LSP processing was a zvrf flag based upon a connected route
coming or going. But this did not allow us to know
that we should do lsp processing other than after the meta-queue
processing was finished.
Eventually we moved meta-queue processing of do_nht_processing
to after the dataplane sent the main pthread some results.
This of course left us with a timing hole where if a connected
route came in and we received a data plane response *before*
the meta queue was processed we would not do the work as necessary.
Move the lsp processing to a flag off of the rib_dest_t. If it
is marked then we need to process lsps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a detailed debugging command for NHT tracking and add
the detailed output to the log about why we make some decisions
that we are. I tried to model this like the rib processing
detailed debugs that we added a few months back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Currently nexthop tracking is performed for all nexthops that
are being tracked after a group of contexts are passed back
from the data plane for post install processing.
This is inefficient and leaves us sending nexthop tracking
changes at an accelerated pace, when we think we've changed
a route. Additionally every route change will cause us
to relook at all nexthops we are tracking irrelevant if
they are possibly related to the route change or not.
Let's modify the code base to track the rnh's off of the rib
table's rn, `rib_dest_t`. So after we process a node, install
it into the data plane, in rib_process_result we can
look at the `rib_dest_t` associated with the rn and see that
a nexthop depended on this route node. If so, refigure it.
Additionally we will store rnh's that are not resolved on the
0.0.0.0/0 nexthop tracking list. As such when a route node
changes we can quickly walk up the rib tree and notice that
it needs to be reprocessed as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a default route_node for our routing tables. This will allow us
to know that we can hang data off the default route for processing.
We will be hanging the nexthop tracking data structures off the rib_dest_t
so that we can know which nexthops we need to handle. Effectively
nexthops that we are tracking that are unresolved will be stored on the
default route. When something changes in the rib tree we can
work up the rn->parent pointer checking for nexthops we need to re-evaluate.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The resolved_route is the prefix we are using in the routing table
to resolve this particular nexthop we are tracking. Add code
to better track it's change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The prn value as passed in may be NULL as such do not
allow it to be derefed (even though it works now).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have several route types KERNEL and CONNECT that are handled via special
case in the code. This was causing a lot of work keeping the two different
classes of route types as special(SYSTEM OR NOT). Put the dplane
in charge of the code that sets the bits for signalling route install/failure.
This greatly simplifies the code calling path and makes all route types
be handled exactly the same. Additionaly code that we want to run
post data plane install can just work as per normal then, instead
of having to know we need to run it when we have a special type
of route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
When we get a route install failure from the kernel, actually
indicate in the rib the status of the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When switching routes from one route type to another actually
unset the old route as enqueued.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down, the individual vrf's own the shutdown of the table
and subsuquent removal from the routes from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When shutting down and we have a very large table to shutdown
and after we've intentionally closed all the client connections
close the zebra zserv client socket.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When something goes wrong with this test, having these turned
on will help us debug zebra processing a bit better in the
future without having to modify anything else.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't delete the Alpine docker image after the build.
Also, extract the packages from the build stage, so that we can
remove them from the final image.
It had no logical reason to be in the default VRF. This moves it to the
zebra_router, which is better suited to store global references.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
A lot of checks relied on the VRF ID and the EVPN VRF ID to be the same.
This patch changes those checks to the EVPN_ENABLED macro, which checks
if the VRF is the EVPN one.
Signed-off-by: Tuetuopay <tuetuopay@me.com>
Sponsored-by: Scaleway
The interface column in pim was limited to 8 or 9 columns
all over the place in pim, fix the code up to allow interface
length to be up to 16 columns.
Ticket: CM-23083
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We need libyang to build FRR, so add it to the make dependencies.
Alpine will automatically detect it as runtime dependency, so no
need to add it there.
The package binutils-libs doesn't exist anymore, so remove it from
the dependencies.
As we need libyang, which is only part of Alpine Linux edge/testing,
update the Dockerfile to use this repository.
Also, update the Dockerfile to adhere more to best common practices.
When using remove-private-AS together with local-as
aspath_remove_private_asns() is called before bgp_packet_attribute().
