Some values for icmp type/code can not be encoded like port source or
port destination. This is the case of 0 value that is authorized for
icmp.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The flowspec fragment attribute is taken into account to be pushed in
BGP policy routing entries. Valid values are enumerate list of 1, 2, 4,
or 8 values. no combined value is supported yet.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The packet length can be injected from fs entry with an enumerate list;
the negation of the value is also taken into account.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those flags can be shared between BGP and Zebra. That is why
those flags are moved to common pbr.h header file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When in a dev build add a bit of code to track max
depth of a fifo and to allow zebra to report on it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Previous correction (2c2d5cb397) was not enough,
so now it is ensured that the argument shift is not negative nor zero.
Signed-off-by: F. Aragon <paco@voltanet.io>
If your daemon does not need any special privileges
and you are compiling with HAVE_CAPABILIES, the
zprivs->change pointer will end up NULL due
to the way zprivs_caps_init. So as a check
let's add a NULL check for zprivs->change
and set it to a function that will do nothing.
This change prevents a crash if you raise privileges
when your daemon needs no special privileges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_clear_updated is only used by routemap.c,
don't expose it too be used by the outside world.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
route_map_mark_updated has a `int del_later` variable
that is passed in but never used. Just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to specify the designated log level at startup.
--log-level <emergencies|alerts|critical|errors|warnings|notifications|informational|debugging>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove the special case code to use syslog for Cumulus.
They can specify this via startup now instead of having
a special compile flag for this option.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are starting a daemon, allow the user to specify:
--log <stdout|syslog|file:file_name>
This can be used on early startup to put the log files
where the end user wants them to show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The read in of cli was happening prior to thread
event handling for non-integrated configs. This
is interesting for 2 reasons:
1) Read-in of integrated configs was after thread
event loop startup, so we had a difference of behavior
2) Read-in can cause a series of events that cause
us to attempt to communicate with zebra. The zebra
zapi connection only happens after the thread event
loop has been started. This can cause data that
is being written down to zebra to be lost and
no real way to notice that this has happened and
to recover gracefully.
Modify the code to create a thread event for read
in of client config.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we fail to read in the config file and we have
specified a backup of the backup, attempt to
read that information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When reading the config file add an ability to know
if we have properly read in anything. So that a daemon
can make fallback plans.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are iterating through the hash, keep count of how many
we've called and if we have finished calling the hash->size
iterator times, then short-circuit and stop looping over
the entire array.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Unfortunately user CFLAGS causes #define conflicts with #defines in
Python development headers, which causes build failures under certain
platforms when using -Werror.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The current implementation of peer flags (e.g. shutdown, passive, ...)
only has partial support for overriding flags of a peer-group when the
peer is a member. Often settings might get lost if the user toys around
with the peer-group configuration, which can lead to disaster.
This commit introduces the same override implementation which was
previously integrated to support proper peer flag/attribute override on
the address-family level. The code is very similar and the global
attributes now use their separate state-arrays *flags_invert* and
*flags_override*.
The test suite for BGP peer attributes was extended to also check peer
global attributes, so that the newly introduced changes are covered. An
additional feature was added which allows to test an attribute with an
*interface-peer*, which can be configured by running `neighbor IF-TEST
interface`. This was introduced so that the dynamic runtime inversion of
the `extended-nexthop` flag, which is only enabled by default for
interface peers, can also be tested.
Last but not least, two small changes have been made to the current bgpd
implementation:
- The command `strict-capability-match` can now also be set on a
peer-group, it seems like this command slipped through while
implementing peer-groups in the very past.
- The macro `COND_FLAG` was introduced inside lib/zebra.h, which now
allows to either set or unset a flag based on a condition. The syntax
for using this macro is: `COND_FLAG(flag_variable, flag, condition)`
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
* Move configure flag propagations out of user flags
* Use AC_SUBST to transfer flag values to Automake
* Set default AM_CFLAGS and AM_CPPFLAGS in common.am and change child
Makefiles to modify these base variables
* Add flag override to turn off all sanitizers when building clippy
* Remove LSAN suppressions blacklist as it's no longer needed
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes output would be mangled when filtering with include as a
result of the following bugs:
* Filters were applied per each call to vty_out() instead of buffering
until a line break and then applying
* Long output would sometimes be cut due to using the wrong buffer
pointer
Also remove the trailing \n as it should no longer be necessary to
ensure the vty prompt ends up on a new line.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add function to move all data to the start of a vector by shifting
over contiguous empty slots
* Use this function to remove empty slots leftover after
frrstr_filter_vec
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
An optimized version of this has already been implemented within graph.c
that assumes some specialized constraints for that code. It's generally
useful so this change implements a general purpose version of it.
