1) When programming a nhg id to the kernel we had no debug of that
is what we are doing.
2) Add debugs to all nexthop information to allow us to follow
which prefix we are talking about. This is especially
useful when dealing with a large number of routes and
you want to grep out one or two too see what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that any weight associated with the next hop is installed for
IPv4 routes with IPv6 next hops too.
Updates: lib, zebra: Allow for installation of a weighted nexthop
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Add to the ZEBRA_INTERFACE_BFD_DEST_UPDATE code path
in zebra_ptm_redistribute.c the missing c-bit data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem: While zebra going down, rmap update thread is being called as part of
timer event. This make zebra to crash.
RCA: At this time route_map_master_hash is made to 0 by sig int handler.
This is causing Zebrad to crash while executing rmap update thread
Fix: As part of SIGINT handler, before calling routemap_finish,
thread off any routemap update scheduled at that point and make sure that
it wont get scheduled again by making the timeout as 0.
Signed-off-by: Saravanan K <saravanank@vmware.com>
The return type of is_selfroute function is changed from int to bool.
Also remove the redundant invoking of the is_selfroute function in the
calling function netlink_route_change_read_unicast
Fixes: https://github.com/FRRouting/frr/issues/5984
Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
Readd the special MAC that represents the flood (head-end replication) entry
for EVPN-VxLAN upon getting a delete notification for it.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Chirag Shah <chirag@cumulusnetworks.com>
Ticket: CM-25797
Ticket: CM-26238
Testing Done:
1. evpn-min, evpn-smoke - results summarized in CM-25798
add debug trace in specific neigh request send api
to help debug an issue where synchronous response parse
returns with NLMSG_DONE where there is no ipv6 neigh received.
the count value is set to 1 because the request contained
a spcific neigh.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Memory leak found where ipv6 global prefixes added to the router
advertisement prefix lists were not deleted when the process was
killed.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a common api that formats a time interval into a string
with different output for short and longer intervals. We do
this in several places, for cli/ui output.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Upper level clients ask for default routes of a particular family
This change ensures that they only receive the family that they
have asked for.
Discovered when testing in ospf `default-information originate`
=================================================================
==246306==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fffffffa2e8 at pc 0x7ffff73c44e2 bp 0x7fffffffa090 sp 0x7fffffffa088
READ of size 16 at 0x7fffffffa2e8 thread T0
#0 0x7ffff73c44e1 in prefix_copy lib/prefix.c:310
#1 0x7ffff741c0aa in route_node_lookup lib/table.c:255
#2 0x5555556cd263 in ospf_external_info_delete ospfd/ospf_asbr.c:178
#3 0x5555556a47cc in ospf_zebra_read_route ospfd/ospf_zebra.c:852
#4 0x7ffff746f5d8 in zclient_read lib/zclient.c:3028
#5 0x7ffff742fc91 in thread_call lib/thread.c:1549
#6 0x7ffff7374642 in frr_run lib/libfrr.c:1093
#7 0x5555555bfaef in main ospfd/ospf_main.c:235
#8 0x7ffff70a2bba in __libc_start_main ../csu/libc-start.c:308
#9 0x5555555bf499 in _start (/usr/lib/frr/ospfd+0x6b499)
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch does two things:
1) Ensure the decoding of stream data between pim <-> zebra is properly
decoded and we don't read beyond the end of the stream.
2) In zebra when we are freeing memory alloced ensure that we
actually have memory to delete before we do so.
Ticket: CM-27055
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code is effectively dead code. SO_PEERCRED is a getsockopt
call not *setsockopt* call. Additionally we are not doing
anything with the failed setsockopt call at all.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
this flag can be used when one routing daemon wants to force his route
to be injected prioritary with other routes, including selected routes.
for that, do not forget to update the new_selected pointer in the zebra
nexthop tracking algorithm.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The handlers for a couple of the main LSP-oriented zapi
messages explicitly limited themselves to a single out-label.
Allow multiple labels if the sender ... sends them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We made the decision to explicitly trust kernel and system routes
of every other type with 058c16b7e2.
