Added improved error message text to other places that could also
encounter the same condition. In testing found that in certain
case, duplicate error messages were previously issued. This fix
also removes the duplicates.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Problem reported due to tab completion showing all possible peers
in every vrf, but when neighbor in wrong vrf entered "no such
neighbor" is the error message. Making it slightly more clear
with "no such neighbor in the view/vrf" to clue the user that they
may have specified the wrong vrf.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Fix the code so that we would actually start receiving
RULE netlink notifications.
The Kernel expects the long long to be a bit field
value, while the newer netlink message types are
an enum. So we need to convert the message type
number to a bit position and set that value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Move where we check for non-kernel netlink messages to
a slightly earlier spot. This will allow in subsuquent
commits the removal of an extra parameter that needs to
be passed around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The BPF filter was an exclusion list of netlink messages
we did not want to receive from our self. The problem
with this is that the exclusion list was and will be
ever growing. So switch the test around to an inclusion
list since it is shorter and not growing. Right
now this is RTM_NEWADDR and RTM_DELADDR.
Change some of the debug messages to error messages
so that when something slips through and it is unexpected
during development we will see the problem.
Also try to improve the documentation about what
the filter is doing and leave some breadcrumbs for
future developers to know where to change code
when new functionality is added.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In case, the BGP or PBR daemon leaves, the PBR contexts created by this
daemon are flushed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Move the list_delete_and_null of the virt->vrfs code to
the actual deletion function to ensure proper lifecycle.
This assumption allows us to know that irt->vrfs is always
true so remove the NULL check on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The irt->vnis list was being freed on going down,
but actually delete it from the deletion function. Then
we can know that the irt->vnis is a valid list anywhere
we have a irt pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This option is only implemented by 4 daemons:
- BGPD
- RIPD
- RIPNGD
- Zebra
Manpages and documentation say that the option causes routes to not be
uninstalled from zebra when the daemon terminates. This is true for RIPD
and RIPNGD. This is not true for BGPD; in that daemon it only prevents
transmission of Cease / Peer Unconfig NOTIFICATION messages to peers.
Moreover, when any daemon disconnects from Zebra, all of its routes are
uninstalled from Zebra and the kernel regardless of this option,
rendering the option largely vestigial.
It is still useful in Zebra, where it prevents all routes from being
uninstalled when Zebra shuts down, so it is left there.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Functionality to let vtysh attempt to reconnect to daemons when
connection is lost (e.g. crash or restart).
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
Inter Area Prefix LSA ECMP is not working properly.
Two ABRs advertising IAP routes to backbone, not installed
with correct cost or if ABR restarted the route is removed
from backbone.
The current implementation ABR was not suppressing IAP update
for prefix cost is not better or route is not installed.
The better cost or path route was overwritten with non optimal
cost. This caused a loop with nexthops pointing each other
at backbone and non-backbone routers.
Consider to only send BEST/installed route's IAP notification
at ABRs.
When receiving IAP update from multiple ABRs, preserve multiple
advertising routers under the prefix route node.
Upon LSA maxage only remove the advertising route's which is
impacted and update route's nexthops and update FIB.
Testing Done:
Top to Bottom is part of area 0 on the Right, and
from Left side in area 1.
Top and Bottom act as ABRs.
H1 route is sent as Inter-Area Prefix to Right.
Trigger multiple triggers for ABR routes.
1) Shutting down link between, top to right to eliminate nhs
2) Restart frr at Top.
3) Restart frr at Right.
+-----------+
. |
,'| Top |`.
/ . | \
,' ,'+.----------+`. `.
/ / ` `. \ ',
,' ,' ,' \ `. .
- / ` `. ', `,
,` ,` ,' \ \ \
' - ` `. `, `,
+--------+ +--`--`--`--+ +---'---'--'+ +--------+
| | | | | | | |
| H1 ------ Left | | Right ------ H2 |
| | | | | | | |
+--------+ +-----------+ +----.--,-,-+ +--------+
`. ` \ - / /
\ `. ` ,' .` `
' . \ / / '
`. \ `. ` / ,'
\ ` . ,` / /
`. `. . / / /
\ . \ ,' ' /
' '--'--------+,'.`
`.| - /
' mid1 |/
| -
+-----------+
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This commit moves the command 'bgp enforce-first-as' from global BGP
instance configuration to peer/neighbor configuration, which can now be
changed by executing '[no] neighbor <neighbor> enforce-first-as'.
End users can now enforce sane first-AS checking on regular sessions
while e.g. disabling the checks on routeserver sessions, which usually
strip away their own AS number from the path.
To ensure backwards-compatibility, a migration routine was added which
automatically sets the 'enforce-first-as' flag on all configured
neighbors if the old global setting was activated. The old global
command immediately disappears after running the migration routine once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
There exists code paths where the rn was being used after free.
This eliminates these code paths.
Fixes: CM-21019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The linux kernel is getting the same Route Replace semantics
for v6 that v4 uses. Allow the end-user to know if their
kernel has this ability and if so to specify it so zebra
can take advantage of this.
Why not do auto-detection? Because you would have to write
code in zebra to add a route then add the same route again
with different nexthops to see if which semantics it is using.
It sure is easier to just add a cli that allows the user to
do it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Apparently Automake has some undocumented logic somewhere that makes it
so any Makefile generated from an Automake Makefile.am is removed from
its secret list of things to delete that it deletes when performing a
recursive distclean before actually performing the recursive distclean
and since the secret list is automatically generated from the list of
things that Autoconf should generate in configure.ac we can't remove the
Makefile from that list or it will break Automake's list of things to
automatically generate that it generates from Autoconf's list of things
to automatically generate.
Thus, to prevent Automake from deleting Makefiles and then immediately
trying to use the Makefiles it just deleted to delete said Makefiles, we
must remove ourselves from the secret list, which is accomplished by
changing the file extension to '.am' instead of '.in'.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
