Release Overview:
* Breaking changes
- Enable BGP dynamic capability by default for datacenter profile
- Split BGP `rpki cache` command into separate per SSH/TCP
- Add deprecation cycle for OSPF `router-info X [A.B.C.D]` command
* Features
- BGP dampening per-neighbor support
- BMP send-experimental stats
- Implement extended link-bandwidth for BGP
- Paths Limit for Multiple Paths in BGP
- New command for OSPFv2 `ip ospf neighbor-filter NAME [A.B.C.D]`
- Implement non-broadcast support for point-to-multipoint networks
* Other significant changes
bgpd
- Fix route leaking from the default l3vrf
- Fix `match peer` when switching between IPv4/IPv6/interface
- Fix dynamic peer graceful restart race condition
- Fix colored routes not installed after a switchover
- Fix crash when deleting the SRv6 locator
- Fix `no set as-path prepend ASNUM...`
- Fix negative commands for Graceful-Restart operations
- Fix ipv4-mapped ipv6 on non 6pe
- Fix show run of network route-distinguisher
- Fix display when using `missing-as-worst`
- Fix `show bgp neighbors` output
- Fix error handling for MP/GR capabilities as a dynamic capability
- Fix error handling when receiving BGP Prefix-SID attribute
- Fix route-target display with a dotted format
- Fix `no bgp as-path access-list`
- Fix `no` form for `neighbor X capability software-version`
- Check against extended community unit size for link bandwidth
- Make sure we have enough data to handle extended link bandwidth
- Check if FQDN capability length is in valid ranges
- Allow using different ASNs per VRF instances
- Send End-of-RIB not only if Graceful-Restart capability is received
- Implement backpressure to avoid CPU hog
- Ignore validating the attribute flags if path-attribute is configured
- Prevent deletion of BGP peer groups associated with `bgp listen range`
- Inherit some peer flags from the peer-group
- Allow specification of AS 0 for RPKI commands
- Allow using `maximum-prefix` for EVPN
- Increase install/uninstall speed of EVPN VNIs
- Update default-originate route-map actual map structure
- Include `unsuppress-map` as a valid outgoing eBGP policy
- Allow dynamically disable graceful-restart/long-lived graceful-restart
- Unset advertised capabilities if the capability is disabled
- Aggregated summary-only remove suppressed from EVPN
isisd
- Fix crash when deactivating ISIS adjacency on the interface
- Fix `show isis database [detail] json`
- Fix `show isis algorithm`
- Fix crash when configuring the circuit type for the interface
- Fix IP/IPv6 reachability TLVs
- When the metric-type is configured as "wide", the IS-IS generates
incorrect metric values for IPv4 directly connected routes
- Add link state support for SRv6 adjacencies
- The hold time of hello packets on a P2P link does not match the
sending interval
mgmtd
- Implement YANG RPC/action support
ospfd
- Fix crash in OSPF TE parsing
- Fix the bug where ip_ospf_dead-interval_minimal_hello-multiplier did
not reset the hello timer
- Fix `no write-multiplier` command
- Fix `no maximum-paths` command
- Solved crash in RI parsing with OSPF TE
- Assure OSPF AS External routes are installed after the link flap
- Send LS Updates in response to LS Request as unicast
ospf6d
- Handle topo change in Graceful-Restart Helper mode for max-age LSAs
- Prevent heap-buffer-overflow with an unknown type
- Redistribute metric for AS-external route
- Fix next-hop computation for inter-area multi-ABR ECMP
- Fix interface type vs. connected routes updates
pathd
- Retry synchronous label-manager ZAPI connection
pimd
- Fix null register before aging out reg-stop
- Fix dr-priority range
