The adj_process_threeway() api may call the adj_state_change()
api, which may delete the adj struct being examined. Change the
signature so that callers pass a ptr-to-ptr so that they will
see that deletion.
Signed-off-by: Mark Stapp <mjs@cisco.com>
(cherry picked from commit 3eb7d16411)
When mgmt reads configuration from file, it shouldn't add implicit state
data to the candidate datastore. Configuration datastores like candidate
should never store state, otherwise they fail validation.
Fixes#15814
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
(cherry picked from commit 61e8d5e0b9)
CLI show callbacks should be defined in frr_ripd_cli_info instead of
frr_ripd_info, because only the former is loaded by mgmtd and only its
callbacks are getting called for config output.
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
(cherry picked from commit 25d94ec3ee)
The destroy callback must be executed only once on APPLY stage.
Fixes#16528
Signed-off-by: Igor Ryzhov <idryzhov@gmail.com>
(cherry picked from commit 2b12d62e38)
The code is clearly incorrect. After consultation with
the original author this is the decided change.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
(cherry picked from commit c4b4c242ec)
Correct FRR startup counts on a daemon's vty socket to be open when the
parent process exits. The parent process waits for `frr_check_detach()`
to be called by the child before exiting. The problem is when the
`FRR_MANUAL_VTY_START` flag is set the vty socket was not opened but
`frr_check_detach()` was called anyway.
Instead add a bool option for `frr_check_detach()` to be called when the
socket is opened with `frr_vty_serv_start()`, and do so when "manually"
calling said function (i.e., when FRR_MANUAL_VTY_START is set).
The `FRR_MANUAL_VTY_START` flag is only set by mgmtd. The reason we
wait to open the vty socket is so that mgmtd can parse the various
daemon specific config files it has taken over, after the event loop has
started, but before we receive any possible new config from `vtysh`.
fixes#16362
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit be9a6fc0ea)
When enabling "mpls ldp-sync" under "router ospf" ospfd configures
SET_FLAG(ldp_sync_info->flags, LDP_SYNC_FLAG_IF_CONFIG) so internally knowing
that the ldp-sync feature is enabled. However the flag is not cleared when
turning of the feature using "nompls ldp-sync"!
https://github.com/FRRouting/frr/issues/16375
Signed-off-by: Christian Breunig <christian@breunig.cc>
(cherry picked from commit 5a70378a47)
Fix the following crash when pim options are (un)configured on an
non-existent interface.
> r1(config)# int fgljdsf
> r1(config-if)# no ip pim unicast-bsm
> vtysh: error reading from pimd: Connection reset by peer (104)Warning: closing connection to pimd because of an I/O error!
> #0 raise (sig=<optimized out>) at ../sysdeps/unix/sysv/linux/raise.c:50
> #1 0x00007f70c8f32249 in core_handler (signo=11, siginfo=0x7fffff88e4f0, context=0x7fffff88e3c0) at lib/sigevent.c:258
> #2 <signal handler called>
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> #4 0x00007f70c8efdcb5 in nb_callback_modify (context=0x556d00032b60, nb_node=0x556cffeeb9b0, event=NB_EV_APPLY, dnode=0x556d00031670, resource=0x556d00032b48, errmsg=0x7fffff88f710 "", errmsg_len=8192)
> at lib/northbound.c:1538
> #5 0x00007f70c8efe949 in nb_callback_configuration (context=0x556d00032b60, event=NB_EV_APPLY, change=0x556d00032b10, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1888
> #6 0x00007f70c8efee82 in nb_transaction_process (event=NB_EV_APPLY, transaction=0x556d00032b60, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:2016
> #7 0x00007f70c8efd658 in nb_candidate_commit_apply (transaction=0x556d00032b60, save_transaction=true, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1356
> #8 0x00007f70c8efd78e in nb_candidate_commit (context=..., candidate=0x556cffeb0e80, save_transaction=true, comment=0x0, transaction_id=0x0, errmsg=0x7fffff88f710 "", errmsg_len=8192) at lib/northbound.c:1389
> #9 0x00007f70c8f03e58 in nb_cli_classic_commit (vty=0x556d00025a80) at lib/northbound_cli.c:51
> #10 0x00007f70c8f043f8 in nb_cli_apply_changes_internal (vty=0x556d00025a80,