So, we should trust directly connected routes the same way, assuming
the interface exists.
Old Behavior:
K 2.2.2.1/32 [0/0] is directly connected, unknown inactive, 00:00:39
New Behavior:
K>* 2.2.2.1/32 [0/0] is directly connected, test1, 00:00:03
As a bonus, this fixes the issues we were seeing with not removing
directly connected routes of certain interface types when
those interfaces go down/are deleted.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
It's been a year search and destroy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When a client connects to zebra with GR capabilities and
then restarts, it might disconnect again even before hello is
sent leading zebra cores.
GR should be supported only for dynamic neighbor who are capable
of restarting.
Signed-off-by: Santosh P K <sapk@vmware.com>
Somewhat gnarly code flow here that might be leaking memory - can't tell
if it's a test artifact or not, but in any case this reduces the
situations in which we need to alloc a block.
And we don't need to check XCALLOC for success...
And we don't need to null check before XFREE...
Or set XFREE'd pointers to NULL...
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add in a few missing stub route-advert functions; these are
needed to build frr with v6 route adverts disabled.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
As part of checksum calculation for a received packet we were
comparing the checksum returned from in_cksum. Typically
when we calculate the checksum the value stored in the checksum
must be all 0's. Store the received checksum and then set
the checksum to 0 and then compare.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In several places we would send debug messages for failure situations
that really should be errors.
Signed-off-by: Donald Sharpd <sharpd@cumulusnetworks.com>
Using SO_BROADCAST, in the linux kernel, requires a uint32_t to be passed
in for all SOL_SOCKET calls. Modify code to use it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
RFC 4861 states that ipv6 RA messages sent out an interface should
contain all global ipv6 addresses on that interface. This fix adds
that capability. To override the default flags and timer settings
for a particular prefix, the existing "ipv6 nd prefix ..." command
should be used via vtysh under the appropriate interface.
Ticket: CM-20363
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Today vtysh can show the ip/ip6 routes through several commands:
- show_route_cmd
- show_route_detail_cmd
- show_route_summary_cmd
- show_route_table_cmd
- show_route_table_vrf_cmd
- show_route_all_table_vrf_cmd
Each command has its own set of filter rules:
- show_route_cmd can filter by vrf, protocol, tag, ... but not by table
- show_route_table_cmd always filter by table
- show_route_table_vrf_cmd always filter by table and can filter by vrf
too
- show_route_all_table_vrf_cmd show all route in any table for a vrf (or
all)
To reduce the number of commands and provide a possibility to filter by
any key add possibility for the show_route_cmd to filter by table with a
specific value or all to get route in all tables.
Then the show_route_table_cmd, show_route_table_vrf_cmd and
show_route_all_table_vrf_cmd functions can be removed as they are covered
by the generic show_route_cmd function.
It is to be noted that when zebra is started by default, it is possible
to execute show ip route command with both vrf and table parameters,
whereas before the command was not displayed. This is due to the fact
that this combination is only permitted when zebra is launched with vrf
network namespace mode. There, if zebra is configured with vrf-lite
backend, then a vty error message informs the user that the combination
of both table and vrf is not possible.
Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com>
The existing behavior is when a remote VTEP is deleted,
its associatedneighbor (arp) and MAC entries are removed from
zebra database and do not wait for explicit type-2 route
withdraw from originating VTEP.
Remote type-2 route delete checks if VTEP is present before
removing the entry.
The behavior works fine when all evpn routes points to the
same nexthop as the VTEP IP.
In MLAG topology with advertise-pip, self type-2 and type-5 routes
are advertised with individual VTEP IP as nexthop ip for the route.
When a new VNI is created, it is assigned individual IP as tunnel-ip
then it transition to anycast IP (of the MLAG). During the transition,
type-3 route (VTEP delete) withdraw is sent for the individual IP.
The remote VTEP delete should not trigger to remove evpn routes pointing
to VTEP IP. Instead the route will be removed via explicit withdraw.