- Fix crash unconfiguring rp keepalive timer
lib
- Fix keychain NB crash
- Do not convert EVPN prefixes into IPv4/IPv6 if not needed
ripd
- Fix `clear ip rip` command
ripngd
- Fix `clear ipv6 ripng` command
tools
- Handle seq num for BGP as-path in frr-reload.py
vtysh
- Fix 'show ip[v6] prefix-list ... json' formatting by moving it to vtysh
- Fix `show route-map` command when calling via `do`
- Show `ip ospf network ...` even if it's not the same as the interface type
zebra
- Fix `mpls label bind` command
- Fix excessive `exit` commands
- Fix static SRv6 segment-list SID order
- Fix JSON output for `show route summary json`
- Fix malformed json output for multiple vrfs in command
`show ip route vrf all json`
- Fix crash if MAC-VLAN link in another netns
- Fix crash on MAC-VLAN link down/up
- Deny the routes if ip protocol CLI refers to an undefined route-map
- Bridge flap handle VLAN membership update
- Add `show fpm status [json]` command
Fixes the crash:
```
(gdb) bt
0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=124583315603008) at ./nptl/pthread_kill.c:44
1 __pthread_kill_internal (signo=11, threadid=124583315603008) at ./nptl/pthread_kill.c:78
2 __GI___pthread_kill (threadid=124583315603008, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
3 0x0000714ed0242476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
4 0x0000714ed074cfb7 in core_handler (signo=11, siginfo=0x7ffe6d9792b0, context=0x7ffe6d979180) at lib/sigevent.c:258
5 <signal handler called>
6 0x000060f55e33ffdd in route_table_get_info (table=0x0) at ./lib/table.h:177
7 0x000060f55e340053 in bgp_dest_table (dest=0x60f56dabb840) at ./bgpd/bgp_table.h:156
8 0x000060f55e340c9f in is_route_injectable_into_vpn (pi=0x60f56dbc4a60) at ./bgpd/bgp_mplsvpn.h:331
9 0x000060f55e34507c in vpn_leak_from_vrf_update (to_bgp=0x60f56da52070, from_bgp=0x60f56da75af0, path_vrf=0x60f56dbc4a60) at bgpd/bgp_mplsvpn.c:1575
10 0x000060f55e346657 in vpn_leak_from_vrf_update_all (to_bgp=0x60f56da52070, from_bgp=0x60f56da75af0, afi=AFI_IP) at bgpd/bgp_mplsvpn.c:2028
11 0x000060f55e340c10 in vpn_leak_postchange (direction=BGP_VPN_POLICY_DIR_TOVPN, afi=AFI_IP, bgp_vpn=0x60f56da52070, bgp_vrf=0x60f56da75af0) at ./bgpd/bgp_mplsvpn.h:310
12 0x000060f55e34a692 in vpn_leak_postchange_all () at bgpd/bgp_mplsvpn.c:3737
13 0x000060f55e3d91fc in router_bgp (self=0x60f55e5cbc20 <router_bgp_cmd>, vty=0x60f56e2d7660, argc=3, argv=0x60f56da19830) at bgpd/bgp_vty.c:1601
14 0x0000714ed069ddf5 in cmd_execute_command_real (vline=0x60f56da32a80, vty=0x60f56e2d7660, cmd=0x0, up_level=0) at lib/command.c:1002
15 0x0000714ed069df6e in cmd_execute_command (vline=0x60f56da32a80, vty=0x60f56e2d7660, cmd=0x0, vtysh=0) at lib/command.c:1061
16 0x0000714ed069e51e in cmd_execute (vty=0x60f56e2d7660, cmd=0x60f56dbf07d0 "router bgp 100\n", matched=0x0, vtysh=0) at lib/command.c:1227
17 0x0000714ed076faa0 in vty_command (vty=0x60f56e2d7660, buf=0x60f56dbf07d0 "router bgp 100\n") at lib/vty.c:616
18 0x0000714ed07719c4 in vty_execute (vty=0x60f56e2d7660) at lib/vty.c:1379
19 0x0000714ed07740f0 in vtysh_read (thread=0x7ffe6d97c700) at lib/vty.c:2374
20 0x0000714ed07685c4 in event_call (thread=0x7ffe6d97c700) at lib/event.c:1995
21 0x0000714ed06e3351 in frr_run (master=0x60f56d1d2e40) at lib/libfrr.c:1232
22 0x000060f55e2c4b44 in main (argc=7, argv=0x7ffe6d97c978) at bgpd/bgp_main.c:555
(gdb)
```
Fixes https://github.com/FRRouting/frr/issues/16484
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 04f9372409)
In scaled EVPN + ipv4/ipv6 uni route sync to zebra,
some of the ipv4/ipv6 routes skipped reinstallation
due to incorrect local variable's stale value.
