This commit cleans up some ugly leftovers from previous flag-override
implementation and refactors the AF-flag override implementation to
match the same behavior the newly added peer-flag override
implementation has.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The labeled unicast and unicast tables have been combined
into the unicast table. Additionally we have a restriction
where if you configure labeled unicast you cannot configure
unicast. This created a bug with 'show bgp ipv4 labeled-unicast summ'
command where we were displaying NoNeg, because v4 has been intentionally
turned off.
Modify the code so that when we are looking up if we have negotiated
a capapbility we use the correct one, while still using the appropriate
table for prefix count.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It partially implements
a refusal to create multiple instances. If you do not need
multiple instances, just don't create them in the cli instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command needs to be deprecated. It sets a small variety
of options via the BGP_OPT_CONFIG_CISCO flag. Set for removal
in 1 year.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit fixes all outstanding style/formatting issues as detected by
'git clang-format' or 'checkpath' for the new peer-group override
implementation, which spanned across several commits.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
This commit fixes peer-group overrides for inverted AF flags. This
implementation is currently only being used by the three 'send-community'
flags. Commit 70ee29b4d introduced generic support for overriding AF
flags, but did not support inverted flags.
By introducing an additional array on the BGP peer structure called
'af_flags_invert' all current and future flags which should work in an
inverted way can now also be properly overridden.
The CLI commands will work exactly the same way as before, just that 'no
<command>' now sets the flag and override whereas '<command>' will unset
the flag and remove the override.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Problem reported due to tab completion showing all possible peers
in every vrf, but when neighbor in wrong vrf entered "no such
neighbor" is the error message. Making it slightly more clear
with "no such neighbor in the view/vrf" to clue the user that they
may have specified the wrong vrf.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
This commit moves the command 'bgp enforce-first-as' from global BGP
instance configuration to peer/neighbor configuration, which can now be
changed by executing '[no] neighbor <neighbor> enforce-first-as'.
End users can now enforce sane first-AS checking on regular sessions
while e.g. disabling the checks on routeserver sessions, which usually
strip away their own AS number from the path.
To ensure backwards-compatibility, a migration routine was added which
automatically sets the 'enforce-first-as' flag on all configured
neighbors if the old global setting was activated. The old global
command immediately disappears after running the migration routine once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation does not respect the AFI+SAFI combination of
a peer when executing a non-soft (hard) clear. An example would be the
command `clear bgp ipv4 unicast *`, which will clear all BGP peers, even
those that do not have IPv4-Unicast activated.
This commit fixes that behavior by applying the same rules to both soft
and hard clear commands, so that peers without a matching AFI+SAFI
combination will be no longer modified.
Additionally, this commit adds warning messages to all `clear bgp
[<afi>] [<safi>] <target>` commands when no matching peers with the given
AFI+SAFI combination could be found.
Both existing and new warning messages have been extended to also
mention the AFI+SAFI combination that is missing, which is more helpful
to the user than a generic expression 'No peer configured'.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The current implementation of building JSON output is greatly different
for large communities compared to standard communities. This is mainly
noticeable by the missing 'list' attribute, which usually offers an
array of all communities present on a BGP route.
This commit adds the missing functionality of properly returning a
'list' attribute in JSON output and also tries a similar approach like
the standard communities are using to implement this feature.
Additionally, the 'format' specifier has been completely removed from
large communities string/JSON rendering, as the official RFC8092 specifies that
there is only one canonical representation:
> The canonical representation of BGP Large Communities is three
> separate unsigned integers in decimal notation in the following
> order: Global Administrator, Local Data 1, Local Data 2. Numbers
> MUST NOT contain leading zeros; a zero value MUST be represented with
> a single zero. Each number is separated from the next by a single
> colon. For example: 64496:4294967295:2, 64496:0:0.
As the 'format' specifier has not been used/checked and only one
canonical representation exists per today, there was no reason to keep
the 'format' parameter in the function signature.
Last but not least, the struct attribute 'community_entry.config' is no
longer being used for large communities and instead 'lcommunity_str' is
being called to maintain a similar approach to standard communities.
As a side effect, this also fixed a memory leak inside 'community_entry_free'
which did not free the allocated memory for the 'config' attribute when
dealing with a large community.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
Before this fix, both real neighbors and peer-groups were lumped
together in auto-completion and it didn't work at all for
peer-groups. This fix changes that behavior to do the right
thing.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
In the FRR implementation of EVPN,
eBGP leaf-spine peering for EVPN is fully supported by allowing
the next hop to be propagated and not rewritten at each hop.
