If the pimreg device exists but it has not been set to the pim->pimreg pointer we can have
a crash. Just prevent the crash since it's some sort of startup / re-org the network
issue.
(gdb) bt
0 0x00007f0485b035cb in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
1 0x00007f0485c0fbec in core_handler (signo=6, siginfo=0x7ffdc0198030, context=<optimized out>) at lib/sigevent.c:264
2 <signal handler called>
3 0x00007f04859668eb in raise () from /lib/x86_64-linux-gnu/libc.so.6
4 0x00007f0485951535 in abort () from /lib/x86_64-linux-gnu/libc.so.6
5 0x00007f0485c3af76 in _zlog_assert_failed (xref=xref@entry=0x55692269b940 <_xref.23164>, extra=extra@entry=0x0) at lib/zlog.c:680
6 0x00005569226150d0 in pim_if_new (ifp=0x556922c82900, gm=gm@entry=false, pim=pim@entry=false, ispimreg=ispimreg@entry=true,
is_vxlan_term=is_vxlan_term@entry=false) at pimd/pim_iface.c:124
7 0x0000556922615140 in pim_if_create_pimreg (pim=pim@entry=0x556922cc11e0) at pimd/pim_iface.c:1549
8 0x0000556922616bc8 in pim_if_create_pimreg (pim=0x556922cc11e0) at pimd/pim_iface.c:1613
9 pim_ifp_create (ifp=0x556922cc0e70) at pimd/pim_iface.c:1641
10 0x00007f0485c32cf9 in zclient_interface_add (cmd=<optimized out>, zclient=<optimized out>, length=<optimized out>, vrf_id=77) at lib/zclient.c:2214
11 0x00007f0485c3346a in zclient_read (thread=<optimized out>) at lib/zclient.c:4003
12 0x00007f0485c215ed in thread_call (thread=thread@entry=0x7ffdc0198880) at lib/thread.c:2008
13 0x00007f0485bdbbc8 in frr_run (master=0x556922a10470) at lib/libfrr.c:1223
14 0x000055692260312b in main (argc=<optimized out>, argv=0x7ffdc0198b98, envp=<optimized out>) at pimd/pim_main.c:176
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The BGP path info debugging information should dump the
real peer information for imported prefixes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The bgp_path_info_cmp() function needs to get the peer of
imported prefixes in many parts of the algorithm. Use two
local variables to get the original peer either for vpn
imported prefixes or from standard prefixes.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Topology:
RP---FHR---Source
Problem Statement:
1. In FHR, Enable PIM and IGMP on source connected interface
2. Start multicast traffic. (s,g) mroute and upstream will be created as expected.
3. Disable PIM on source connected interface.
4. Disable IGMP on source connected interface.
5. Stop the traffic.
Mroute will never get timeout.
Root Cause:
In FHR, when PIMD receive multicast data packet on
source connected interface which is IGMP enabled, but PIM
not enabled. PIMD process the packet, install the
mroute and start the KAT timer.
Fix:
Don't process multicast data packet received on PIM disabled
Signed-off-by: Sarita Patra <saritap@vmware.com>
After we call subgroup_announce_check(), we leave communities, large-communities
that are modified by route-maps uninterned, and here we have a memory leak.