Once the local variable value reset in each loop
iteration all skipped routes synced to zebra properly.
Ticket: #3948828
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The return value of evpn_route_select_install is ignored in all cases
except during vni route table install/uninstall and based on the
returned value, an error is logged. Fixing this.
Ticket :#3992392
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
The code is clearly incorrect. After consultation with
the original author this is the decided change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit c4b4c242ec)
Correct FRR startup counts on a daemon's vty socket to be open when the
parent process exits. The parent process waits for `frr_check_detach()`
to be called by the child before exiting. The problem is when the
`FRR_MANUAL_VTY_START` flag is set the vty socket was not opened but
`frr_check_detach()` was called anyway.
Instead add a bool option for `frr_check_detach()` to be called when the
socket is opened with `frr_vty_serv_start()`, and do so when "manually"
calling said function (i.e., when FRR_MANUAL_VTY_START is set).
The `FRR_MANUAL_VTY_START` flag is only set by mgmtd. The reason we
wait to open the vty socket is so that mgmtd can parse the various
daemon specific config files it has taken over, after the event loop has
started, but before we receive any possible new config from `vtysh`.
fixes#16362
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit be9a6fc0ea)
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!
https://github.com/FRRouting/frr/issues/16375
Signed-off-by: Christian Breunig <christian@breunig.cc>
(cherry picked from commit 5a70378a47)
Current code when a link is set down is to just mark the
nexthop group as not properly setup. Leaving situations
where when an interface goes down and show output is
entered we see incorrect state. This is true for anything
that would be checking those flags at that point in time.
Modify the interface down nexthop group code to notice the
nexthops appropriately ( and I mean set the appropriate flags )
and to allow a `show ip route` command to actually display
what is going on with the nexthops.
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:06 ago
* 192.168.44.33, via dummy1, weight 1
* 192.168.45.33, via dummy2, weight 1
sharpd@eva:~/frr1$ sudo ip link set dummy2 down
eva# show ip route 1.0.0.0
Routing entry for 1.0.0.0/32
Known via "sharp", distance 150, metric 0, best
Last update 00:00:12 ago
* 192.168.44.33, via dummy1, weight 1
192.168.45.33, via dummy2 inactive, weight 1
Notice now that the 1.0.0.0/32 route now correctly
displays the route for the nexthop group entry.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit 266b061994)
Coverity complains there is a use after free (1598495 and 1598496)
At this point, most likely dest->refcount cannot go 1 and free up
the dest, but there might be some code path where this can happen.
Fixing this with a simple order change (no harm fix).
Ticket :#4001204
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
(cherry picked from commit 40965e5999)
Fix the following crash when pim options are (un)configured on an
non-existent interface.
> r1(config)# int fgljdsf
> r1(config-if)# no ip pim unicast-bsm
> vtysh: error reading from pimd: Connection reset by peer (104)Warning: closing connection to pimd because of an I/O error!
