the snmp tests are using zebra.conf to setup the
address that they are binding to and immediately
after that they are starting snmpd. If snmpd
starts up *before* zebra has installed the address
the bind on the address will fail. Causing the entire
test to fail. Modify the snmpd.conf for all our
snmp tests to bind to all addresses. Things still
work and we no longer have an issue.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
https://www.rfc-editor.org/rfc/rfc2042.html
says: 255 reserved for development
In FRR, 255 is kinda used too BGP_ATTR_VNC, even more we allow setting 255 in CLI.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Add a new topotest `isis_srv6_topo1` for verifying SRv6 functionalities
in IS-IS (RFC 9352).
This topotest consists of nine tests:
* Network convergence after applying SRv6 configuration
* Disable SRv6 Locator on zebra on r1
* Enable SRv6 Locator on zebra on r1
* Disable SRv6 Locator on ISIS on r1
* Enable SRv6 Locator on ISIS on r1
* Disable SRv6 on ISIS on r1
* Enable SRv6 on ISIS on r1
* Disable SRv6 on zebra on r1
* Enable SRv6 on zebra on r1
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Update IS-IS fuzz test to match corrected output after the introduction
of SRv6-related TLVs.
The update was performed using wuschl [1] like this:
$ wuschl rebuild tests/isisd/test_fuzz_isis_tlv
$ gzip -9 tests/isisd/test_fuzz_isis_tlv_tests.h
[1] https://pypi.org/project/wuschl/
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add CLI command and functions to configure the interface used for
installing SRv6 SIDs into Linux data plane
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
The function `sid_exist` verifies if a given SRv6 SID has already been
allocated for a given IS-IS area. This commit extends `sid_exist` to
also consider adjacency SIDs when checking for the existence of the SID.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
An SRv6 adjacency SID is a SID that is associated with a particular
adjacency. Adjacency SIDs are advertised using the SRv6 End.X SID
Sub-TLV (RFC 9352 section #8.1) or SRv6 LAN End.X SID Sub-TLV (RFC 9352
section #8.2).
This commit defines the following Adj SIDs management functions:
* srv6_endx_sid_add_single: add a new SRv6 Adjacency SID
* srv6_endx_sid_del: delete an SRv6 Adjacency SID
* isis_srv6_endx_sid_find: lookup SRv6 End.X SID by type
It also attaches some callbacks to the hooks isis_adj_state_change_hook,
isis_adj_ip_enabled_hook, isis_adj_ip_disabled_hook, which are
responsible for installing/removing an SRv6 Adjacency SID automatically
when the state of an IS-IS adjacency changes.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
An SRv6 adjacency SID is a SID that is associated with a particular
adjacency. Adjacency SIDs are advertised using the SRv6 End.X SID
Sub-TLV (RFC 9352 section #8.1) or SRv6 LAN End.X SID Sub-TLV (RFC 9352
section #8.2).
This commit defines a data structure `srv6_adjacency` for storing
information about an SRv6 Adjacency SID. This data structure will be
used to support SRv6 Adjacency SIDs functionalities in future commits.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
We need to allocate memory SRv6 SID Structure Sub-Sub-TLV in
isis_srv6.c. MTYPE_ISIS_SUBSUBTLV is statically defined in isis_tlvs.c
and therefore is not visible in isis_srv6.c. Let's make
MTYPE_ISIS_SUBSUBTLV non-static to provide visibility to the external
world..
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV unpack function to unpack the
SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV pack function to pack the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV codepoints
(defined in "IS-IS Sub-TLVs for TLVs Advertising Neighbor Information"
IANA registry). These codepoints will be used in future commits to
pack/unpack corresponding Sub-TLVs.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV format function to show the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
SRv6 End.X SID Sub-TLV (RFC 9352 section #8.1) and SRv6 LAN End.X SID
Sub-TLV (RFC 9352 section #8.2) contain a `flag` field. Currently, three
flags are defined:
* B-Flag: Backup flag
* S-Flag: Set flag
* P-Flag: Persistent flag
This commit defines three constants representing these flags.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the Extended IS Reachability TLV copy function to copy the SRv6
End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV, if present.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add SRv6 End.X SID Sub-TLV and SRv6 LAN End.X SID Sub-TLV to the
Extended IS Reachability Sub-TLVs data structure and perform proper
initialization/free when the Sub-TLVs data structure is
allocated/destroyed.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a data structure to represent an SRv6 LAN End.X SID Sub-TLV as per
RFC 9352 section #8.2.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a data structure to represent an SRv6 End.X SID Sub-TLV as per
RFC 9352 section #8.1.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add copyright claim for "IS-IS Extensions to Support SRv6" (RFC 9352)
to isis_tlvs.c and isis_tlvs.h.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
According to RFC 9352 section #5, the SRv6 Locators associated with
algorithms 0 and 1 should be also advertised in a Prefix Reachability
TLV (236 or 237) to allow legacy routers (i.e., routers that do not
support SRv6) installing a forwarding entry for algorithms 0 and 1 SRv6
traffic.
This commits extend IS-IS to advertise SRv6 Locators in IPv6
Reachability TLV.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 SID Structure Sub-Sub-TLV (RFC 9352
section #9) to advertise the structure of a specific SRv6 End SID passed
as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 End SID TLV (RFC 9352 section #7.2) to
advertise a specific SRv6 End SID passed as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to build an SRv6 Locator TLV (RFC 9352 section #7.1) to
advertise a specific SRv6 Locator passed as an argument.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 SID Structure Sub-Sub-TLV with
information from an SRv6 SID (RFC 9352 section #9).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 End SID Sub-TLV with information from
an SRv6 End SID (RFC 9352 section #7.2).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Add a function to fill in an SRv6 Locator TLV with information from an
SRv6 locator (RFC 9352 section #7.1).
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