Ticket:CM-27752
Reviewed By:CCR-9722
Testing Done:
In evpn with MLAG deployment with advertise-pip and advertise-svi-ip
enabled, validated remote vtep delete does not remove self type-2 routes
from zebra DB. Upon explicit type-2 withdraw routes are removed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use a hash walker/iterator instead of a temporary list to
show zebra's nexthop-groups/nexthop-hash-entries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The top variable has already been derefed by the time we get
to the test to see if it is non-NULL. No need to check it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Nexthop groups as a whole do not make sense to have a vrf'ness
As that you can have a arbitrary number of nexthops that point
to separate vrf's.
Modify the code to make this distinction, by clearly delineating
the line between the nhg and the nexthop a bit better.
Nexthop groups having a vrf_id only make sense if you are using
network namespaces to represent them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra implementation of nexthop groups has
two types of nexthops groups currently. Singleton
objects which have afi's and combined nexthop groups
that do not. Specifically call this out in the code
to make this distinction.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
Add a null check in `handle_recursive_depend()` so it
doesn't try to add a NULL pointer to the RB tree.
This was found with clang SA.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were not resetting the nexthop pointer to NULL for each
new read of a nexthop from the zapi route. On the chance we
get a nexthop that does not have a proper type, we will not
create a new nexthop and update that pointer, thus it still
has the last valid one and will create a group with two
pointers to the same nexthop.
Then when it enters any code that iterates the group, it loops
endlessly.
This was found with zapi fuzzing.
```
0x00007f728891f1c3 in jhash2 (k=<optimized out>, length=<optimized out>, initval=12183506) at lib/jhash.c:138
0x00007f728896d92c in nexthop_hash (nexthop=<optimized out>) at lib/nexthop.c:563
0x00007f7288979ece in nexthop_group_hash (nhg=<optimized out>) at lib/nexthop_group.c:394
0x0000000000621036 in zebra_nhg_hash_key (arg=<optimized out>) at zebra/zebra_nhg.c:356
0x00007f72888ec0e1 in hash_get (hash=<optimized out>, data=0x7ffffb94aef0, alloc_func=0x0) at lib/hash.c:138
0x00007f72888ee118 in hash_lookup (hash=0x7f7288de2f10, data=0x7f728908e7fc) at lib/hash.c:183
0x0000000000626613 in zebra_nhg_find (nhe=0x7ffffb94b080, id=0, nhg=0x6020000032d0, nhg_depends=0x0, vrf_id=<optimized out>,
afi=<optimized out>, type=<optimized out>) at zebra/zebra_nhg.c:541
0x0000000000625f39 in zebra_nhg_rib_find (id=0, nhg=<optimized out>, rt_afi=AFI_IP) at zebra/zebra_nhg.c:1126
0x000000000065f953 in rib_add_multipath (afi=AFI_IP, safi=<optimized out>, p=0x7ffffb94b370, src_p=0x0, re=0x6070000013d0,
ng=0x7f728908e7fc) at zebra/zebra_rib.c:2616
0x0000000000768f90 in zread_route_add (client=0x61f000000080, hdr=<optimized out>, msg=<optimized out>, zvrf=<optimized out>)
at zebra/zapi_msg.c:1596
0x000000000077c135 in zserv_handle_commands (client=<optimized out>, msg=0x61b000000780) at zebra/zapi_msg.c:2636
0x0000000000575e1f in main (argc=<optimized out>, argv=<optimized out>) at zebra/main.c:309
```
```
(gdb) p *nhg->nexthop
$4 = {next = 0x5488e0, prev = 0x5488e0, vrf_id = 16843009, ifindex = 16843009, type = NEXTHOP_TYPE_IFINDEX, flags = 8 '\b', {gate = {ipv4 = {s_addr = 0},
ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}},
bh_type = BLACKHOLE_UNSPEC}, src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0,
0}, __u6_addr32 = {0, 0, 0, 0}}}}, rmap_src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0,
0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}}, resolved = 0x0, rparent = 0x0, nh_label_type = ZEBRA_LSP_NONE, nh_label = 0x0, weight = 1 '\001'}
(gdb) quit
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Since we are using a UNIQUE RB tree, we need to handle the
case of adding in a duplicate entry into it.
