Just convert all uses of thread_cancel to THREAD_OFF. Additionally
use THREAD_ARG instead of t->arg to get the arguement. Individual
files should never be accessing thread private data like this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let's just use THREAD_OFF consistently in the code base
instead of each daemon having a special macro that needs to
be looked at and remembered what it does.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A new command is available under SAFI_MPLS_VPN:
With this command, the BGP vpnvx prefixes received are
not kept, if there are no VRF interested in importing
those vpn entries.
A soft refresh is performed if there is a change of
configuration: retain cmd, vrf import settings, or
route-map change.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
RFC 9234 mandates that role rules apply only to IPv4/IPv6 unicast bgp
sessions. If the OTC attribute appears in other sessions, it will remain
untouched.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
When using json output for `show bgp statistics json` gather the
number of prefixes of each prefix Length.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Antonio Quartulli <a@unstable.cc>
Start using mpls_lse_encode/mpls_lse_decode, that is endian-aware, because
we always use host-byte order, should use network-byte.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
in bgp_nlri_parse_ip there is a `sanity` check to ensure
that the prefix length as specified by the packet
will fit inside of a `struct prefix` correctly. The problem
here of course is that this is only v4 / v6 unicast/multicast
parsing and the bytes will never be more than 16, but we are copying
into a part of the struct prefix that is only 16 bytes, but with
this check the length may be up to 47 bytes( but not really possible ).
Limit the size check to at most 16 bytes (since we are only handling
v4 or v6 addresses here )
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The maxpaths same_clusterlen value was a uint16_t
with a single bit being used. No other values are
being stored. Let's remove the bitfield and simplify
to a bool.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The logic to unlock dest if iteration completed without iterating the
entire node was flawed. Specifically, if iteration terminated due to
`gr_deferred == 0` then the node would not get unlocked.
This change takes into account the fact that dest will be NULL only in
the case when the entire table was iterated and all nodes were already
unlocked. In any other case, it needs to be unlocked.
Signed-off-by: Carl Baldwin <carl@ecbaldwin.net>
Before:
```
spine1-debian-11(config-route-map)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
% Malformed communities attribute
```
After:
```
spine1-debian-11(config)# bgp community alias 65001:65001 test1
spine1-debian-11(config)# route-map rm permit 10
spine1-debian-11(config-route-map)# set community 65001:65001
spine1-debian-11(config-route-map)#
```
Same for large-communities.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When `all` is specified BGP pointer is always NULL, we need to iterate over
all instances separately.
```
Received signal 11 at 1648199394 (si_addr 0x30, PC 0x562e96597090); aborting...
/usr/local/lib/libfrr.so.0(zlog_backtrace_sigsafe+0x5e) [0x7f378a57ff6e]
/usr/local/lib/libfrr.so.0(zlog_signal+0xe6) [0x7f378a580146]
/usr/local/lib/libfrr.so.0(+0xcd4c2) [0x7f378a5aa4c2]
/lib/x86_64-linux-gnu/libpthread.so.0(+0x14140) [0x7f378a33e140]
/usr/lib/frr/bgpd(bgp_afi_safi_peer_exists+0) [0x562e96597090]
/usr/lib/frr/bgpd(+0x15c3b8) [0x562e9654a3b8]
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Commit: ea47320b1d
Modified the bgp_clear_stale_route function to have
better indentation, but in the process changed some
`continue;` statements to `break;` which modified
the looping and caused stale paths to not always be
removed upon an update.
To reproduce: A ---- B, setup with addpath and GR
One side has a prefix with nhop1 and nhop2, kill one
side and then resend the same prefix with nhop3,
paths nhop1 and 2 become stale and never removed.
Code inspection clearly shows that that `continue`
statements became `break` statements causing the
loop over all paths to stop prematurely.
The fix is to change the break back to continue
statements so the loop can continue instead of
stopping.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
