The indentation level for ospf_read was starting to be pretty
extremene. Rework into 2 functions for improved readability.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Read in up to 20(ospf write-multipler X) packets, for handling of data.
This improves performance because we allow ospf to have a bit more data
to work on in one go for spf calculations instead of 1 packet at a time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turning on packet debugs and seeing a header dump that is 11
lines long is useless
2019/11/07 01:07:05.941798 OSPF: ip_v 4
2019/11/07 01:07:05.941806 OSPF: ip_hl 5
2019/11/07 01:07:05.941813 OSPF: ip_tos 192
2019/11/07 01:07:05.941821 OSPF: ip_len 68
2019/11/07 01:07:05.941831 OSPF: ip_id 48576
2019/11/07 01:07:05.941838 OSPF: ip_off 0
2019/11/07 01:07:05.941845 OSPF: ip_ttl 1
2019/11/07 01:07:05.941857 OSPF: ip_p 89
2019/11/07 01:07:05.941865 OSPF: ip_sum 0xcf33
2019/11/07 01:07:05.941873 OSPF: ip_src 200.254.30.14
2019/11/07 01:07:05.941882 OSPF: ip_dst 224.0.0.5
We already have this debugged, it's not going to change and the
end developer can stick this back in if needed by hand to debug
something that is not working properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit has:
The received packet path in ospf, had absolutely no debugs associated with
it. This makes it extremely hard to know when we receive packets for
consumption. Add some breadcrumbs to this end.
Large chunks of commands have no ability to debug what is happening
in what vrf. With ip overlap X vrf this becomes a bit of a problem
Add some breadcrumbs here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a helper function to return the name of the vrf we are in
so it can be used as part of debug strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have a bunch of places that look for ORIGINAL_CODING. There is
nothing in our configure system to define this value and a quick
git blame shows this code as being original to the import a very
very long time ago. This is dead code, removing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The total_peercount table was created as a short cut for queries about
if addpath was enabled at all on a particular afi/safi. However, the
values weren't updated, so BGP would act as if addpath wasn't enabled
when determining if updates should be sent out. The error in behavior
was much more noticeable in tx-all than best-per-as, since changes in
what is sent by best-per-as would often trigger updates even if addpath
wasn't enabled.
Signed-off-by: Mitchell Skiba <mskiba@amazon.com>
When you configure interface configuration without explicitly
configuring pim on that interface, we were not creating the pimreg
interface and as such we would crash in an attempted register
since the pimreg device is non-existent.
The crash is this:
==8823== Invalid read of size 8
==8823== at 0x468614: pim_channel_add_oif (pim_oil.c:392)
==8823== by 0x46D0F1: pim_register_join (pim_register.c:61)
==8823== by 0x449AB3: pim_mroute_msg_nocache (pim_mroute.c:242)
==8823== by 0x449AB3: pim_mroute_msg (pim_mroute.c:661)
==8823== by 0x449AB3: mroute_read (pim_mroute.c:707)
==8823== by 0x4FC0676: thread_call (thread.c:1549)
==8823== by 0x4EF3A2F: frr_run (libfrr.c:1064)
==8823== by 0x40DCB5: main (pim_main.c:162)
==8823== Address 0xc8 is not stack'd, malloc'd or (recently) free'd
pim_register_join calls pim_channel_add_oif with:
pim_channel_add_oif(up->channel_oil, pim->regiface,
PIM_OIF_FLAG_PROTO_PIM);
We just need to make srue pim->regiface exists once we start configuring
pim.
Fixes: #5358
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When configuring a RP, dissallow the choice of 0.0.0.0 or
255.255.255.255 as the address as that they make no sense
what so ever.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We were adding a newline for the source in some cases
but not others and tighten up the display of data
eva# show ip pim rp-info
RP address group/prefix-list OIF I am RP Source
10.254.0.1 224.0.0.0/4 lo yes Static
4.4.4.4 225.1.2.3/32 abcdefghijklmno yes Static
10.0.20.45 226.200.100.100/32 r1-eth0 no Static
eva#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem statement:
When IPv4/IPv6 prefixes are received in BGP, bgp_update function registers the
nexthop of the route with nexthop tracking module. The BGP route is marked as
valid only if the nexthop is resolved.