There are other changes also related to route import to facilitate this.
However, propagating the next hop is not correct in some cases.
Specifically, if the DC is comprised of multiple PODs
with distinct intra-POD and inter-POD VxLAN tunnels,
EVPN routes received from an adjacent POD by a border/exit leaf
must be propagated into the local POD with the next hop rewritten (to self).
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
The loop over all afi's implies that these commands actually need
to loop over all afi's to check the vpn policy. We know the
appropriate afi based upon the node we are in. So just return
the correct afi to look at and then just apply it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, you could configure importing a vrf from inside
the same vrf. This can lead to unexpected behavior in the leaking
process. This fix disallows that behavior.
Ticket: CM-20539
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Tripped over a crash running the cli_crawler that occurred when the
sequence was doing "import vrf NAME" and "no import vrf NAME" inside
a vrf but a default bgp instance had not been created. This fix
auto-creates the default instance if the "import vrf NAME" is
entered and a default instance does not exist.
Ticket: CM-20532
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Prior to this fix, the import vrf route-map command only worked
if the route-map existed prior to the command. Additionally, if
the import vrf route-map command was issued without an existing
route-map, the imported prefixes were not removed. This fix
resolves both of thes mis-behaviors. bgp-smoke run with same
failures as base.
Ticket: CM-20459
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7358
Found that when doing "import vrf default" in another vrf, an
extra line was added to the configuration in error. This fix
resolves that incorrect configuration. Manual testing will be
attached to the defect.
Ticket: CM-20467
Signed-off-by: Don Slice <dslice@cumulustnetworks.com>
Reviewed by: Donald Sharp <sharpd@cumulusnetworks.com>
Added the cli for doing route-map filtering on imported routes via
the new "import vrf route-map <NAME> command.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Implement fixes for route leaking between VRFs through BGP, especially for
the scenario where routes are leaked from a VRF X to multiple other VRFs.
This include making sure that import and export happen via the global VPN
table, setting RD correctly and proper handling for multiple import/export.
Ticket: CM-20256
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the `import vrf XXX` command is entered under
an afi/safi for bgp and the XXX vrf bgp instance
does not yet exist, auto-create it using the same
ASN that the we are importing into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
add the `import vrf XXXX` command
router bgp 4 vrf DONNA
<config>
!
router bgp 4 vrf EVA
<config>
address-family ipv4 uni
import vrf DONNA
!
!
This command will allow for vrf EVA to specify that it would like
to receive the routes from vrf DONNA into it's table.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Remove unused parameter
* Restore behavior described by function comment
* Eliminate NPD caught by static analysis
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add support for CLI "auto" keyword in vrf->vpn export label:
router bgp NNN vrf FOO
address-family ipv4 unicast
label vpn export auto
exit-address-family
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This work is derived from a work done by China-Telecom.
That initial work can be found in [0].
As the gap between frr and quagga is important, a reworks has been
done in the meantime.
The initial work consists of bringing the following:
- Bringing the client side of flowspec.
- the enhancement of address-family ipv4/ipv6 flowspec
- partial data path handling at reception has been prepared
- the support for ipv4 flowspec or ipv6 flowspec in BGP open messages,
and the internals of BGP has been done.
- the memory contexts necessary for flowspec has been provisioned
In addition to this work, the following has been done:
- the complement of adaptation for FS safi in bgp code
- the code checkstyle has been reworked so as to match frr checkstyle
- the processing of IPv6 FS NLRI is prevented
- the processing of FS NLRI is stopped ( temporary)
[0] https://github.com/chinatelecom-sdn-group/quagga_flowspec/
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: jaydom <chinatelecom-sdn-group@github.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is relying on bgp vpn-policy. It is needed to configure
several bgp vrf instances, and in each of the bgp instance, configure
the following command under address-family ipv4 unicast node:
[no] rt redirect import RTLIST
Then, a function is provided, that will parse the BGP instances.
The incoming ecommunity will be compared with the configured rt redirect
import ecommunity list, and return the VRF first instance of the matching
route target.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
- vpn_leak_to_vpn_active(): check instance type
- vpn_leak_prechange(): qualify with test for active
- vpn_leak_postchange(): remove duplicated call to
vpn_leak_from_vrf_update_all()
- bgp_vty.c: Avoid null-pointer dereference for command "no rt vpn import"
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This commit fixes the handling of incoming parameters passed in
following vty functions:
clear ip bgp ipv6 [safi] prefix []
clear ip bgp [vrf ] ipv6 [safi] prefix []
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This worked for unnumbered peers but not for numbered peers. This is
before the fix:
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor swp1 interface peer-group FOO
neighbor 1.1.1.1 peer-group FOO
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10# wr
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Integrated configuration saved to /etc/frr/frr.conf
[OK]
cel-redxp-10# conf t
cel-redxp-10(config)# router bgp
cel-redxp-10(config-router)# no neighbor swp1 interface peer-group FOO
cel-redxp-10(config-router)# no neighbor 1.1.1.1 peer-group FOO
cel-redxp-10(config-router)# do show run
Building configuration...