The list API code returns NULL when a successfull add
occurs, so lets pull that handling further up into
the connected handlers. Then, free the allocated
connected struct if it is a duplicate.
This is a pretty unlikely situation to happen.
Also, pull up the RB handling of _del RB API as well.
This was found with the zapi fuzzing code.
```
==1052840==
==1052840== 200 bytes in 5 blocks are definitely lost in loss record 545 of 663
==1052840== at 0x483BB1A: calloc (vg_replace_malloc.c:762)
==1052840== by 0x48E1008: qcalloc (memory.c:110)
==1052840== by 0x44D357: nhg_connected_new (zebra_nhg.c:73)
==1052840== by 0x44D300: nhg_connected_tree_add_nhe (zebra_nhg.c:123)
==1052840== by 0x44FBDC: depends_add (zebra_nhg.c:1077)
==1052840== by 0x44FD62: depends_find_add (zebra_nhg.c:1090)
==1052840== by 0x44E46D: zebra_nhg_find (zebra_nhg.c:567)
==1052840== by 0x44E1FE: zebra_nhg_rib_find (zebra_nhg.c:1126)
==1052840== by 0x45AD3D: rib_add_multipath (zebra_rib.c:2616)
==1052840== by 0x4977DC: zread_route_add (zapi_msg.c:1596)
==1052840== by 0x49ABB9: zserv_handle_commands (zapi_msg.c:2636)
==1052840== by 0x428B11: main (main.c:309)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Adding header files changes where structure to hold
received graceful restart info from client is defined.
Also there are changes for show commands where exisiting
commands are extended.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Add a config that disables use of kernel-level nexthop ids.
Currently, zebra always uses nexthop ids if the kernel supports
them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we are receiving a kernel route, with an admin distance
of 255 we are not marking it as installed. This route
should be marked as installed.
New behavior:
K>* 4.5.7.0/24 [255/8192] via 192.168.209.1, enp0s8, 00:10:14
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit: 0eb97b860d
Removed this chunk of code in zebra:
- if (ifp)
- if (connected_is_unnumbered(ifp))
- SET_FLAG(nexthop->flags, NEXTHOP_FLAG_ONLINK);
Effectively if we had a NEXTHOP_TYPE_IPV4_IFINDEX we would
auto set the onlink flag. This commit dropped it for some reason.
Add it back in an intelligent manner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
My previous patch to fix a memory leak, caused by not properly freeing
the iptable iface list on stream parse failure, created/exposed a heap
use after free because we were not doing a deep copy
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
With recent changes to the lib nexthop_group
APIs (e1f3a8eb19), we are making
new assumptions that this should be adding a single nexthop
to a group, not a list of nexthops.
This broke the case of a recursive nexthop resolving to a group:
```
D> 2.2.2.1/32 [150/0] via 1.1.1.1 (recursive), 00:00:09
* via 1.1.1.1, dummy1 onlink, 00:00:09
via 1.1.1.2 (recursive), 00:00:09
* via 1.1.1.2, dummy2 onlink, 00:00:09
D> 3.3.3.1/32 [150/0] via 2.2.2.1 (recursive), 00:00:04
* via 1.1.1.1, dummy1 onlink, 00:00:04
K * 10.0.0.0/8 [0/1] via 172.27.227.148, tun0, 00:00:21
```
This group can instead just directly point to the nh that was passed.
Its only being used for a lookup (the memory gets copied and used
elsewhere if the nexthop is not found).
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the nexthop_copy/nexthop_dup APIs more consistent by
adding a secondary, non-recursive, version of them. Before,
it was inconsistent whether the APIs were expected to copy
recursive info or not. Make it clear now that the default is
recursive info is copied unless the _no_recurse() version is
called. These APIs are not heavily used so it is fine to
change them for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
cb86eba3ab was causing zebra to crash
when handling a nexthop group that had a nexthop which was recursively resolved.