> #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50
> #1 0x00007f70c8f32249 in core_handler (signo=11, siginfo=0x7fffff88e4f0, context=0x7fffff88e3c0) at lib/sigevent.c:258
> #2 <signal handler called>
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> #4 0x00007f70c8efdcb5 in nb_callback_modify (context=0x556d00032b60, nb_node=0x556cffeeb9b0, event=NB_EV_APPLY, dnode=0x556d00031670, resource=0x556d00032b48, errmsg=0x7fffff88f710 "", errmsg_len=8192)
> at lib/northbound.c:1538
> #5 0x00007f70c8efe949 in nb_callback_configuration (context=0x556d00032b60, event=NB_EV_APPLY, change=0x556d00032b10, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1888
> #6 0x00007f70c8efee82 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x556d00032b60, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:2016
> #7 0x00007f70c8efd658 in nb_candidate_commit_apply (transaction=0x556d00032b60, save_transaction=true, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1356
> #8 0x00007f70c8efd78e in nb_candidate_commit (context=..., candidate=0x556cffeb0e80, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1389
> #9 0x00007f70c8f03e58 in nb_cli_classic_commit (vty=0x556d00025a80) at lib/northbound_cli.c:51
> #10 0x00007f70c8f043f8 in nb_cli_apply_changes_internal (vty=0x556d00025a80,
> xpath_base=0x7fffff893bb0 "/frr-interface:lib/interface[name='fgljdsf']/frr-pim:pim/address-family[address-family='frr-routing:ipv4']", clear_pending=false) at lib/northbound_cli.c:178
> #11 0x00007f70c8f0475d in nb_cli_apply_changes (vty=0x556d00025a80, xpath_base_fmt=0x556cfdde9fe0 "./frr-pim:pim/address-family[address-family='%s']") at lib/northbound_cli.c:234
> #12 0x0000556cfdd8298f in pim_process_no_unicast_bsm_cmd (vty=0x556d00025a80) at pimd/pim_cmd_common.c:3493
> #13 0x0000556cfddcf782 in no_ip_pim_ucast_bsm (self=0x556cfde40b20 <no_ip_pim_ucast_bsm_cmd>, vty=0x556d00025a80, argc=4, argv=0x556d00031500) at pimd/pim_cmd.c:4950
> #14 0x00007f70c8e942f0 in cmd_execute_command_real (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, up_level=0) at lib/command.c:1002
> #15 0x00007f70c8e94451 in cmd_execute_command (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, vtysh=0) at lib/command.c:1061
> #16 0x00007f70c8e9499f in cmd_execute (vty=0x556d00025a80, cmd=0x556d00030320 "no ip pim unicast-bsm", matched=0x0, vtysh=0) at lib/command.c:1227
> #17 0x00007f70c8f51e44 in vty_command (vty=0x556d00025a80, buf=0x556d00030320 "no ip pim unicast-bsm") at lib/vty.c:616
> #18 0x00007f70c8f53bdd in vty_execute (vty=0x556d00025a80) at lib/vty.c:1379
> #19 0x00007f70c8f55d59 in vtysh_read (thread=0x7fffff896600) at lib/vty.c:2374
> #20 0x00007f70c8f4b209 in event_call (thread=0x7fffff896600) at lib/event.c:2011
> #21 0x00007f70c8ed109e in frr_run (master=0x556cffdb4ea0) at lib/libfrr.c:1217
> #22 0x0000556cfdddec12 in main (argc=2, argv=0x7fffff896828, envp=0x7fffff896840) at pimd/pim_main.c:165
> (gdb) f 3
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> 1910 pim_ifp->ucast_bsm_accept =
> (gdb) list
> 1905 case NB_EV_ABORT:
> 1906 break;
> 1907 case NB_EV_APPLY:
> 1908 ifp = nb_running_get_entry(args->dnode, NULL, true);
> 1909 pim_ifp = ifp->info;
> 1910 pim_ifp->ucast_bsm_accept =
> 1911 yang_dnode_get_bool(args->dnode, NULL);
> 1912
> 1913 break;
> 1914 }
> (gdb) p pim_ifp
> $1 = (struct pim_interface *) 0x0
Fixes: 3bb513c399 ("lib: adapt to version 2 of libyang")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6952bea5cd)
Additionally, print `errmsg_if_any` in successful debug messages
if non-NULL.
fixes#16386#16043
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit 7afd7d99f2)
In case of imported routes (L3vni/vrf leaks), when a bgp instance is
being deleted, the peer->bgp comparision with the incoming bgp to remove
the dest from the pending fifo is wrong. This can lead to the fifo
having stale entries resulting in crash.
Two changes are done here.
- Instead of pop/push items in list if the struct bgp doesnt match,
simply iterate the list and remove the expected ones.
- Corrected the way bgp is fetched from dest rather than relying on
path_info->peer so that it works for all kinds of routes.
Ticket :#3980988
Signed-off-by: Chirag Shah <chirag @nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
(cherry picked from commit 4395fcd8e1)
Auto created VRF instances does not have any config, so it's not relevant
depending on them.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit bfedb38110)
When using e.g. `adverise-all-vni`, and/or `import vrf ...`, the VRF instance
is created with a default's VRF ASN and tagged as AUTO_VRF. We MUST skip them
here also.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 03c086866b)
If we create a new BGP instance (in this case VRF instance), it MUST be marked
as auto created, to avoid bgpd changing VRF instance's ASN to the default VRF's.
