
.1.3.6.1.3.5.1.1.4.1.2.1.2.32.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1 = Gauge32: 13380
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0 = Gauge32: 0
>= .1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.1.0.24.0.0.0.0
The walk stopped because the index used in the NlriTable entries is
decrementing, and this is against the snmp specifications. Also, the
computed index is wrong, and does not match the provided
draft-ietf-idr-bgp4-mibv2-1 specification.
Fix this by computing a valid index, and by finding out the next
consecutive prefix.
The resulting changes do not break the walk, and the output is changed:
root@dut-vm:~# snmpwalk -v 2c -c public -Ln -On localhost 1.3.6.1.3.5.1.1.9.1
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.1.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Gauge32: 0
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.2.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.3.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.4.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = INTEGER: 1
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.200.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A C8 00 00
.1.3.6.1.3.5.1.1.9.1.5.1.1.1.1.10.244.0.0.24.1.10.125.0.2.1 = Hex-STRING: 0A F4 00 00
Fixes: c681e937d7 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 1)
Fixes: 2ce69011c4 (bgpd: Implement SNMP
BGP4V2-MIB (bgp4V2NlriTable), part 2)
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
use CHECK_FLAG
fix comment spaces
change zlog_debug to zlog_warn
safeguard on updated_route
added doc/developer/bmp.rst to subdir.am
other qol changes
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
moved loc-rib uptime field "bgp_rib_uptime" to struct bgp_path_info_extra for memory concerns
moved logic into bgp_route_update's callback bmp_route_update
written timestamp in per peer header
Signed-off-by: Maxence Younsi <mx.yns@outlook.fr>
It's been for a while disabled by default, but this seems reasonable to flip it.
We had `bgp enforce-first-as` as a global BGP knob to enable/disable this
behavior globally, later we introduced `enforce-first-as` per neighbor, with disabled
by default. Now let's enable this by default by bringing a global `bgp enforce-first-as`
command back.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add the redistribute table/table-direct command in the
user guide.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
For now it includes only FQDN capability, because other capabilities can be
resend using specific knobs.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
With the deprecation of the global "bgp enforce-first-as" command back
in https://github.com/FRRouting/frr/pull/2259 the newly introduced
option to enable that setting on a specific peer was not documented.
This commit adds the necessary documentation and states the command's
default.
Signed-off-by: Manuel Schweizer <manuel.schweizer@cloudscale.ch>
Add the new command "show debugging labeltable" to show allocated label
chunks in the label table managed with label_manager.c
Signed-off-by: Farid Mihoub <farid.mihoub@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
requirements.txt was pinning sphinx at a very old version. This version
doesn't work in recent versions of Python; the new RTD configuration
made RTD respect our requirements file, breaking the build.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
As of Sep 25 2023, RTD projects require config files to build. This
patch is necessary for docs to continue to build.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
No such thing exists.
/root/frr/doc/user/ospfd.rst:624: WARNING: Cannot analyze code. No Pygments lexer found for "frr".
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
/root/frr/doc/user/ospfd.rst:609: WARNING: Bullet list ends without a blank line; unexpected unindent.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Provide a paragraph for srv6 multiple segs SIDs in documentation
to describe the multiple segs functionality.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
This patch includes:
* Implementation of RFC 5709 support in OSPF. Using
openssl library and FRR key-chain,
one can use SHA1, SHA256, SHA384, SHA512 and
keyed-MD5( backward compatibility with RFC 2328) HMAC algs.
* Updating documentation of OSPF
* add topotests for new HMAC algorithms
Signed-off-by: Mahdi Varasteh <varasteh@amnesh.ir>
Subset: doc and tests
doc
PBR section updated with new fields and some copy-editing
tests
pbr_topo1: ensure new vlan fields arrive at zebra
Changes by:
Josh Werner <joshuawerner@mitre.org>
Eli Baum <ebaum@mitre.org>
G. Paul Ziemba <paulz@labn.net>
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Useful to have it for datacenter profile only, disabled for traditional.
If the peer is not established or established, but has no description set,
we will show the FRR version instead, which is kinda handy to have instead of
nothing.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
User can now use 'show ip ospf route detail' command to distinguish
intra-area stub network and transit network.
Transit network will be displayed as 'N T prefix ...'.
NOTICE: Json output format has been changed, intra-area transit networks
will have a new attribute 'transit' and value is 'true'.
And 'adv' (means advertise router) change to 'advertisedRouter'.
Example output:
bsp-debianrt-exp1# show ip ospf route detail
Codes: N - network T - transitive
IA - inter-area E - external route
D - destination R - router
============ OSPF network routing table ============
N T 10.0.0.0/24 [32] area: 0.0.0.0
via 192.168.124.67, ens192
adv 10.0.0.5
N 10.0.30.0/24 [33] area: 0.0.0.0
via 192.168.124.67, ens192
adv 10.0.0.5
...
Signed-off-by: Zhiyuan Wan <h@iloli.bid>
The yang model does not handle the table identifier in IS-IS.
For each redistributed each address family, a new list of
table elements is added to store the table identifier to
redistribute, and also the optional metric and route-map values
for each table identifier.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is no route-map set action to replace any ASN,
or a part of an ASN, with a configured ASN.
The current commit adds a new command to use a configured
ASN as replacement, instead of using the local as number.
> set as-path replace any 65500
Update the 'bgp_set_aspath_replace' test.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add support for "[no] ip ospf capbility opaque" at the interface
level with the default being capability opaque enabled. The command
"no ip ospf capability opaque" will disable opaque LSA database
exchange and flooding on the interface. A change in configuration
will result in the interface being flapped to update our options
for neighbors but no attempt will be made to purge existing LSAs
as in dense topologies, these may received by neighbors through
different interfaces.
Topotests are added to test both the configuration and the LSA
opaque flooding suppression.
Signed-off-by: Acee <aceelindem@gmail.com>
It is not possible to flush all the incoming as-path list
from a given BGP update.
Add a route-map set command to remove all as-paths
from a given AS path. Add the necessary tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Looks like people don't find what does it mean (Policy) at first shot, let's
try giving more hints here.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Currently, delayed reflooding on P2MP interfaces for LSAs received
from neighbors on the interface is unconditionally (see commit
c706f0e32b). In some cases, this
change wasn't desirable and this feature makes delayed reflooding
configurable for P2MP interfaces via the CLI command:
"ip ospf network point-to-multipoint delay-reflood" in interface
submode.
Signed-off-by: Acee <aceelindem@gmail.com>
`ccls` needs information from FRR build configuration to work,
so allow creation of a custom ccls config during autoconf.
Paraphrasing the doc entry: ccls is a very powerful tool that allows
dev environments to provide sophisticated IDE functionality, e.g.,
semantically aware jumps and code refactoring...
Signed-off-by: Christian Hopps <chopps@labn.net>