Current configuration:
!
frr version 4.1-dev
frr defaults datacenter
hostname cel-redxp-10
!
service integrated-vtysh-config
!
password cn321
!
log syslog
!
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor 1.1.1.1 remote-as external
!
address-family ipv4 unicast
no neighbor 1.1.1.1 activate
exit-address-family
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10(config-router)#
After the fix "no neighbor 1.1.1.1 peer-group FOO" removes the 1.1.1.1
neighbor.
We need a better error message. "Multiple BGP processes are configured"
doesnt makes sense anymore as with l3vni,
we could have multiple auto configured bgp instances.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
We've run across an issue where the local connected
ip address is not being removed in some error condition.
During trackdown it was noticed that we cannot look
at this table for views/vrf's. While we don't have the
bug tracked down yet this will help us figure it out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported with output of the command "show bgp vrf all
neighbor x.x.x.x" not limiting the output to that peer in any vrf.
This fix corrects the logic to display by neighbor
(ipv4/ipv6/interface) in any vrf.
Ticket: CM-17377
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The bestpath multipath-relax setting was added to the output of
"show ip bgp neighbor json" several months ago but this is not
the correct place to display that information and this fix removes
it from there. The multipath-relax setting was also added
to the output of "show ip bgp sum json" which is fine.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Adds ability to specify that peers should be administratively shutdown
when first configured.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Remove the ability to attempt to configure a couple of options on
directly connected neighbors that don't make sense for them, as well as
the soft error handling code.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If we have configured neighbor 1.1.1.1 for an afi/safi but they have not
activated that afi/safi with us then display "NoNeg" in the state column
of the summary output. This is to make troubleshooting afi/safi
easier.
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
The bgpTimerUp value was incorrectly named, add
a correct name bgpTimerUpMsec and add some
code to allow for deprecation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For some reason bgp is calculating the peer uptime
in miliseconds incorrectly. Additionally we have
the peer_uptime function call that should be doing this!
But since we've choosen different names for the json output
we cannot fix it at this point.
uptime contains the number of seconds of uptime here. Just
multiply by 1k and display that( as peer_uptime does )
Fixes: #1585
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Was using 0 as a sentinel value, so user couldn't configure 0 as the
value of the coalesce timer.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
BGP VRF can be created/deleted either via config or via l3vni add/del.
We need to handle various sequences.
1. If user config is presented, an l3vni del should not delete the vrf instance
2. do not write bgp config in show running for auto created vrf
2. If l3vni present, disallow the cli for deleting bgp vrf instance
3. If l3vni is added and vrf config is present set the flags properly
4. if bgp vrf is configured unset the AUTO flag
Ticket: CM-18630
Review: CCR-6906
Testing: Manual
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Since coalesce time is now heuristically adjusted based on peer count,
we need to separate out specific configuration by the user from the
current value. Behavior established is to not adjust if the user has a
value set.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bgpd supports setting a write-quanta that serves as a hint on how many
packets to write per I/O cycle. Now that input is buffered, it makes
sense to add the equivalent parameter for how many packets are processed
per cycle. This is *not* how many packets are read off the wire per I/O
cycle; rather it is how many packets are processed from the input buffer
in a given cycle after having been read off the wire and sanitized.
Since these values must be used from multiple threads, they have also
been made atomic.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Move and modify all network input related code to bgp_io.c
* Add a real input buffer to `struct peer`
* Move connection initialization to its own thread.c task instead of
piggybacking off of bgp_read()
* Tons of little fixups
Primary changes are in bgp_packet.[ch], bgp_io.[ch], bgp_fsm.[ch].
Changes made elsewhere are almost exclusively refactoring peer->ibuf to
peer->curr since peer->ibuf is now the true FIFO packet input buffer
while peer->curr represents the packet currently being processed by the
main pthread.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Remove t_write
* Remove t_keepalive
These have been replaced by pthreads and are no longer needed. Since
some code looks at these values to determine if the threads are
scheduled, also add a new bitfield to store the same information.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Building a communities json object every time is
both expensive and memory wasteful. Modify
code to only build the json object when needed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fixes a bug whereby all peer-groups would be shown even when a
particular peer-group was specified for display.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Problem reported that we weren't adjusting the keepalive timer
correctly when we negotiated a lower hold time learned from a
peer. While working on this, found we didn't do inheritance
correctly at all. This fix solves the first problem and also
ensures that the timers are configured correctly based on this
priority order - peer defined > peer-group defined > global config.
