Implementing the TBD of watermark-warn CLI for IPv6 MLD
This command can be use to warn the user
when more than the desired limit of groups gets configured.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
Modifying igmp_watermark_limit of struct pim_instance
to gm_watermark_limit which is to be used for both IGMP and MLD.
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
The normal flag was enabling detail messages, but what we want is the
detail flag enabling normal messages.
Remove the _ONLY macro while at it, it's only used for config print &
that seems like a place where making the difference explicitly visible
is helpful regardless.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The only function these macros have is to make the code confusing.
"PIM_IF_DO_PIM" sounds like it triggers some action, but it doesn't.
Replace with "bool" fields in struct pim_interface.
(Note: PIM_IF_*_IGMP_LISTEN_ALLROUTERS was always set, without any way
to unset it. It is completely removed now and always enabled.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem Statement:
=================
PIM Logs are coming at interval of 1 minute although pim
is not enabled.
Root Cause Analysis:
====================
By default, RCPM configures the PIM debugs when router comes up
via script. The product cannot disable PIM even though it is not required.
Hence moving these logs under a new debug option which will not be
enabled by default.
Fix:
====
Added a new option "detail" in the cli:
debug pim nht detail
Co-author: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
VRF name should not be printed in the config since 574445ec. The update
was done for NB config output but I missed it for regular vty output.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
These really don't serve much of a purpose, especially with how
inconsistently they're used.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issues: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Co-authored-by: Sarita Patra <saritap@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
Fix:
====
Modifying name of struct igmp_join to struct gm_join, which is to be used
by both IPv4 and IPv6(for both MLD and IGMP).
Co-authored-by: Abhishek N R abnr@vmware.com
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
Modifying the members of pim_interface which are to be used
for both IPv4 and IPv6 to common names(for both MLD and IGMP).
Issue: #10023
Co-authored-by: Mobashshera Rasool <mrasool@vmware.com>
Signed-off-by: Sai Gomathi <nsaigomathi@vmware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
VRF creation can happen from either cli or from
knowledged about the vrf learned from zebra.
In the case where we learn about the vrf from
the cli, the vrf id is UNKNOWN. Upon actual
creation of the vrf, lib/vrf.c touches up the vrf_id
and calls pim_vrf_enable to turn it on properly.
At this point in time we have a pim->vrf_id of
UNKNOWN and the vrf->vrf_id of the right value.
There is no point in duplicating this data. So just
remove all pim->vrf_id and use the vrf->vrf_id instead
since we keep a copy of the pim->vrf pointer.
This will remove some crashes where we expect the
pim->vrf_id to be usable and it's not.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Problem reported that when certain pim commands were entered, they
showed up duplicated in the configuration both under default instance
and every vrf (whether pim was used there or not.) This was because
these particular parameters are global only and the function doing
the display would repeat for each vrf. This fix only displays those
in the default case (and removes them from the help for entering
under a vrf.)
Signed-off-by: Don Slice <dslice@nvidia.com>
Display the MSDP peer configuration in `show running-config` so it can
be saved on configuration write.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
pim is enabled internally/implicitly on the vxlan termination device
and displaying that can confuse the admin and tools (such as
frr-reload).
Ticket: CM-30180
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This CLI will allow user to configure a igmp group limit which will generate
a watermark warning when reached.
Though watermark may not make sense without setting a limit, this
implementation shall serve as a base to implementing limit in future and helps
tracking a particular scale currently.
Testing:
=======
ip igmp watermark-warn <10-60000>
on reaching the configured number of group, pim will issue warning
2019/09/18 18:30:55 PIM: SCALE ALERT: igmp group count reached watermak limit: 210(vrf: default)
Also added group count and watermark limit configured on cli - show ip igmp groups [json]
<snip>
Sw3# sh ip igmp groups json
{
"Total Groups":221, <=====
"Watermark limit":210, <=========
"ens224":{
"name":"ens224",
"state":"up",
"address":"40.0.0.1",
"index":6,
"flagMulticast":true,
"flagBroadcast":true,
"lanDelayEnabled":true,
"groups":[
{
"source":"40.0.0.1",
"group":"225.1.1.122",
"timer":"00:03:56",
"sourcesCount":1,
"version":2,
"uptime":"00:00:24"
<\snip>
<snip>
Sw3(config)# do sh ip igmp group
Total IGMP groups: 221
Watermark warn limit(Set) : 210
Interface Address Group Mode Timer Srcs V Uptime
ens224 40.0.0.1 225.1.1.122 ---- 00:04:06 1 2 00:13:22
ens224 40.0.0.1 225.1.1.144 ---- 00:04:02 1 2 00:13:22
ens224 40.0.0.1 225.1.1.57 ---- 00:04:01 1 2 00:13:22
ens224 40.0.0.1 225.1.1.210 ---- 00:04:06 1 2 00:13:22
<\snip>
Signed-off-by: Saravanan K <saravanank@vmware.com>
When pim receives a register packet, we will apply the
received source to the prefix list. If accepted normal
processing continues. If denied we will send a register
stop message to the source.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Upstream entries associated with tunnel termination mroutes are
synced to the MLAG peer via the local MLAG daemon.
2. These entries are installed in the peer switch (via an upstream
ref flag).
3. DF (Designated Forwarder) election is run per-upstream entry by both
the MLAG switches -
a. The switch with the lowest RPF cost is the DF winner
b. If both switches have the same RPF cost the MLAG role is
used as a tie breaker with the MLAG primary becoming the DF
winner.
4. The DF winner terminates the multicast traffic by adding the tunnel
termination device to the OIL. The non-DF suppresses the termination
device from the OIL.
Note: Before the PIM-MLAG interface was available hidden config was
used to test the EVPN-PIM functionality with MLAG. I have removed the
code to persist that config to avoid confusion. The hidden commands are
still available.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Allow 'ip igmp join' to join group for any source if no source is
specified.
Disallow joining source "0.0.0.0" as it is used to define an
any-source multicast group.
Signed-off-by: Liam McBirnie <liam.mcbirnie@boeing.com>
Original Idea is to display normal & detailed debugs when detailed
debug alone is configured. because of this "sh debugs" are showing
wrong Information, because same macro is used to disply the configured
debugs.
that means even if Normal debug is configured, detailed macro returns
TRUE. To avoid this ambiguity check whetehr detailed debug is configured
or not during dumping configured debugs. In all other places using
old macro.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
There has never been a `debug igmp trace detail` but we have
had code to display this when we had the appropriate flags
set. Since we never can accept this, let's remove this.
This showed up because of commit:0ab16492d2d9fcc6cba7e001227deed6765ed261
where we re-arranged some debugs to combine them being turned on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