In this case, private AS will always appear in front of change_local_as.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Currently, as part of bgp clear soft inboud and outbound we don't handle
l2vpn evpn. Now clearing soft for all supported afi safi.
One of the examples where this was a problem -
On applying graceful-shutdown, bgp clear soft inboud and outbound don't
handle AFI L2VPN and SAFI EVPN. Gshut gets applied to EVPN Type 5 routes
by asking peer to refresh the routes (provided we have config - "advertise
ipv4/ipv6 unicast" as part of l2vpn evpn) but is not applied to type 2
and type 3 EVP routes. This fix takes care of l2vpn evpn type2 and type3
routes being readvertised with gshut community.
This fix also fixes similar issues related to following where bgp clear
soft is requred for l2vpn evpn -
-config bgp cluster-id
-config bgp client-to-client reflection
-config bgp default local-preference
-config bgp route-reflector allow-outbound-policy
-config bgp disable-ebgp-connected-route-check
Ticket: CM-22813
Signed-off-by: Nitin Soni <nsoni@cumulusnetworks.com>
Reviewed-by: CCR-8361
Testing-Done:
-With gshut configured on all BGP VRFs (operator has to know about the
auto-created BGP VRFs - we do show them in show commands - and turn on
graceful-shutdown in all of them.
-We announce all EVPN routes (type-2, type-3 and type-5) with GSHUT and
we mark IPv4/IPv6 routes in a VRF that are based on received EVPN type-2
or type-5 routes with local pref 0.
-On the receiver side, when EVPN routes are received with GSHUT, the
correct handling takes place (to treat them with local preference 0, and
hence not select them)
-When the gshut configuration is removed on all BGP VRFs, we re-announce
all of our EVPN routes without GSHUT and receiver does the appropriate
thing. Also, we no longer mark EVPN-based IPv4/IPv6 routes with local
pref 0.
-evpn-smoke
-bgp-smoke
We have the same warn message in 3 spots, which makes it extremely
hard to figure out which of the 3 has gone terribly wrong.
Add a bit of code to disambiguate the 3 situations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Apparently, the default changed to use `/etc/frr/daemons` instead of
`/etc/frr/daemons.conf`. Therefore, we should ignore absence of the
latter file, because its absence is not an actuall error but will
cause a confusing error message like this:
/etc/init.d/frr: line 507: /etc/frr/daemons.conf: No such file or directory
Fix the macros for reading NLA attribute info
from an extended error ack. We were processing the data
using route attributes (rtattr) which is identical in size
to nlattr but probably should not be used.
Further, we were incorrectly calculating the length of the
inner netlink message that cause the error. We have to read
passed that in order to access all the nlattr's.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
For a MAC-IP pair generally local/netlink msg for
MAC is received followed by Neigh. The MAC can be detected as duplicate
during this event.
When a neigh update is received, the neigh inherits DUP flag from its
MAC and along with that mark the neigh as INACTIVE.
Also, In the case of DUP detected neigh, do not update its state
to ACTIVE before determining to send notification to bgpd.
There is a time when Neigh update received prior to MAC update.
In that case neigh is marked as inactive since its MAC is
still in REMOTE state. Once the MAC update is received and
it is detected as DUPLICATE, the neigh would inherit DUP flag
but remained in inactive state.
By fixing the first case, the neigh remains in inactive once
detected as DUPLICATE in both scenarios.
The unfreeze action would mark all inherited neighs to ACTIVE,
and clears DUP flag then sends notification to bgpd (to send type-2).
Ticket:CM-24339
Reviewed By:CCR-8451
Testing Done:
Validated dup detection on both environment where neigh and mac
notification can come as either one first.
With the fix, the neigh was remained in "inactive" state
once detected as duplicate.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
* Update build package list
* Update ./configure options
* Fix some RST syntax errors
* Use monolithic config examples
* Use compile include snippet
* Reorganize a bit
Tested on Ubuntu 18.04
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Use compile include snippet
* Move daemons enable section to end
* Fix a couple syntax errors
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We're going to use this same snippet across every build doc so let's
just pull it into its own include file now.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Change the router log output to the previous folder so it doesn't get
erased when starting the old API (unbreaks command/output logging on
Topogen).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