This fixes cmd_make_strvec() that was broken by some code shuffling in
previous commits.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a CLI preprocessor function that activates when `|` is
found in the command. This is the start of adding support for some text
processing utilities intended for inline use. The first one implemented
here is `| include`, which provides grep-like filtering of command
output.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a hook point intended to allow subscribers to modify the
raw text of a CLI command before it is passed to the rest of the CLI
pipeline. To give access to the raw text of the command, a new function
for executing CLI has been defined whose only difference from
`cmd_execute_command` is that it accepts the command to execute as a
string rather than as a string vector.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Remove references to ospf source files from linklist.[ch]
* Remove documentation comments from hash.c and linklist.c
* Add comprehensive documentation comments to linklist.h and hash.h
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* list_dup(): duplicates a linked list
* list_sort(): in-place sort of linked list w/ ascending quicksort
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
After PBR or BGP sends back a request for sending a rule/ipset/ipset
entry/iptable delete, there may be issue in deleting it. A notification
is sent back with a new value indicating that the removal failed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Those 3 fields are read and written between zebra and bgpd.
This permits extending the ipset_entry structure.
Combinatories will be possible:
- filtering with one of the src/dst port.
- filtering with one of the range src/ range dst port
usage of src or dst is exclusive in a FS entry.
- filtering a port or a port range based on either src or dst port.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The warning string which appears when the users executes 'no (enable)
password' was moved into command.h and declared as a constant named
'NO_PASSWD_CMD_WARNING'.
This avoids duplicate code and makes it easy to change the warning
message in all places at once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
When the user executes one of the commands 'no password' or 'no enable
password', a warning message gets shown to inform the user of the
security implications.
While the current implementation works, a warning message gets printed
once for each daemon, which can lead to seeing the same message many
times. This does not affect functionality, but looks like an error to
the user as it can be seen within issue #1432.
This commit only prints the warning message inside lib when vtysh
dispatch is not being used. Additionally, the warning message was copied
into the vtysh command handlers, so that they get printed exactly once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
The pull request #1545 from @donaldsharp introduced the command 'no
password' to remove an existing terminal connection password.
Additionally, warnings have been added to both 'no password' and 'no
enable password' to make the user aware of any security implications.
It seems that this specific pull request was never merged against master
and got lost. This commit is a cherry-pick of d4961273cb with fixed
conflicts and updated documentation.
Thanks to @donaldsharp and @pogojotz for the original PR.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
For ipv6 host, the next hop is conevrted to ipv6 mapped address.
However, the remote rmac should still be programmed with the ipv4 address.
This is how the entries will look in the kernel for ipv6 hosts routing.
vrf routing table:
ipv6 -> ipv6_mapped remote vtep on l3vni SVI
neigh table:
ipv6_mapped remote vtep -> remote RMAC
bridge fdb:
remote rmac -> ipv4 vtep tunnel
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
VRF static route commands adopt global static config if static config is
placed after a vrf context with no separator, workaround by always
writing static route config before vrf config
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
stream_fifo is used as our standard internal message queue. Message
queues are useful in multithreaded environments. Up until now I have
been doing my own synchronization when using stream_fifo in this way;
this patch gets rid of the need for that boilerplate and decreases the
risk of locking mistakes when working with this datastructure.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
EVPN prefix depends on the EVPN route type.
Currently, in FRR we have a prefix_evpn/evpn_addr which relates to a evpn prefix.
We need to convert this to encompass an union of various EVPN route-types.
This diff handles the necessary code changes to adopt the new struct evpn_addr.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Customers have requested the ability to name their devices starting
with a number instead of a letter. This fix changes the check for
hostname to allow either a letter or a number.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The API for filling in an IPTABLE_ADD and IPTABLE_DELETE message.
Also, the API is handling the notification callback, so as to know if
zebra managed to add or delete the relevant iptable entry.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
With the usage of a 32 bit number as a integer, but storing
non-signed values in it, we have cases where numbers greater
than 2 billion are being read in and stored and used before
lower value numbers, which of course is awful and mean.
Fixes: #2126
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
When popping a stream from a stream_fifo, the stream->next pointer is
not NULL'd out. If this same stream is subsequently pushed onto a
stream_fifo (either the same one or a different one), because
stream_fifo's use tail insertion the ->next pointer is not updated and
thus will point to whatever the next stream in the first stream_fifo
was. stream_fifo_free does not check the count of the stream_fifo when
freeing its constituent elements, and instead walks the linked list.
Consequently it will continue walking into the first stream_fifo from
which the last stream was popped, freeing each stream contained there.
This leads to use-after-free errors.
This patch makes sure to set the ->next pointer to NULL when doing tail
insertion in stream_fifo_push and when popping a stream from a
stream_fifo.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The addr value will never be null because of the way we do the
cli, but the SA system doesn't understand this. Add an assert
to make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The grammar sandbox has had the ability to dump individual commands as
DOT graphs, but now that generalized DOT support is present it's trivial
to extend this to entire submodes. This is quite useful for visualizing
the CLI space when debugging CLI errors.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add general-purpose DFS traversal code
* Add ability to dump any graph to DOT language
* Add tests for graph datastructure
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Thread statistics are collected and stored in a hashtable shared across
threads, but while the hashtable itself is protected by a mutex, the
records themselves were not being updated safely. Change all thread
history collection to use atomic operations.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
For the last six years this source file has been using a type defined in
a header it did not include.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add general-purpose DFS traversal code
* Add ability to dump any graph to DOT language
* Add tests for graph datastructure
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Zebra is starting to have some run-time capabilites that would be
useful to pass up to the higher level protocols so that they
can act in an appropriate manner when needed.
Send the ecmp value zebra is being run with and whether or not
we believe mpls is enabled in the kernel or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