> xpath_base=0x7fffff893bb0 "/frr-interface:lib/interface[name='fgljdsf']/frr-pim:pim/address-family[address-family='frr-routing:ipv4']", clear_pending=false) at lib/northbound_cli.c:178
> #11 0x00007f70c8f0475d in nb_cli_apply_changes (vty=0x556d00025a80, xpath_base_fmt=0x556cfdde9fe0 "./frr-pim:pim/address-family[address-family='%s']") at lib/northbound_cli.c:234
> #12 0x0000556cfdd8298f in pim_process_no_unicast_bsm_cmd (vty=0x556d00025a80) at pimd/pim_cmd_common.c:3493
> #13 0x0000556cfddcf782 in no_ip_pim_ucast_bsm (self=0x556cfde40b20 <no_ip_pim_ucast_bsm_cmd>, vty=0x556d00025a80, argc=4, argv=0x556d00031500) at pimd/pim_cmd.c:4950
> #14 0x00007f70c8e942f0 in cmd_execute_command_real (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, up_level=0) at lib/command.c:1002
> #15 0x00007f70c8e94451 in cmd_execute_command (vline=0x556d00032070, vty=0x556d00025a80, cmd=0x0, vtysh=0) at lib/command.c:1061
> #16 0x00007f70c8e9499f in cmd_execute (vty=0x556d00025a80, cmd=0x556d00030320 "no ip pim unicast-bsm", matched=0x0, vtysh=0) at lib/command.c:1227
> #17 0x00007f70c8f51e44 in vty_command (vty=0x556d00025a80, buf=0x556d00030320 "no ip pim unicast-bsm") at lib/vty.c:616
> #18 0x00007f70c8f53bdd in vty_execute (vty=0x556d00025a80) at lib/vty.c:1379
> #19 0x00007f70c8f55d59 in vtysh_read (thread=0x7fffff896600) at lib/vty.c:2374
> #20 0x00007f70c8f4b209 in event_call (thread=0x7fffff896600) at lib/event.c:2011
> #21 0x00007f70c8ed109e in frr_run (master=0x556cffdb4ea0) at lib/libfrr.c:1217
> #22 0x0000556cfdddec12 in main (argc=2, argv=0x7fffff896828, envp=0x7fffff896840) at pimd/pim_main.c:165
> (gdb) f 3
> #3 0x0000556cfdd9b16d in lib_interface_pim_address_family_unicast_bsm_modify (args=0x7fffff88f130) at pimd/pim_nb_config.c:1910
> 1910 pim_ifp->ucast_bsm_accept =
> (gdb) list
> 1905 case NB_EV_ABORT:
> 1906 break;
> 1907 case NB_EV_APPLY:
> 1908 ifp = nb_running_get_entry(args->dnode, NULL, true);
> 1909 pim_ifp = ifp->info;
> 1910 pim_ifp->ucast_bsm_accept =
> 1911 yang_dnode_get_bool(args->dnode, NULL);
> 1912
> 1913 break;
> 1914 }
> (gdb) p pim_ifp
> $1 = (struct pim_interface *) 0x0
Fixes: 3bb513c399 ("lib: adapt to version 2 of libyang")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
(cherry picked from commit 6952bea5cd)
Additionally, print `errmsg_if_any` in successful debug messages
if non-NULL.
fixes#16386#16043
Signed-off-by: Christian Hopps <chopps@labn.net>
(cherry picked from commit 7afd7d99f2)
1. When the root IS regenerates an LSP, it calls lsp_build() -> lsp_clear_data() to free the TLV memory of the first fragment and all other fragments. If the number of fragments in the regenerated LSP decreases or if no fragmentation is needed, the extra LSP fragments are not immediately deleted. Instead, lsp_seqno_update() -> lsp_purge() is called to set the remaining time to zero and start aging, while also notifying other IS nodes to age these fragments. lsp_purge() usually does not reset lsp->hdr.seqno to zero because the LSP might recover during the aging process.
2. When other IS nodes receive an LSP, they always call process_lsp() -> isis_unpack_tlvs() to allocate TLV memory for the LSP. This does not differentiate whether the received LSP has a remaining lifetime of zero. Therefore, it is rare for an LSP of a non-root IS to have empty TLVs. Of course, if an LSP with a remaining time of zero and already corrupted is received, lsp_update() -> lsp_purge() will be called to free the TLV memory of the LSP, but this scenario is rare.
3. In LFA calculations, neighbors of the root IS are traversed, and each neighbor is taken as a new root to compute the neighbor SPT. During this process, the old root IS will serve as a neighbor of the new root IS, triggering a call to isis_spf_process_lsp() to parse the LSP of the old root IS and obtain its IP vertices and neighboring IS vertices. However, isis_spf_process_lsp() only checks whether the TLVs in the first fragment of the LSP exist, and does not check the TLVs in the fragmented LSP. If the TLV memory of the fragmented LSP of the old root IS has been freed, it can lead to a null pointer access, causing the current crash.