That's because of the ordering when FRR reload is happening.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 80a4f87c9a)
1. When the root IS regenerates an LSP, it calls lsp_build() -> lsp_clear_data() to free the TLV memory of the first fragment and all other fragments. If the number of fragments in the regenerated LSP decreases or if no fragmentation is needed, the extra LSP fragments are not immediately deleted. Instead, lsp_seqno_update() -> lsp_purge() is called to set the remaining time to zero and start aging, while also notifying other IS nodes to age these fragments. lsp_purge() usually does not reset lsp->hdr.seqno to zero because the LSP might recover during the aging process.
2. When other IS nodes receive an LSP, they always call process_lsp() -> isis_unpack_tlvs() to allocate TLV memory for the LSP. This does not differentiate whether the received LSP has a remaining lifetime of zero. Therefore, it is rare for an LSP of a non-root IS to have empty TLVs. Of course, if an LSP with a remaining time of zero and already corrupted is received, lsp_update() -> lsp_purge() will be called to free the TLV memory of the LSP, but this scenario is rare.
3. In LFA calculations, neighbors of the root IS are traversed, and each neighbor is taken as a new root to compute the neighbor SPT. During this process, the old root IS will serve as a neighbor of the new root IS, triggering a call to isis_spf_process_lsp() to parse the LSP of the old root IS and obtain its IP vertices and neighboring IS vertices. However, isis_spf_process_lsp() only checks whether the TLVs in the first fragment of the LSP exist, and does not check the TLVs in the fragmented LSP. If the TLV memory of the fragmented LSP of the old root IS has been freed, it can lead to a null pointer access, causing the current crash.
Additionally, for the base SPT, there are only two places where the LSP of the root IS is parsed:
1. When obtaining the UP neighbors of the root IS via spf_adj_list_parse_lsp().
2. When preloading the IP vertices of the root IS via isis_lsp_iterate_ip_reach().
Both of these checks ensure that frag->tlvs is not null, and they do not subsequently call isis_spf_process_lsp() to parse the root IS's LSP. It is very rare for non-root IS LSPs to have empty TLVs unless they are corrupted LSPs awaiting deletion. If it happens, a crash will occur.
The backtrace is as follows:
(gdb) bt
#0 0x00007f3097281fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
#1 0x00007f30973a2972 in core_handler (signo=11, siginfo=0x7ffce66c2870, context=0x7ffce66c2740) at ../lib/sigevent.c:261
#2 <signal handler called>
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
#4 0x000055dfa805743b in isis_spf_loop (spftree=0x55dfa950eee0, root_sysid=0x55dfa950ef6c "") at ../isisd/isis_spf.c:1688
#5 0x000055dfa805784f in isis_run_spf (spftree=0x55dfa950eee0) at ../isisd/isis_spf.c:1808
#6 0x000055dfa8037ff5 in isis_spf_run_neighbors (spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:1259
#7 0x000055dfa803ac17 in isis_spf_run_lfa (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:2300
#8 0x000055dfa8057964 in isis_run_spf_with_protection (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_spf.c:1827
#9 0x000055dfa8057c15 in isis_run_spf_cb (thread=0x7ffce66c38e0) at ../isisd/isis_spf.c:1889
#10 0x00007f30973bbf04 in thread_call (thread=0x7ffce66c38e0) at ../lib/thread.c:1990
#11 0x00007f309735497b in frr_run (master=0x55dfa91733c0) at ../lib/libfrr.c:1198
#12 0x000055dfa8029d5d in main (argc=5, argv=0x7ffce66c3b08, envp=0x7ffce66c3b38) at ../isisd/isis_main.c:273
(gdb) f 3
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
898 ../isisd/isis_spf.c: No such file or directory.