This fix also displays the timers as "configured" regardless of
which of the three locations above is used.
Ticket: CM-18408
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-6807
Testing-performed: Manual testing successful, fix tested by
submitter, bgp-smoke completed successfully
When retrieving information about neighbors or summary in json
add some information about what bestPath particulars we have for
this bgp session.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
VARIABLE tokens must be all uppercase, this allows us to support WORD
tokens that begin with an uppercase letter. The "Null0" keyword is an
example of where this is needed.
The only VARIABLE we had that wasn't already all uppercase was
ASN:nn_or_IP-address:nn
1) Add hash names to all hash_create calls
2) Fix community_hash, ecommunity_hash and lcommunity_hash key
creation
3) Fix output of community and lcommunity iterators( why would
we want to see the memory location of the backet? ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of this was so egregiously stupid, I couldn't look at it without
gouging my eyes out...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
afi_header_vty_out() is easily replaced with vty_frame(), which means we
can drop a whole batch of "int *write" args as well as the entirety of
bgp_config_write_family_header().
=> AFI/SAFI config writing is now a lot simpler.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The bgp clear help string was misordered.
New output:
robot.cumulusnetworks.com# clear bgp
(1-4294967295) Clear peers with the AS number
* Clear all peers
A.B.C.D BGP neighbor address to clear
WORD BGP neighbor on interface to clear
X:X::X:X BGP IPv6 neighbor to clear
external Clear all external peers
ipv4 Address Family
ipv6 Address Family
peer-group Clear all members of peer-group
prefix Clear bestpath and re-advertise
view BGP view
vrf BGP VRF
Fixes: #1005
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the MAC changes for a local neighbor, ensure that the neighbor data
structure as well as the link between the neighbor and MAC data structures
is updated correctly.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-17565
Reviewed By: CCR-6605
Testing Done: Manual, evpn-smoke
1. Added support to create mac filters
2. Enabled route-map commands for EVPN address family
3. Provision to add mac filters under match clause in route-maps
Ticket: CM-16349
Review: CCR-6190
Unit-test: Manual (logs attached to ticket)
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
SAFI values have been a major source of confusion over the last few
years. That's because each SAFI needs to be represented in two different
ways:
* IANA's value used to send/receive packets over the network;
* Internal value used for array indexing.
In the second case, defining reserved values makes no sense because we
don't want to index SAFIs that simply don't exist. The sole purpose of
the internal SAFI values is to remove the gaps we have among the IANA
values, which would represent wasted memory in C arrays. With that said,
remove these reserved SAFIs to avoid further confusion in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
Most of the attributes in 'struct attr_extra' allow for
the more interesting cases of using bgp. The extra
overhead of managing it will induce errors as we add
more attributes and the extra memory overhead is
negligible on anything but full bgp feeds.
Additionally this greatly simplifies the code for
the handling of data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
bgpd: Fix missing label set
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement configuration options for EVPN. The configuration options include
VNI configuration with RD and Import and Export Route Targets. Also, display
the EVPN configuration.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement the command 'advertise-all-vni' under the EVPN address-family
in order to allow the local system to learn about local VNIs (and MACs
and Neighbors corresponding to those VNIs) and exchange with other EVPN
speakers.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Restoring some code that was unintentionally removed when we were
migrating to Quentin's parser.
* Pass ->text to functions that now do full string matching
* Remove cases for l2vpn and evpn where they cannot occur
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
log.c provides functionality for associating a constant (typically a
protocol constant) with a string and finding the string given the
constant. However this is highly delicate code that is extremely prone
to stack overflows and off-by-one's due to requiring the developer to
always remember to update the array size constant and to do so correctly
which, as shown by example, is never a good idea.b
The original goal of this code was to try to implement lookups in O(1)
time without a linear search through the message array. Since this code
is used 99% of the time for debugs, it's worth the 5-6 additional cmp's
worst case if it means we avoid explitable bugs due to oversights...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
- All ipv4 labeled-unicast routes are now installed in the ipv4 unicast
table. This allows us to do things like take routes from an ipv4
unicast peer, allocate a label for them and TX them to a ipv4
labeled-unicast peer. We can do the opposite where we take routes from
a labeled-unicast peer, remove the label and advertise them to an ipv4
unicast peer.