Additionally, for the base SPT, there are only two places where the LSP of the root IS is parsed:
1. When obtaining the UP neighbors of the root IS via spf_adj_list_parse_lsp().
2. When preloading the IP vertices of the root IS via isis_lsp_iterate_ip_reach().
Both of these checks ensure that frag->tlvs is not null, and they do not subsequently call isis_spf_process_lsp() to parse the root IS's LSP. It is very rare for non-root IS LSPs to have empty TLVs unless they are corrupted LSPs awaiting deletion. If it happens, a crash will occur.
The backtrace is as follows:
(gdb) bt
#0 0x00007f3097281fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
#1 0x00007f30973a2972 in core_handler (signo=11, siginfo=0x7ffce66c2870, context=0x7ffce66c2740) at ../lib/sigevent.c:261
#2 <signal handler called>
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
#4 0x000055dfa805743b in isis_spf_loop (spftree=0x55dfa950eee0, root_sysid=0x55dfa950ef6c "") at ../isisd/isis_spf.c:1688
#5 0x000055dfa805784f in isis_run_spf (spftree=0x55dfa950eee0) at ../isisd/isis_spf.c:1808
#6 0x000055dfa8037ff5 in isis_spf_run_neighbors (spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:1259
#7 0x000055dfa803ac17 in isis_spf_run_lfa (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_lfa.c:2300
#8 0x000055dfa8057964 in isis_run_spf_with_protection (area=0x55dfa9477510, spftree=0x55dfa9474440) at ../isisd/isis_spf.c:1827
#9 0x000055dfa8057c15 in isis_run_spf_cb (thread=0x7ffce66c38e0) at ../isisd/isis_spf.c:1889
#10 0x00007f30973bbf04 in thread_call (thread=0x7ffce66c38e0) at ../lib/thread.c:1990
#11 0x00007f309735497b in frr_run (master=0x55dfa91733c0) at ../lib/libfrr.c:1198
#12 0x000055dfa8029d5d in main (argc=5, argv=0x7ffce66c3b08, envp=0x7ffce66c3b38) at ../isisd/isis_main.c:273
(gdb) f 3
#3 0x000055dfa805512b in isis_spf_process_lsp (spftree=0x55dfa950eee0, lsp=0x55dfa94cb590, cost=10, depth=1, root_sysid=0x55dfa950ef6c "", parent=0x55dfa952fca0)
at ../isisd/isis_spf.c:898
898 ../isisd/isis_spf.c: No such file or directory.
(gdb) p te_neighs
$1 = (struct isis_item_list *) 0x120
(gdb) p lsp->tlvs
$2 = (struct isis_tlvs *) 0x0
(gdb) p lsp->hdr
$3 = {pdu_len = 27, rem_lifetime = 0, lsp_id = "\000\000\000\000\000\001\000\001", seqno = 4, checksum = 59918, lsp_bits = 1 '\001'}
The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well.
I have reviewed the process for calculating the SPT based on the LSP, and isis_spf_process_lsp() is the only function that does not check whether the TLVs in the fragments are empty. Therefore, I believe that modifying this function alone should be sufficient. If the TLVs of the current fragment are already empty, we do not need to continue processing subsequent fragments. This is consistent with the behavior where we do not process fragments if the TLVs of the first fragment are empty.
Of course, one could argue that lsp_purge() should still retain the TLV memory, freeing it and then reallocating it if needed. However, this is a debatable point because in some scenarios, it is permissible for the LSP to have empty TLVs. For example, after receiving an SNP (Sequence Number PDU) message, an empty LSP (with lsp->hdr.seqno = 0) might be created by calling lsp_new. If the corresponding LSP message is discarded due to domain or area authentication failure, the TLV memory wouldn't be allocated.
Test scenario:
In an LFA network, importing a sufficient number of static routes to cause LSP fragmentation, and then rolling back the imported static routes so that the LSP is no longer fragmented, can easily result in this issue.
Signed-off-by: zhou-run <zhou.run@h3c.com>
(cherry picked from commit e905177a8c)
Use `vtysh` with this input file:
```
ip route A nh1
ip route A nh2
ip route B nh1
ip route B nh2
```
When running "ip route B" with "nh1" and "nh2", the procedure maybe is:
1) Create the two nexthops: "nh1" and "nh2".
2) Register "nh1" with `static_zebra_nht_register()`, then the states of both
"nh1" and "nht2" are set to "STATIC_SENT_TO_ZEBRA".
3) Register "nh2" with `static_zebra_nht_register()`, then only the routes with
nexthop of "STATIC_START" will be sent to zebra.