(gdb) p te_neighs
$1 = (struct isis_item_list *) 0x120
(gdb) p lsp->tlvs
$2 = (struct isis_tlvs *) 0x0
(gdb) p lsp->hdr
$3 = {pdu_len = 27, rem_lifetime = 0, lsp_id = "\000\000\000\000\000\001\000\001", seqno = 4, checksum = 59918, lsp_bits = 1 '\001'}
The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well.
I have reviewed the process for calculating the SPT based on the LSP, and isis_spf_process_lsp() is the only function that does not check whether the TLVs in the fragments are empty. Therefore, I believe that modifying this function alone should be sufficient. If the TLVs of the current fragment are already empty, we do not need to continue processing subsequent fragments. This is consistent with the behavior where we do not process fragments if the TLVs of the first fragment are empty.
Of course, one could argue that lsp_purge() should still retain the TLV memory, freeing it and then reallocating it if needed. However, this is a debatable point because in some scenarios, it is permissible for the LSP to have empty TLVs. For example, after receiving an SNP (Sequence Number PDU) message, an empty LSP (with lsp->hdr.seqno = 0) might be created by calling lsp_new. If the corresponding LSP message is discarded due to domain or area authentication failure, the TLV memory wouldn't be allocated.
Test scenario:
In an LFA network, importing a sufficient number of static routes to cause LSP fragmentation, and then rolling back the imported static routes so that the LSP is no longer fragmented, can easily result in this issue.
Signed-off-by: zhou-run <zhou.run@h3c.com>
(cherry picked from commit e905177a8c)
Use `vtysh` with this input file:
```
ip route A nh1
ip route A nh2
ip route B nh1
ip route B nh2
```
When running "ip route B" with "nh1" and "nh2", the procedure maybe is:
1) Create the two nexthops: "nh1" and "nh2".
2) Register "nh1" with `static_zebra_nht_register()`, then the states of both
"nh1" and "nht2" are set to "STATIC_SENT_TO_ZEBRA".
3) Register "nh2" with `static_zebra_nht_register()`, then only the routes with
nexthop of "STATIC_START" will be sent to zebra.
So, send the routes with the nexthop of "STATIC_SENT_TO_ZEBRA" to zebra.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 4518d386f7)
During internal testing, when the following sequence is followed, two
non default vrfs end up pointing to the same table-id
- Initially vrf201 has table id 1002
- ip link add dev vrf202 type vrf table 1002
- ip link set dev vrf202 up
- ip link set dev <intrerface> master vrf202
This will ideally lead to zebra exit since this is a misconfiguration as
expected.
However if we perform a restart frr.service at this point, we end up
having two vrfs pointing to same table-id and bad things can happen.
This is because in the interface_vrf_change, we incorrectly check for
vrf_lookup_by_id() to evaluate if there is a misconfig. This works well
for a non restart case but not for the startup case.
root@mlx-3700-20:mgmt:/var/log/frr# sudo vtysh -c "sh vrf"
vrf mgmt id 37 table 1001
vrf vrf201 id 46 table 1002
vrf vrf202 id 59 table 1002 >>>>
Fix: in all cases of misconfiguration, exit zebra as expected.
Ticket :#3970414
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
(cherry picked from commit c77e15710d)
In linux networking stack, the received mpls packets will be processed
by the host *twice*, one as mpls packet, the other as ip packet, so
its ttl decreased 1.
So, we need release the `IP_MINTTL` value if gtsm is enabled, it is for the
mpls packets of neighbor session caused by the command:
`label local advertise explicit-null`.
This change makes the gtsm mechanism a bit deviation.
Fix PR #8313
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 1919df3a64)
When a neighbor connection is disconnected, it may trigger LSP re-generation as a timer task, but this process may be delayed. As a result, the list of neighbors in area->adjacency_list may be inconsistent with the neighbors in lsp->tlvs->oldstyle_reach/extended_reach. For example, the area->adjacency_list may lack certain neighbors even though they are present in the LSP. When computing SPF, the call to isis_spf_build_adj_list() generates the spftree->sadj_list, which reflects the real neighbors in the area->adjacency_list. However, in the case of LAN links, spftree->sadj_list may include additional pseudo neighbors.
The pre-loading of tents through the call to isis_spf_preload_tent involves two steps:
1. isis_spf_process_lsp() is called to generate real neighbor vertices based on the root LSP and pseudo LSP.
