mirror of
https://git.proxmox.com/git/mirror_frr
synced 2025-08-13 09:56:05 +00:00
Revert "doc: add the bgp link-state user documentation"
This reverts commit 115f4f1ddd.
This commit is contained in:
Donald Sharp
parent
166e52d6a3
commit
da622a28e6
@ -1,107 +0,0 @@
|
||||
.. _bgp-link-state:
|
||||
|
||||
BGP Link-State
|
||||
==============
|
||||
|
||||
Overview
|
||||
--------
|
||||
|
||||
BGP Link-State (BGP-LS) is an extension of the BGP protocol designed to
|
||||
redistribute information from an IGP database to a remote controller (most
|
||||
likely a Path Computation Element - PCE). BGP-LS does nothing more than
|
||||
transport IGP information. Therefore, it cannot be used to replace a Link State
|
||||
routing protocol like OSPF and IS-IS.
|
||||
|
||||
Historically, the only way to get a network controller to collect an IGP
|
||||
database was to have it participate in the IGP itself as if it were a standard
|
||||
router. Since the controllers were usually located far from the IGP area,
|
||||
tunnels such as GRE were used to connect the controllers to the IGP area. This
|
||||
method was so impractical that an alternative solution was imagined: using the
|
||||
already deployed inter-domain BGP protocol to redistribute the various IGP
|
||||
databases.
|
||||
|
||||
BGP Link-State as defined in `RFC7752
|
||||
<https://www.rfc-editor.org/rfc/rfc7752.html>`_ uses the AFI 16388 and SAFI 71.
|
||||
The BGP Link-State pseudo-prefixes distributed by the `NLRI (Network Layer
|
||||
Reachability Information)` uniquely define the following
|
||||
IGP information:
|
||||
|
||||
- Nodes
|
||||
- Link
|
||||
- IPv4 Prefix
|
||||
- IPv6 Prefix
|
||||
|
||||
They are called descriptors. In addition, a new type of BGP Attributes called
|
||||
"BGP-LS attributes" carries the other information related to a descriptor.
|
||||
|
||||
NLRI and attribute information for BGP-LS is organized using the TLV format
|
||||
already used by IS-IS LSPs and OSPF opaque LSAs. The `list of TLV code points
|
||||
<https://www.iana.org/assignments/bgp-ls-parameters/bgp-ls-parameters.xhtml#node-descriptor-link-descriptor-prefix-descriptor-attribute-tlv>`_
|
||||
is maintained by IANA.
|
||||
|
||||
Current implementation
|
||||
----------------------
|
||||
|
||||
The current version can participate in BGP Link-State AFI / SAFI with
|
||||
third-party routers and forward the BGP Link-State descriptors and attributes to
|
||||
other routers. However, it can not generate BGP Link-State data from OSPF and
|
||||
IS-IS.
|
||||
|
||||
IANA maintains a `registry of BGP-LS NRLI descriptor types
|
||||
<https://www.iana.org/assignments/bgp-ls-parameters/bgp-ls-parameters.xhtml#nlri-types>`_.
|
||||
Only the following RFC7752 NRLI types are supported by the current version:
|
||||
|
||||
- Nodes
|
||||
- Link
|
||||
- IPv4 Prefix
|
||||
- IPv6 Prefix
|
||||
|
||||
The BGP-LS attribute TLVs for these NLRI types are transmitted as is to other
|
||||
routers which means that all the current and future version are already
|
||||
supported.
|
||||
|
||||
Show commands
|
||||
-------------
|
||||
|
||||
The following configuration enables the negotiation of the link-state AFI / SAFI
|
||||
with the 192.0.2.2 eBGP peer.
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
router bgp 65003
|
||||
neighbor 192.0.2.2 remote-as 65002
|
||||
neighbor 192.0.2.2 update-source 192.0.2.3
|
||||
!
|
||||
address-family link-state link-state
|
||||
neighbor 192.0.2.2 activate
|
||||
neighbor 192.0.2.2 route-map PERMIT-ALL in
|
||||
neighbor 192.0.2.2 route-map PERMIT-ALL out
|
||||
exit-address-family
|
||||
exit
|
||||
!
|
||||
route-map PERMIT-ALL permit 1
|
||||
|
||||
The BGP-LS table can be displayed.
|
||||
|
||||
.. code-block:: frr
|
||||
|
||||
frr# show bgp link-state link-state
|
||||
BGP table version is 8, local router ID is 192.0.2.3, vrf id 0
|
||||
Default local pref 100, local AS 65003
|
||||
Network Next Hop Metric LocPrf Weight Path
|
||||
*> Node OSPFv2 ID:0x20 Local{AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1}/48
|
||||
0 65002 65001 i
|
||||
*> IPv4-Prefix OSPFv2 ID:0x20 Local{AS:65001 ID:0 Area:0 Rtr:10.10.10.10:1.1.1.1} Prefix{IPv4:89.10.11.0/24}/64
|
||||
0 65002 65001 i
|
||||
*> IPv6-Prefix ISIS-L2 ID:0x20 Local{AS:65001 ID:0 Rtr:0000.0000.1003.00} Prefix{IPv6:12:12::12:12/128 MT:2}/74
|
||||
0 65002 65001 i
|
||||
*> IPv6-Prefix OSPFv3 ID:0x20 Local{AS:65001 ID:0 Area:0 Rtr:10.10.10.10} Prefix{OSPF-Route-Type:1 IPv6:12:12::12:12/128 MT:2}/74
|
||||
0 65002 65001 i
|
||||
*> Node OSPFv2 ID:0x20 Local{AS:65001 ID:0 Area:0 Rtr:10.10.10.10}/48
|
||||
0 65002 65001 i
|
||||
*> Node ISIS-L1 ID:0x20 Local{AS:65001 ID:0 Rtr:0000.0000.1003.00}/48
|
||||
0 65002 65001 i
|
||||
*> Link ISIS-L1 ID:0x20 Local{AS:65001 ID:0 Rtr:0000.0000.1001} Remote{AS:65001 ID:0 Rtr:0000.0000.1000} Link{IPv4:10.1.0.1 Neigh-IPv4:10.1.0.2 IPv6:2001::1 Neigh-IPv6:2001::2 MT:0,2}/132
|
||||
0 65002 65001 i
|
||||
|
||||
|
||||
@ -1837,13 +1837,6 @@ Configuring Peers
|
||||
and is not displayed.
|
||||
The `bgp default l2vpn-evpn` form of the command is displayed.
|
||||
|
||||
.. clicmd:: bgp default link-state
|
||||
|
||||
This command allows the user to specify that the link-state link-state
|
||||
address family is turned on by default or not. This command defaults to off
|
||||
and is not displayed.
|
||||
The `bgp default link-state` form of the command is displayed.
|
||||
|
||||
.. clicmd:: bgp default show-hostname
|
||||
|
||||
This command shows the hostname of the peer in certain BGP commands
|
||||
@ -5243,7 +5236,6 @@ Show command json output:
|
||||
|
||||
.. include:: flowspec.rst
|
||||
|
||||
.. include:: bgp-linkstate.rst
|
||||
|
||||
.. _bgp-fast-convergence:
|
||||
|
||||
|
||||
@ -130,7 +130,6 @@ exclude_patterns = [
|
||||
"rpki.rst",
|
||||
"routeserver.rst",
|
||||
"ospf_fundamentals.rst",
|
||||
"bgp-linkstate.rst",
|
||||
"flowspec.rst",
|
||||
"snmptrap.rst",
|
||||
"wecmp_linkbw.rst",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user