- Multipath over a labeled route and non-labeled route is not allowed.
- You cannot activate a peer for both 'ipv4 unicast' and 'ipv4
labeled-unicast'
- The 'tag' variable was overloaded for zebra's route tag feature as
well as the mpls label. I added a 'mpls_label_t mpls' variable to
avoid this. This is much cleaner but resulted in touching a lot of
code.
* Ranges for some MED were 2^32 - 2 instead of 2^32 - 1
* Use correct printf specifiers for unsigned values
* Some drive-by CLI collapsing and simplification
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
(This was intended as further demonstration of the DEFPY code, but it
might as well go into the tree.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Revert "ospf6d: fix decimal area ID cli"
commit a27cb3cfe9
Revert "bgpd: add back unicast option to 'address-family vpnv(4&6)' Issue #459"
commit 399598bf6b
Revert "Fix the memory leak"
commit d8d58e9839
Revert "zebra: 'no ip route 4.1.1.19 255.255.255.255 99' is ambiguous"
commit 83f3561935
Revert "ospf6d: Allow unconfig of unknown lsa's"
commit 5b0747d71d
Revert "Fix the "Dead assignment" of clang SA."
commit 3a6570a1f1
Revert "snapcraft: Improve README.usage.md based on feedback received"
commit 2a3a819a9c
Revert "zebra: stop deregistering static nexthops unless removing the static"
commit 1dac3a9619
All of these changes do not apply on stable/3.0 due to either CLI
changes or another fix already being present.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Sometimes, like once every 400 iterations, when you restart
Quagga, extended-nexthop has been turned off for interface
based config( for 5549 ).
Examining the code, there is only 1 real path to setting
the PEER_FLAG_CAPABILITITY_ENHE and that is through
peer_conf_interface_get. Modify this code path
to always set the PEER_FLAG_CAPABILITY_ENHE if it is
not already set.
In addition, fix a possible pointer dereference.
Ticket: CM-12929
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we configure authentication. Allow the 'show bgp neighbor'
commands( and their ilk ) to indicate that the peer has
authentication enabled.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
If you did:
neighbor swp1 interface
neighbor swp1 interface remote-as external
we would not set the remote-as. You could however still do
neighbor swp1 remote-as external
Sometimes, like once every 400 iterations, when you restart
Quagga, extended-nexthop has been turned off for interface
based config( for 5549 ).
Examining the code, there is only 1 real path to setting
the PEER_FLAG_CAPABILITITY_ENHE and that is through
peer_conf_interface_get. Modify this code path
to always set the PEER_FLAG_CAPABILITY_ENHE if it is
not already set.
In addition, fix a possible pointer dereference.
Ticket: CM-12929
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This wasn't quite correct in the previous patch, leading to peer-groups
& interface peers breaking in autocompletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Problem uncovered with crash when entering the command "show ip bgp
vrf vrf1001 0.0.0.0". The crash was caused by a mistake incrementing
the index value in the vrf/view case. Manual testing completed and
failing test case now passes successfully.
Ticket: CM-16223
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed By: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes two crashes:
1) When we enter a 'neighbor shutdown..' command for a peer
group or interface based peer we were not properly looking
up the peer.
2) When we we enter 'no neighbor shutdown..' command for
a peer group or interface based peer we were not properly
lookup up the peer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'show ip bgp neighbors swp31s0' command was not
working properly. This fixes that issue.
This command still has issues that need to be investigated
but for the moment this gets the command working in the
form that is needed. More rework can come.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the 'show ... bgp ... summary' command when you are
looking at a afi( with no safi specified ) to only display
output for those safi's that have been configured.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The use of VTY_DECLVAR_CONTEXT(bgp, bgp) here is wrong as we are not
inside the "router bgp" configuration node. This was making the clear
commands always fail with a "Current configuration object was deleted
by another process" error, which doesn't make any sense.
Also, the bgp_clear() function will already check for us if the given
peer-group or neighbor exists or not, there's no need to duplicate this
logic here.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove the UNDEFINED_NODE as that it's implementation breaks
our ability in BGP to figure out where we are by allowing
default: in the switch statement.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for activating the labeled-unicast address family in
BGP and relevant configuration for this address family.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When starting up bgp and zebra now, you can specify
-e <number> or --ecmp <number>
and that number will be used as the maximum ecmp
that can be used.