Steps to recreate:
!
nexthop-group red
nexthop 1.1.1.1
nexthop 1.1.1.2
!
sharp install routes 8.8.8.1 nexthop-group red 1
=========================================
==11898== Invalid write of size 8
==11898== at 0x48E53B4: _nexthop_add_sorted (nexthop_group.c:254)
==11898== by 0x48E5336: nexthop_group_add_sorted (nexthop_group.c:296)
==11898== by 0x453593: handle_recursive_depend (zebra_nhg.c:481)
==11898== by 0x451CA8: zebra_nhg_find (zebra_nhg.c:572)
==11898== by 0x4530FB: zebra_nhg_find_nexthop (zebra_nhg.c:597)
==11898== by 0x4536B4: depends_find (zebra_nhg.c:1065)
==11898== by 0x453526: depends_find_add (zebra_nhg.c:1087)
==11898== by 0x451C4D: zebra_nhg_find (zebra_nhg.c:567)
==11898== by 0x4519DE: zebra_nhg_rib_find (zebra_nhg.c:1126)
==11898== by 0x452268: nexthop_active_update (zebra_nhg.c:1729)
==11898== by 0x461517: rib_process (zebra_rib.c:1049)
==11898== by 0x4610C8: process_subq_route (zebra_rib.c:1967)
==11898== Address 0x0 is not stack'd, malloc'd or (recently) free'd
Zebra crashes because we weren't handling the case of the depend nexthop
being recursive.
For this case, we cannot make the function more efficient. A nexthop
could resolve to a group of any size, thus we need allocs/frees.
To solve this and retain the goal of the original patch, we separate out the
two cases so it will still be more efficient if the nexthop is not recursive.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The only two safi's that are usable for zebra for installation
of routes into the rib are SAFI_UNICAST and SAFI_MULTICAST.
The acceptance of other safi's is causing a memory leak:
Direct leak of 56 byte(s) in 1 object(s) allocated from:
#0 0x5332f2 in calloc (/usr/lib/frr/zebra+0x5332f2)
#1 0x7f594adc29db in qcalloc /opt/build/frr/lib/memory.c:110:27
#2 0x686849 in zebra_vrf_get_table_with_table_id /opt/build/frr/zebra/zebra_vrf.c:390:11
#3 0x65a245 in rib_add_multipath /opt/build/frr/zebra/zebra_rib.c:2591:10
#4 0x7211bc in zread_route_add /opt/build/frr/zebra/zapi_msg.c:1616:8
#5 0x73063c in zserv_handle_commands /opt/build/frr/zebra/zapi_msg.c:2682:2
Collapse
Sequence of events:
Upon vrf creation there is a zvrf->table[afi][safi] data structure
that tables are auto created for. These tables only create SAFI_UNICAST
and SAFI_MULTICAST tables. Since these are the only safi types that
are zebra can actually work on. zvrf data structures also have a
zvrf->otable data structure that tracks in a RB tree other tables
that are created ( say you have routes stuck in any random table
in the 32bit route table space in linux ). This data structure is
only used if the lookup in zvrf->table[afi][safi] fails.
After creation if we pass a route down from an upper level protocol
that has non unicast or multicast safi *but* has the actual
tableid of the vrf we are in, the initial lookup will always
return NULL leaving us to look in the otable. This will create
a data structure to track this data.