```
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323:Direct leak of 80 byte(s) in 2 object(s) allocated from:
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #0 0x7f0858d90037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #1 0x7f08589b15b2 in qcalloc lib/memory.c:105
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #2 0x561f5c4e08d2 in lcommunity_new bgpd/bgp_lcommunity.c:28
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #3 0x561f5c4e11d9 in lcommunity_dup bgpd/bgp_lcommunity.c:141
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #4 0x561f5c5c3b8b in route_set_lcommunity bgpd/bgp_routemap.c:2491
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #5 0x7f0858a177a5 in route_map_apply_ext lib/routemap.c:2675
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #6 0x561f5c5696f9 in subgroup_announce_check bgpd/bgp_route.c:2352
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #7 0x561f5c5fb728 in subgroup_announce_table bgpd/bgp_updgrp_adv.c:682
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #8 0x561f5c5fbd95 in subgroup_announce_route bgpd/bgp_updgrp_adv.c:765
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #9 0x561f5c5f6105 in peer_af_announce_route bgpd/bgp_updgrp.c:2187
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #10 0x561f5c5790be in bgp_announce_route_timer_expired bgpd/bgp_route.c:5032
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #11 0x7f0858a76e4e in thread_call lib/thread.c:1991
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #12 0x7f0858974c24 in frr_run lib/libfrr.c:1185
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #13 0x561f5c3e955d in main bgpd/bgp_main.c:505
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #14 0x7f08583a9d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323-
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323:Indirect leak of 144 byte(s) in 2 object(s) allocated from:
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #0 0x7f0858d8fe8f in __interceptor_malloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:145
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #1 0x7f08589b1579 in qmalloc lib/memory.c:100
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #2 0x561f5c4e1282 in lcommunity_dup bgpd/bgp_lcommunity.c:144
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #3 0x561f5c5c3b8b in route_set_lcommunity bgpd/bgp_routemap.c:2491
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #4 0x7f0858a177a5 in route_map_apply_ext lib/routemap.c:2675
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #5 0x561f5c5696f9 in subgroup_announce_check bgpd/bgp_route.c:2352
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #6 0x561f5c5fb728 in subgroup_announce_table bgpd/bgp_updgrp_adv.c:682
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #7 0x561f5c5fbd95 in subgroup_announce_route bgpd/bgp_updgrp_adv.c:765
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #8 0x561f5c5f6105 in peer_af_announce_route bgpd/bgp_updgrp.c:2187
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #9 0x561f5c5790be in bgp_announce_route_timer_expired bgpd/bgp_route.c:5032
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #10 0x7f0858a76e4e in thread_call lib/thread.c:1991
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #11 0x7f0858974c24 in frr_run lib/libfrr.c:1185
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #12 0x561f5c3e955d in main bgpd/bgp_main.c:505
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323- #13 0x7f08583a9d09 in __libc_start_main ../csu/libc-start.c:308
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323-
./bgp_large_community.test_bgp_large_community_topo_2/r1.bgpd.asan.2465323-SUMMARY: AddressSanitizer: 224 byte(s) leaked in 4 allocation(s).
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Topology:
=========
RP---FHR<ens224>---Source
Problem Statement:
=================
Step 1:
Enable PIM and IGMP on source connected interface ens224
Step 2:
Start multicast traffic. (s,g) mroute and upstream will be created as expected.
dev# show ip mroute
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned
R - SGRpt Pruned, F - Register flag, T - SPT-bit for SSM FHR
Source Group Flags Proto Input Output TTL Uptime
50.0.0.4 225.1.1.1 SF PIM ens224 pimreg 1 00:37:55
dev# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
ens224 50.0.0.4 225.1.1.1 NotJ,RegJ 00:37:57 --:--:-- --:--:-- 00:02:43 1
Step 3:
Disable PIM on source connected interafce ens224
dev# show ip mroute
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned
R - SGRpt Pruned, F - Register flag, T - SPT-bit for SSM FHR
Source Group Flags Proto Input Output TTL Uptime
50.0.0.4 225.1.1.1 SF PIM ens224 pimreg 1 00:38:05
dev# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
ens224 50.0.0.4 225.1.1.1 NotJ,RegJ 00:38:08 --:--:-- --:--:-- 00:02:32 1
Step 4:
Disable IGMP on source connected interface ens224
dev# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
ens224 50.0.0.4 225.1.1.1 NotJ,RegJ 00:38:15 --:--:-- --:--:-- 00:03:27 1
dev# show ip mroute
IP Multicast Routing Table
Flags: S - Sparse, C - Connected, P - Pruned
R - SGRpt Pruned, F - Register flag, T - SPT-bit for SSM FHR
Source Group Flags Proto Input Output TTL Uptime
50.0.0.4 225.1.1.1 SF PIM <iif?> pimreg 1 00:38:18
Pim upstream IIF is still pointing towards the source connected
interface which is not pim enabled and not IGMP enabled and
Mroute is still present in the kernel and KAT timer is still running
on the interface, where ifp->info is already set to NULL.
This leads to crash.
Root Cause:
==========
When "no ip pim" commands get executed on source connected interface,
we are updating upstream IIF only when IGMP is not enabled on the same
interface.
Fix:
===
When PIM is disabled on source connected interface, update upstream IIF
no matter if IGMP is enabled or not on the same interface.