The <number specified must be >= 1 and <= MULTIPATH_NUM
that Quagga is compiled with.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The introduction of AFI_L2VPN prefix makes usage of AFI_ETHER deprecated
and is of no usage currently. The former replaces the latter one.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Added the possibility to enter in evpn address-family in bgp node, by
using 'address-family l2vpn evpn' command.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
To handle BGP NLRI EVPN messages, bgp is modified to handle AFI_L2VPN
and SAFI_EVPN values.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introduction of EVPN address-family node that is reachable under
BGP node, like follow: address-family evpn. Under that node, only
some commands are available for configuring a neighbor or setting
some basic settings like attribute unchanged behaviour. Currently,
no vty command is available for setting NLRI entries for EVPN.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
dn_flag was tested inside of a 'use_json' block
further down in the function. Move initialization
of the value to outside of the !use_json if statement
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit 713de0685f.
During Discussions with Lou, it was decided that his code
changes would handle this part, and my code changes would
fix up vtysh and bgp to be in sync again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The behavior of some show commands was switched from
showing the unicast data to all safi data. This
is a change in behavior and needs to be put
back for 2.0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
extract.pl.in requires the lines that are ignored
to be consisten with what is in the *.c file
that we are ignoring from, else we get ambiguous
commands.
This allows vtysh to enter address-family sub mode
in bgp again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-14136
Reviewed By: CCR-5585
Testing Done: bgpmin
The JSON output of 'bgp neighbor show' lacked the decoded strings for
the last notification error code/subcode. Decoding these strings outside
quagga is painful, and then needs to match with any updates to the codes
from RFCs/drafts. Further, all apps that look to understanding this need
to then add their own decoders for these strings.
Just add the decoded strings to the JSON output as well. JSON key name
for this is 'lastNotificationReason'.
Signed-off-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
A common misconfiguration that was silently accepted but wouldn't work
was including the prefix length on the update-source; i.e. 10.1.1.1/32.
This commit rejects this config and notifies the user.
Ticket: CM-13485
Signed-off-by: Don Slice <dslice@cumulusnetworks.com.
Reviewed-by: Donald Sharp
Somewhere in the past we switched from
using the auto-generated redistribute statements
to a non-generated version. This caused us to
loose new protocols to redistribute as they are
added. Put it back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fix addresses these things:
1) Clean up documentation as requested
2) Fix a wrong search for "exact-match"
3) Fix possible crash.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Harmony is restored to the world as bgp and vtysh
can now, again, stay in sync with each other.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(to match surrounding code)
"git diff -w" should be almost empty.
Copyright edited to say FRR, this is not GNU Zebra :)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Because the vpn configuration command was duplicate, there was an
ambiguity to raise. This is a fix that permits configuring vpnv4 or
vpnv6 address-families on bgp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
1) Make [<view|vrf> WORD] consistent
2) Fix inconsistent help string
3) Fix the show .. vrf all command
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create bgp_vty_find_and_parse_afi_safi_vrf that
will parse the
`show [ip] bgp [<view|vrf> WORD] [<ipv4|ipv6> [<unicast|multicast|vpn|encap>]]'
part of a command and to return the correct spot we are in the command.
Cleanup 'dampening parameters' part of this command.
Consolidate the creation of the bgp data structure to be a bit cleaner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_parse_safi function is never called remove it.
Especially as that later commits will properly handle
what this function was trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The original commit for large communities broke
'show ip bgp' and 'show bgp ipv4 unicast' and
their ilk. This commit fixes this as well
as some vtysh parse errors identified.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP Large Communities are a novel way to signal information between
networks. An example of a Large Community is: "2914:65400:38016". Large
BGP Communities are composed of three 4-byte integers, separated by a
colon. This is easy to remember and accommodates advanced routing
policies in relation to 4-Byte ASNs.
This feature was developed by:
Keyur Patel <keyur@arrcus.com> (Arrcus, Inc.),
Job Snijders <job@ntt.net> (NTT Communications),
David Lamparter <equinox@opensourcerouting.org>
and Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Job Snijders <job@ntt.net>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use KEEP_OLD_VPN_COMMANDS define to brace some vty commands used by bgp
to configure or show vpnvx contexts using old method, that is to say
using vty keyword vpnv4 or vpnv6 command.