So, send the routes with the nexthop of "STATIC_SENT_TO_ZEBRA" to zebra.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 4518d386f7)
During internal testing, when the following sequence is followed, two
non default vrfs end up pointing to the same table-id
- Initially vrf201 has table id 1002
- ip link add dev vrf202 type vrf table 1002
- ip link set dev vrf202 up
- ip link set dev <intrerface> master vrf202
This will ideally lead to zebra exit since this is a misconfiguration as
expected.
However if we perform a restart frr.service at this point, we end up
having two vrfs pointing to same table-id and bad things can happen.
This is because in the interface_vrf_change, we incorrectly check for
vrf_lookup_by_id() to evaluate if there is a misconfig. This works well
for a non restart case but not for the startup case.
root@mlx-3700-20:mgmt:/var/log/frr# sudo vtysh -c "sh vrf"
vrf mgmt id 37 table 1001
vrf vrf201 id 46 table 1002
vrf vrf202 id 59 table 1002 >>>>
Fix: in all cases of misconfiguration, exit zebra as expected.
Ticket :#3970414
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Rajasekar Raja <rajasekarr@nvidia.com>
(cherry picked from commit c77e15710d)
In linux networking stack, the received mpls packets will be processed
by the host *twice*, one as mpls packet, the other as ip packet, so
its ttl decreased 1.
So, we need release the `IP_MINTTL` value if gtsm is enabled, it is for the
mpls packets of neighbor session caused by the command:
`label local advertise explicit-null`.
This change makes the gtsm mechanism a bit deviation.
Fix PR #8313
Signed-off-by: anlan_cs <vic.lan@pica8.com>
(cherry picked from commit 1919df3a64)
When a neighbor connection is disconnected, it may trigger LSP re-generation as a timer task, but this process may be delayed. As a result, the list of neighbors in area->adjacency_list may be inconsistent with the neighbors in lsp->tlvs->oldstyle_reach/extended_reach. For example, the area->adjacency_list may lack certain neighbors even though they are present in the LSP. When computing SPF, the call to isis_spf_build_adj_list() generates the spftree->sadj_list, which reflects the real neighbors in the area->adjacency_list. However, in the case of LAN links, spftree->sadj_list may include additional pseudo neighbors.
The pre-loading of tents through the call to isis_spf_preload_tent involves two steps:
1. isis_spf_process_lsp() is called to generate real neighbor vertices based on the root LSP and pseudo LSP.
2. isis_spf_add_local() is called to add corresponding next hops to the vertex->Adj_N list for the real neighbor vertices.
In the case of LAN links, the absence of corresponding real neighbors in the spftree->sadj_list prevents the execution of the second step. Consequently, the vertex->Adj_N list for the real neighbor vertices lacks corresponding next hops. This leads to a null pointer access when isis_lfa_compute() is called to calculate LFA.
As for P2P links, since there are no pseudo neighbors, only the second step is executed, which does not create real neighbor vertices and therefore does not encounter this issue.
The backtrace is as follows:
(gdb) bt
#0 0x00007fd065277fe1 in raise () from /lib/x86_64-linux-gnu/libpthread.so.0
#1 0x00007fd065398972 in core_handler (signo=11, siginfo=0x7ffc5c0636b0, context=0x7ffc5c063580) at ../lib/sigevent.c:261
#2 <signal handler called>
#3 0x00005564d82f8408 in isis_lfa_compute (area=0x5564d8b143f0, circuit=0x5564d8b21d10, spftree=0x5564d8b06bf0, resource=0x7ffc5c064410) at ../isisd/isis_lfa.c:2134
#4 0x00005564d82f8d78 in isis_spf_run_lfa (area=0x5564d8b143f0, spftree=0x5564d8b06bf0) at ../isisd/isis_lfa.c:2344
#5 0x00005564d8315964 in isis_run_spf_with_protection (area=0x5564d8b143f0, spftree=0x5564d8b06bf0) at ../isisd/isis_spf.c:1827
#6 0x00005564d8315c15 in isis_run_spf_cb (thread=0x7ffc5c064590) at ../isisd/isis_spf.c:1889
#7 0x00007fd0653b1f04 in thread_call (thread=0x7ffc5c064590) at ../lib/thread.c:1990
#8 0x00007fd06534a97b in frr_run (master=0x5564d88103c0) at ../lib/libfrr.c:1198
#9 0x00005564d82e7d5d in main (argc=5, argv=0x7ffc5c0647b8, envp=0x7ffc5c0647e8) at ../isisd/isis_main.c:273
(gdb) f 3
#3 0x00005564d82f8408 in isis_lfa_compute (area=0x5564d8b143f0, circuit=0x5564d8b21d10, spftree=0x5564d8b06bf0, resource=0x7ffc5c064410) at ../isisd/isis_lfa.c:2134
2134 ../isisd/isis_lfa.c: No such file or directory.