Issue: #12848
Issue: #10782
Signed-off-by: Sarita Patra <saritap@vmware.com>
This test ensures that BGP VRF instance is able to import ECMP
paths, and is able to install 2 labelled routes accordingly.
The test also ensures that the imported 172.31.0.10/32 prefix
is selected and that the reason why the 172.31.0.10/32 prefix is
selected is not 'Locally configured route'. Actually, imported
routes do not figure out correctly the peer, and the reason is
falsely mentioned as local.
This test also uses IP ranges used for documentation and for
testing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Until now, when calculating the bgp bestpath route, the peer
comparison could not be performed for imported prefixes, as
the peer origin could not be retrieved. As consequence, the
reason why a given prefix as chosen was wrong: "Locally
configured route" was the main reason, whereas the prefix
was imported from a remote peer.
Fix this by searching for the real peer.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Before fix:
==========
frr# show ipv6 mld interface
Interface State V Querier Timer Uptime
ens224 up 1 fe80::250:56ff:feb7:a7e3 query 00:00:24.219 00:00:07.031
After fix:
=========
frr(config-if)# do show ipv6 mld interface
Interface State Address V Querier QuerierIp Query Timer Uptime
ens224 up fe80::250:56ff:feb7:a7e3 1 local fe80::250:56ff:feb7:a7e3 00:01:22.263 00:08:00.237
Issue: #11241
Signed-off-by: Sarita Patra <saritap@vmware.com>
We should not display down interfaces or MLD disabled interfaces in
"show ipv6 mld interface" command.
Before fix:
==========
frr# show ipv6 mld interface
Interface State V Querier Timer Uptime
ens192 up 2 fe80::250:56ff:feb7:d04 query 00:00:25.432 00:00:07.038
ens224 up 1 fe80::250:56ff:feb7:a7e3 query 00:00:24.219 00:00:07.031
pim6reg down
After fix:
=========
frr# show ipv6 mld interface
Interface State V Querier Timer Uptime
ens192 up 2 fe80::250:56ff:feb7:d04 query 00:00:25.432 00:00:07.038
ens224 up 1 fe80::250:56ff:feb7:a7e3 query 00:00:24.219 00:00:07.031
Issue: #11241
Signed-off-by: Sarita Patra <saritap@vmware.com>
In current code, some ASNUMs with redundant zero are legal,
e.g. "1.01", "01.1", "1.001", "001.1", and more. They should
be forbidden.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
When upstream RPF address is secondary address, and
neighborship is built with primary address,
then pim_neighbor_find() fails.
Verify the upstream RPF address is present in the
neighbor primary and secondary address list.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When upstream RPF address is secondary, and
neighborship is built with primary address,
then pim_neighbor_find() fails, due to which when there
is upstream change it wont send prune.
Verify the nexthop is present in the neighbor primary
and secondary address list.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When there is a mismatch in nexthop address (secondary address)
and neighborship address(primary address) on the same interface,
RPF check fails.
This is fixed now.
Signed-off-by: Sarita Patra <saritap@vmware.com>
When route to RP is having nexthop secndary address,
neighborship is built with primary address,
then pim_neighbor_find() fails, which causes RP IIF
Unknown.
Fix:
Verify pim neighborship on the RP connected interface.
Issue: #11526
Signed-off-by: Sarita Patra <saritap@vmware.com>
Problem 1:
When route to BSR is having nexthop secondary address,
neighborship is built with primary address,
then pim_neighbor_find() fails, which cause drop of BSM
packet.
Fix 1:
Verify pim neighborship on the BSM received interface.
Problem 2:
Problem 2:
Source IP BSM address is primary address, where
as nexthop also can be primary or secondary address.
Fix 2:
Avoiding the check (nhaddr == src_ip) for PIMV6
Issue: #11957
Signed-off-by: Sarita Patra <saritap@vmware.com>
Once RP/BSR address is learned in PIMD, PIMD does nexthop tracking
in Zebra.
For IPV6 address, the nexthop type is either NEXTHOP_TYPE_IPV6
or NEXTHOP_TYPE_IPV6_IFINDEX.
Zebra should send nexthop ifindex information along with nexthop address
to the client (PIMD).
Issue: #11526
Issue: #11957
Signed-off-by: Sarita Patra <saritap@vmware.com>