In addition to this, the commit adds two new commands under route-map
with new format:
[no] set ipv4|ipv6 vpn nexthop <IPv4 Address> | <IPv6 Address>
It also add following command in old format:
[no] set vpnv6 nexthop <IPv6 Address>
Note that the commit does not take into account the availability of old
commands that are not available in new format.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com
Conflicts (CLI vs. atol()):
- bgpd/bgp_vty.c
- ospfd/ospf_vty.c
- zebra/zebra_vty.c
NB: pull req #65 (LabNConsulting/working/2.0/afi-safi-vty/c) was
excluded from this merge.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Unfortunately, the CLI changes need to be redone on master since the CLI
has massively changed there.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Added defines and parse utility functions
Fix vty code that treated vpn&encap as AFIs
and some other related vty printing/handline issues
Note: Includes branch specific changes (due to new parser)
Signed-off-by: Lou Berger <lberger@labn.net>
On ARM platforms specifying a local-as greater than
2 billion causes issues due to atoi usage.
Ticket: CM-14019
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Preserve forwarding state bit can be set in OPEN message with the use of
new vty commands
bgp graceful-restart preserve-fw-state
no bgp graceful-restart preserve-fw-state
This must be set before activating the connection to a peer, since it is
for forging graceful restart capability of OPEN messages.
Signed-off-by: Julien Courtat <julien.courtat@6wind.com>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The first time through calling 'show ip bgp summary'
we were always calculating the variable hostname field
size incorrectly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
These now generate warnings which will break the build with -Werror.
Note this may have enabled commands that should be disabled, or the
other way around...
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* show ip bgp vpnv4 all <A.B.C.D|A.B.C.D/M> [json]
* show...vpnv4 <all|rd ...> summary...
* Fix placement of AF+SAFI specifiers for BGP clear commands
* Add more [ip]'s for bgp commands
* clean up some doc strings
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-13511
connectionsEstablished, etc are no longer under the addressFamilyInfo
keyword, they are now at the top level
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Now that we display hostnames in 'show ip bgp summary' it is really easy
to have the first column be greater than 16 characters which causes a
line wrap. The line wrap makes the output difficult to read.
Before
======
superm-redxp-05# show ip bgp summ
BGP router identifier 6.0.0.11, local AS number 65001 vrf-id 0
BGP table version 56
RIB entries 19, using 2280 bytes of memory
Peers 2, using 41 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
leaf-11-really-long-name(swp1)
4 65101 307 322 0 0 0 00:14:15 10
leaf-12(swp2) 4 65101 105 121 0 0 0 00:14:14 Idle (Admin)
Total number of neighbors 2
superm-redxp-05#
After
=====
superm-redxp-05# show ip bgp summ
BGP router identifier 6.0.0.11, local AS number 65001 vrf-id 0
BGP table version 10
RIB entries 19, using 2280 bytes of memory
Peers 2, using 41 KiB of memory
Peer groups 1, using 64 bytes of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
leaf-11-really-long-name(swp1) 4 65101 11 12 0 0 0 00:00:08 10
swp2 4 0 0 0 0 0 0 never Idle (Admin)
Total number of neighbors 2
superm-redxp-05#
superm-redxp-05#
Ticket: CM-13053
Reviewed By: dslice@cumulusnetworks.com
'neighbor x.x.x.x weight' was implemented as a per-peer knob instead of
a per-peer per-afi-safi option. This makes it configurable per-peer
per-afi-safi so that we can do things like soft clear that afi/safi when
weight is modified.
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RESTRICTED_NODE command is not used, introduces code
complexity and provides no additional levels of security.
The only way to get into RESTRICTED_NODE is to add, under
vty configuration the command 'anonymous restricted', and
then telnet to a daemon, provide a password, then type
'enable' and fail to enter the password three times.
Then the user can enter a very limited set of commands to
monitor bgp and only bgp behavior.
This commit removes both the RESTRICTED_NODE usage as well
as the lib/* usage of the code
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Sam Tannous <stannous@cumulusnetworks.com>
Ticket:
These commands were ported forward from these
commits:
f9b6c39 bgpd: Add back old forms of 'show <afi> <safi>' for compatibility
bf1ae6c bgpd: drop machineparse / random "show" improvements
651b402 bgpd: encap show commands
35c3686 bgpd: VPNv6 show commands
135ca15 bgpd: cleanup vty bgp_node_afi/safi utils
This is the first drop of those commits. The files have
changed too much and the diffs to extensive to try to do it
in one piece. Break it up into smaller code chunks.
Original Code:
Signed-off-by: Lou Berger <lberger@labn.net>
Forward Port:
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Move over to the new allocation counting added in the previous commit.
(This commit is mostly mechanical.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Found several leaks in bgp_show_peer and bgp_show_peer_afi where
json objects are created and then not attached to the parent, causing
them to be leaked. If not attaching them, freeing the created objects.
Manual testing performed successfully. Fix tested succesfully by the
submitter and bgp-smoke completed with same failures as base.