(gdb) p vadj_primary
$1 = (struct isis_vertex_adj *) 0x0
(gdb) p vertex->Adj_N->head
$2 = (struct listnode *) 0x0
(gdb) p (struct isis_vertex *)spftree->paths->l.list->head->next->next->next->next->data
$8 = (struct isis_vertex *) 0x5564d8b5b240
(gdb) p $8->type
$9 = VTYPE_NONPSEUDO_TE_IS
(gdb) p $8->N.id
$10 = "\000\000\000\000\000\002"
(gdb) p $8->Adj_N->count
$11 = 0
(gdb) p (struct isis_vertex *)spftree->paths->l.list->head->next->next->next->next->next->data
$12 = (struct isis_vertex *) 0x5564d8b73dd0
(gdb) p $12->type
$13 = VTYPE_NONPSEUDO_TE_IS
(gdb) p $12->N.id
$14 = "\000\000\000\000\000\003"
(gdb) p $12->Adj_N->count
$15 = 0
(gdb) p area->adjacency_list->count
$16 = 0
The backtrace provided above pertains to version 8.5.4, but it seems that the same issue exists in the code of the master branch as well.
The scenario where a vertex has no next hop is normal. For example, the "clear isis neighbor" command invokes isis_vertex_adj_del() to delete the next hop of a vertex. Upon reviewing all the instances where the vertex->Adj_N list is used, I found that only isis_lfa_compute() lacks a null check. Therefore, I believe that modifying this part will be sufficient. Additionally, the vertex->parents list for IP vertices is guaranteed not to be empty.
Test scenario:
Setting up LFA for LAN links and executing the "clear isis neighbor" command easily reproduces the issue.
Signed-off-by: zhou-run <zhou.run@h3c.com>
(cherry picked from commit a970bb51b5)
When receiving a hello packet, if the neighbor state transitions directly from a non-ISIS_ADJ_UP state (such as ISIS_ADJ_INITIALIZING) to ISIS_ADJ_DOWN state, the neighbor entry cannot be deleted. If the neighbor is removed or the neighbor's System ID changes, it may result in memory leakage in the neighbor entry.
Test Scenario:
LAN link between Router A and Router B is established. Router A does not configure neighbor authentication, while Router B is configured with neighbor authentication. When the neighbor entry on Router B ages out, the neighbor state on Router A transitions to INIT. If Router B is then removed, the neighbor state on Router A transitions to DOWN and persists.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
fix frrbot styling issues found.
fix frrbot styling issues found.
Signed-off-by: zhou-run <166502045+zhou-run@users.noreply.github.com>
(cherry picked from commit 5009f7539a)
When the packet is malformed it can use whatever values it wants. Let's check
what the real data we have in a stream instead of relying on malformed values.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 9929486d6b)
RFC 8212 defines leak prevention for eBGP peers, but BGP-OAD defines a new
peering type One Administrative Domain (OAD), where multiple ASNs could be used
inside a single administrative domain. OAD allows sending non-transitive attributes,
so this prevention should be relaxed too.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
(cherry picked from commit 3b98ddf501)
add some match in route map rules
add some set unset bgp access path list
add another prefix for better tests discrimination
update expected results
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
(cherry picked from commit 0df2e14997)
whith the following config
router bgp 65001
no bgp ebgp-requires-policy
neighbor 192.168.1.2 remote-as external
neighbor 192.168.1.2 timers 3 10
!
address-family ipv4 unicast
neighbor 192.168.1.2 route-map r2 in
exit-address-family
exit
!
bgp as-path access-list FIRST seq 5 permit ^65
bgp as-path access-list SECOND seq 5 permit 2$
!
route-map r2 permit 6
match ip address prefix-list p2
set as-path exclude as-path-access-list SECOND
exit
!
route-map r2 permit 10
match ip address prefix-list p1
set as-path exclude 65003
exit
!
route-map r2 permit 20
match ip address prefix-list p3
set as-path exclude all
exit
making some
no bgp as-path access-list SECOND permit 2$
bgp as-path access-list SECOND permit 3$
clear bgp *
no bgp as-path access-list SECOND permit 3$
bgp as-path access-list SECOND permit 2$
clear bgp *
will induce some crashes
thus we rework the links between aslists and aspath_exclude
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
(cherry picked from commit 094dcc3cda)
