Document the newly added commands to limit the maximum amount of
groups/source to learn.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add documentation for existing extended access-list functionality and
the new "ip multicast boundary" command leveraging that functionality.
Signed-off-by: Corey Siltala <csiltala@atcorp.com>
Document 'router pim[6] [vrf NAME]' configuration.
All the commands are basically the same, just dropped the
'ip pim[6]' prefix and document them under the router pim block.
Signed-off-by: Nathan Bahr <nbahr@atcorp.com>
1. Added interface name, group address and detail option to existing
"show ip igmp groups" so that user can retrieve all the groups
or a particular group for an interface. Detail option shows the source
information for the group. With that, the show command
looks like:
"show ip igmp [vrf NAME$vrf_name] groups [INTERFACE$ifname [GROUP$grp_str]] [detail$detail] [json$json]"
2. Changed pim_cmd_lookup_vrf() to return empty JSON if VRF is not present
3. Changed "detail" option to print non pretty JSON
4. Added interface name and group address to existing
"show ip igmp sources" so that user can retrieve all the sources for
all the groups or, all the sorces for a particular group for an
interface. With that, the show command looks like:
"show ip igmp [vrf NAME$vrf_name] sourcess [INTERFACE$ifname [GROUP$grp_str]] [json$json]"
Signed-off-by: Pooja Jagadeesh Doijode <pdoijode@nvidia.com>
Adjust doc:
1. Correct the pid path for daemons
2. Add empty line before `kill` command
3. Remove one useless line in "ripd.rst"
Signed-off-by: anlan_cs <vic.lan@pica8.com>
And filter by group for PIM.
```
exit1-debian-11# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
192.168.10.110 232.0.0.0/24 eth2 no Static SSM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24
RP address group/prefix-list OIF I am RP Source Group-Type
192.168.10.17 238.0.0.0/24 eth2 no Static ASM
exit1-debian-11# show ip pim rp-info 238.0.0.0/24 json
{
"192.168.10.17":[
{
"rpAddress":"192.168.10.17",
"outboundInterface":"eth2",
"iAmRP":false,
"group":"238.0.0.0/24",
"source":"Static",
"groupType":"ASM"
}
]
}
exit1-debian-11#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
`show ip pim assert` shows S,G ifchannel information even when
there is no information available about the assert process.
Fix the code to not dump non-interesting cases.
Fixes: 10462
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While going through the doc, found some commands are missing in the doc.
Also correcting few mistakes.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Problem:
=======
Generate query once cli is generating IGMPv2 report for IGMPv3 enabled interface
Description:
===========
If the version is not specified in the cli, it was taking version 2 as default
Fix:
===
If the version is not specified in the cli along with ip igmp generate-query-once,
the default will be the version enabled on that interface.
Signed-off-by: nsaigomathi <nsaigomathi@vmware.com>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
Making the interface holdtime range to 3.5 times the hello-time
As per 7761, Section 4.11:
The Holdtime in a Hello message should be set to
(3.5 * Hello_Period), giving a default value of 105 seconds.
Therefore providing the user also to configure max upto 3.5 times
the hello timer interval.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Most of these are many, many years out of date. All of them vary
randomly in quality. They show up by default in packages where they
aren't really useful now that we use integrated config. Remove them.
The useful ones have been moved to the docs.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
These don't need to be documented, most of the time they are obvious,
when they aren't the behavior can just be described in the command
description.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
- Generate index entries automatically
- Remove manual command index entries
- Clean up a few other manual index entries
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