Ticket: CM-12846
Signed-off-by: Don Slice
Reviewed-by: CCR-5181
There is support to configure graceful restart timer. This is the
time to wait to delete stale routes before a BGP open message is
received.
bgp graceful-restart restart-time <1-3600>
no bgp graceful-restart [<1-255>]
* bgpd/bgp_vty.c
* Define command strings for above CLI
* bgpd/bgpd.c
* bgp_config_write(): Output graceful restart-time configuration
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Tested-by: NetDEF CI System <cisystem@netdef.org>
* Solaris doesn't have u_int64_t, so use uint64_t instead. C99-style
fixed-width integers should always be preferred to improve portability;
* 's_addr' is a macro on Solaris, so we can't use it as a variable name.
Rename the 's_addr' variable to 'addr' in the
bgp_peer_conf_if_to_su_update_v4() function.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
lib/zebra.h has FILTER_X #define's. These do not belong there.
Put them in lib/filter.h where they belong.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 0490729cc033a3483fc6b0ed45085ee249cac779)
Logic for determining the router-id was spread out over bgp_zebra.c and
bgp_vty.c. Move to bgpd/bgpd.c and have these two call more properly
encapsulated functions.
Significant work by Christian Franke <chris@opensourcerouting.org>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Found that original fix for CM-10113 had a significant flaw, that
by deriving the bgp instance from the vty->index, if a clear ip bgp
command was entered from a vty index other then bgp, a crash occurred.
This fix passes the bgp->name to the clear functions so the correct
instance can be derived. Tested manually in both the CM-10113 case
as well as the problem discovered while testing CM-11480.
Ticket: CM-10113
Signed-off-by: Don Slice
Reviewed-by:
Some bgp commands end with doing a bgp_clear_vty, which invalidly
made the assumption that the clear should always be done for the default
instance. This fix derives the correct instance from the vty-index if
one is supplied, and uses the default instance if it is not.
Ticket: CM-10113
Signed-off-by: Don Slice
Reviewed-by: Donald Sharp
To make BGP configuration as simple as possible, assume the capability
extended-nexthop to be default for interface neighbors. Also allow the
ability to specify remote-as on the same line as neighbor interface to
make BGP unnumbered configuration a single line.
One corner case. This is the first feature for which the default for a
member is different from the default for a peer-group. Since advertising
the capability is only done for interface neighbors, the capability is
not set for the peer-group, but is automatically set for interface
neighbors that belong to that peer-group. So, if you want to disable the
advertisement of this capability for an interface neighbor, you must
do it per each interface neighbor.
The patch is more complicated than it needs to be due to the handling
of quagga reload and appropriate updates to the show running output.
Ticket: CM-11830
Reviewed By: CCR-4958
Testing Done: Usual coterie, including manual
(cherry picked from commit 347914a0a7)
When there is one BGP router instance, `no router bgp` may be used to
deconfigure it without specifying its ASN
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ospfd: OSPF should accept "router-id IFNAME"
Added commands in BGP and OSPF where user can specify interface for router-id.
Ticket: CM-5040
Reviewed By: CCR-4908
Testing Done: Manual
"neighbor <interface> disable-connected-check" should not be allowed by the parser
Made changes to not allow hops greater than 1 and disable-connected check for neighbor <interface>
Ticket: CM-5536 CM-5537
Reviewed By: CCR-4865
Testing Done: Manual
Ticket: CM-11344
Reviewed By: dwalton, dsharp
Testing Done: built and tested amd64 debs
This patch adds the peerID JSON attribute for routes for show ip bgp json.
It also corrects the bgpTimerLastWrite in show ip bgp neigh json as well
as adds bgpInUpdateElapsedTimeMsecs, lastErrorCodeSubcode, and connectRetryTimer.
These are needed for the bgp4 mib implementation (rfc 4273) from the json
output of vtysh commands.
VPNv6 changes picked from upstream needed fixes and updates due to some
fundamental changes implemented by Cumulus (BGP update-groups, RFC 5549
and nexthop setting etc.) which aren't present upstream.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Updates: 945c8fe, 8ecd326, bb86c60, 93b73df, f4c8985
Ticket: CM-11350
Reviewed By: dsharp
Testing Done: built amd64 images and tested output of both json and non-json
Upstream patch was applied in wrong section of code so JSON
output contained plain text. The upstream patch was
commit baa376fc1 (cherry picked from ef757700d0f)
This patch moves the text output to the correct if clause
and also adds a new JSON line for the same data.
Signed-off-by: Sam Tannous <stannous@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Avoids a dynamic allocation which is usually freed immediate afterwards.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