2. isis_spf_add_local() is called to add corresponding next hops to the vertex->Adj_N list for the real neighbor vertices.
In the case of LAN links, the absence of corresponding real neighbors in the spftree->sadj_list prevents the execution of the second step. Consequently, the vertex->Adj_N list for the real neighbor vertices lacks corresponding next hops. This leads to a null pointer access when isis_lfa_compute() is called to calculate LFA.
As for P2P links, since there are no pseudo neighbors, only the second step is executed, which does not create real neighbor vertices and therefore does not encounter this issue.
The backtrace is as follows:
(gdb) bt
#0 0x00007fd065277fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
#1 0x00007fd065398972 in core_handler (signo=11, siginfo=0x7ffc5c0636b0, context=0x7ffc5c063580) at ../lib/sigevent.c:261
#2 <signal handler called>
#3 0x00005564d82f8408 in isis_lfa_compute (area=0x5564d8b143f0, circuit=0x5564d8b21d10, spftree=0x5564d8b06bf0, resource=0x7ffc5c064410) at ../isisd/isis_lfa.c:2134
#4 0x00005564d82f8d78 in isis_spf_run_lfa (area=0x5564d8b143f0, spftree=0x5564d8b06bf0) at ../isisd/isis_lfa.c:2344
#5 0x00005564d8315964 in isis_run_spf_with_protection (area=0x5564d8b143f0, spftree=0x5564d8b06bf0) at ../isisd/isis_spf.c:1827
#6 0x00005564d8315c15 in isis_run_spf_cb (thread=0x7ffc5c064590) at ../isisd/isis_spf.c:1889
#7 0x00007fd0653b1f04 in thread_call (thread=0x7ffc5c064590) at ../lib/thread.c:1990
#8 0x00007fd06534a97b in frr_run (master=0x5564d88103c0) at ../lib/libfrr.c:1198
#9 0x00005564d82e7d5d in main (argc=5, argv=0x7ffc5c0647b8, envp=0x7ffc5c0647e8) at ../isisd/isis_main.c:273
(gdb) f 3
#3 0x00005564d82f8408 in isis_lfa_compute (area=0x5564d8b143f0, circuit=0x5564d8b21d10, spftree=0x5564d8b06bf0, resource=0x7ffc5c064410) at ../isisd/isis_lfa.c:2134
2134 ../isisd/isis_lfa.c: No such file or directory.
(gdb) p vadj_primary
$1 = (struct isis_vertex_adj *) 0x0
(gdb) p vertex->Adj_N->head
$2 = (struct listnode *) 0x0
(gdb) p (struct isis_vertex *)spftree->paths->l.list->head->next->next->next->next->data
$8 = (struct isis_vertex *) 0x5564d8b5b240
(gdb) p $8->type
$9 = VTYPE_NONPSEUDO_TE_IS
(gdb) p $8->N.id
$10 = "\000\000\000\000\000\002"
(gdb) p $8->Adj_N->count
$11 = 0
(gdb) p (struct isis_vertex *)spftree->paths->l.list->head->next->next->next->next->next->data
$12 = (struct isis_vertex *) 0x5564d8b73dd0
(gdb) p $12->type
$13 = VTYPE_NONPSEUDO_TE_IS
(gdb) p $12->N.id
$14 = "\000\000\000\000\000\003"
(gdb) p $12->Adj_N->count
$15 = 0
(gdb) p area->adjacency_list->count
$16 = 0
The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well.
The scenario where a vertex has no next hop is normal. For example, the "clear isis neighbor" command invokes isis_vertex_adj_del() to delete the next hop of a vertex. Upon reviewing all the instances where the vertex->Adj_N list is used, I found that only isis_lfa_compute() lacks a null check. Therefore, I believe that modifying this part will be sufficient. Additionally, the vertex->parents list for IP vertices is guaranteed not to be empty.
Test scenario:
Setting up LFA for LAN links and executing the "clear isis neighbor" command easily reproduces the issue.
Signed-off-by: zhou-run <zhou.run@h3c.com>
(cherry picked from commit a970bb51b5)