Even for EVPN RT-5, route should be marked as valid only if the the nexthop is
resolvable.
Code changes:
1. Add nexthop of EVPN RT-5 for nexthop tracking. Route will be marked as valid
only if the nexthop is resolved.
2. Only the valid EVPN routes are imported to the vrf.
3. When nht update is received in BGP, make sure that the EVPN routes are
imported/unimported based on the route becomes valid/invalid.
Testcases:
1. At rtr-1, advertise EVPN RT-5 with a nexthop 10.100.0.2.
10.100.0.2 is resolved at rtr-2 in default vrf.
At rtr-2, remote EVPN RT-5 should be marked as valid and should be imported into
vrfs.
2. Make the nexthop 10.100.0.2 unreachable at rtr-2
Remote EVPN RT-5 should be marked as invalid and should be unimported from the
vrfs. As this code change deals with EVPN type-5 routes only, other EVPN routes
should be valid.
3. At rtr-2, add a static route to make nexthop 10.100.0.2 reachable.
EVPN RT-5 should again become valid and should be imported into the vrfs.
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
Before the fix:
2019/11/14 19:52:21 BGP: peer 192.168.2.5 deleted from subgroup s4peer
cnt 0 - missing space after s4 before peer
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Previous error was misleading and made it seem like Null0,
reject, or blackhole nexthops on static routes are invalid.
This commit makes it more clear as to why the error is seen.
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
With this code change, we can now filter evpn routes based on RD using the
match statement: "match evpn rd XX"
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Recently Lot of issues are seen in OSPF adjacnecy establishements,
sessions was tear down because of DD Sequence Number mismatch.
adding Debugs to capture Master & slave generated sequence numbers.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Validate that the FEC prefix length is within the allowed limit
(depending on the FEC address family) in order to prevent possible
buffer overflows.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported with tracebacks seen when making multiple bfd timer
changes in frr.conf and applying via frr-reload.py. Found that when
multiple bfd timer changes are made, the same line can be added for
deletion more than once, causing the traceback when the deletion is
performed. This fix verifies the correct line is being appended for
deletion.
Ticket: CM-27233
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The bug:
As part of displaying advertised routes to a peer, in the outer loop, we
iterate through all prefixes in the evpn table. In the inner loop,
we iterate through adj_out of each prefix.
If a prefix which is present in the evpn table is not advertised to a peer,
its corresponding attr == NULL. Checking for this condition is the fix.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
This code is called from the zebra main pthread during shutdown
but the thread event is scheduled via the zebra dplane pthread.
Hence, we should be using the `thread_cancel_async()` API to
cancel the thread event on a different pthread.
This is only ever hit in the rare case that we still have work left
to do on the update queue during shutdown.
Found via zebra crash:
```
(gdb) bt
\#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
\#1 0x00007f4e4d3f7535 in __GI_abort () at abort.c:79
\#2 0x00007f4e4d3f740f in __assert_fail_base (fmt=0x7f4e4d559ee0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x7f4e4d9071d0 "master->owner == pthread_self()",
file=0x7f4e4d906cf8 "lib/thread.c", line=1185, function=<optimized out>) at assert.c:92
\#3 0x00007f4e4d405102 in __GI___assert_fail (assertion=assertion@entry=0x7f4e4d9071d0 "master->owner == pthread_self()", file=file@entry=0x7f4e4d906cf8 "lib/thread.c",
line=line@entry=1185, function=function@entry=0x7f4e4d906b68 <__PRETTY_FUNCTION__.15817> "thread_cancel") at assert.c:101
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
\#5 0x000055b40c291845 in zebra_dplane_shutdown () at zebra/zebra_dplane.c:3274
\#6 0x000055b40c27ee13 in zebra_finalize (dummy=<optimized out>) at zebra/main.c:202
\#7 0x00007f4e4d8d1416 in thread_call (thread=thread@entry=0x7ffcbbc08870) at lib/thread.c:1599
\#8 0x00007f4e4d8a1ef8 in frr_run (master=0x55b40ce35510) at lib/libfrr.c:1024
\#9 0x000055b40c270916 in main (argc=8, argv=0x7ffcbbc08c78) at zebra/main.c:483
(gdb) down
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
1185 assert(master->owner == pthread_self());
(gdb)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