If after this event you pass in a second route with the same
afi/safi/table_id, the otable will be created and attempted
to be stored, but the RB_TREE_UNIQ data structure when it sees
this will return the original otable returned and the lookup function
zebra_vrf_get_table_with_table_id will just drop the second otable.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
==25402==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x533302 in calloc (/usr/lib/frr/zebra+0x533302)
#1 0x7fee84cdc80b in qcalloc /home/qlyoung/frr/lib/memory.c:110:27
#2 0x5a3032 in create_label_chunk /home/qlyoung/frr/zebra/label_manager.c:188:3
#3 0x5a3c2b in assign_label_chunk /home/qlyoung/frr/zebra/label_manager.c:354:8
#4 0x5a2a38 in label_manager_get_chunk /home/qlyoung/frr/zebra/label_manager.c:424:9
#5 0x5a1412 in hook_call_lm_get_chunk /home/qlyoung/frr/zebra/label_manager.c:60:1
#6 0x5a1412 in lm_get_chunk_call /home/qlyoung/frr/zebra/label_manager.c:81:2
#7 0x72a234 in zread_get_label_chunk /home/qlyoung/frr/zebra/zapi_msg.c:2026:2
#8 0x72a234 in zread_label_manager_request /home/qlyoung/frr/zebra/zapi_msg.c:2073:4
#9 0x73150c in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2688:2
When creating label chunk that has a specified base, we eventually are
calling assign_specific_label_chunk. This function finds the appropriate
list node and deletes it from the lbl_mgr.lc_list but since
the function uses list_delete_node() the deletion function that is
specified for lbl_mgr.lc_list is not called thus dropping the memory.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Previous patches introduced various issues:
- Removal of stream_free() to fix double free caused memleak
- Patch for memleak was incomplete
This should fix it hopefully.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The existing usage of the rta_nest and addattr_nest
functions were not adding the NLA_F_NESTED flag
to the type. As such the new nexthop functionality was
actually looking for this flag, while apparently older
code did not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
There's confusion between the nexthop-group configuration and a
zebra-specific show command. For now, make the zebra show
command string RIB-specific until we're able to unify these
paths.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
=================================================================
==3058==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x7f5bf3ef7477 bp 0x7ffdfaa20d40 sp 0x7ffdfaa204c8 T0)
==3058==The signal is caused by a READ memory access.
==3058==Hint: address points to the zero page.
#0 0x7f5bf3ef7476 in memcpy /build/glibc-OTsEL5/glibc-2.27/string/../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:134
#1 0x4d158a in __asan_memcpy (/usr/lib/frr/zebra+0x4d158a)
#2 0x7f5bf58da8ad in stream_put /home/qlyoung/frr/lib/stream.c:605:3
#3 0x67d428 in zsend_ipset_entry_notify_owner /home/qlyoung/frr/zebra/zapi_msg.c:851:2
#4 0x5c70b3 in zebra_pbr_add_ipset_entry /home/qlyoung/frr/zebra/zebra_pbr.c
#5 0x68e1bb in zread_ipset_entry /home/qlyoung/frr/zebra/zapi_msg.c:2465:4
#6 0x68f958 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#7 0x55666d in main /home/qlyoung/frr/zebra/main.c:309:2
#8 0x7f5bf3e5db96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#9 0x4311d9 in _start (/usr/lib/frr/zebra+0x4311d9)
the ipset->backpointer was NULL as that the hash lookup failed to find
anything. Prevent this crash from happening.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The decoding of _add and _del functions is practically identical
do a bit of work and make them so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
=================================================================
==13611==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffe9e5c8694 at pc 0x0000004d18ac bp 0x7ffe9e5c8330 sp 0x7ffe9e5c7ae0
WRITE of size 17 at 0x7ffe9e5c8694 thread T0
#0 0x4d18ab in __asan_memcpy (/usr/lib/frr/zebra+0x4d18ab)
#1 0x7f16f04bd97f in stream_get2 /home/qlyoung/frr/lib/stream.c:277:2
#2 0x6410ec in zebra_vxlan_remote_macip_del /home/qlyoung/frr/zebra/zebra_vxlan.c:7718:4
#3 0x68fa98 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#4 0x556add in main /home/qlyoung/frr/zebra/main.c:309:2
#5 0x7f16eea3bb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#6 0x431249 in _start (/usr/lib/frr/zebra+0x431249)
This decode is the result of a buffer overflow because we are
not checking ipa_len.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The linux kernel will occassionally send RTM_GETNEIGH when
it expects user space to help in resolution of an ARP entry.
See linux kernel commit:
commit 3e25c65ed085b361cc91a8f02e028f1158c9f255
Author: Tim Gardner <tim.gardner@canonical.com>
Date: Thu Aug 29 06:38:47 2013 -0600
net: neighbour: Remove CONFIG_ARPD
Since we don't care about this, let's just safely ignore this
message for the moment. I imagine in the future we might
care when we implement neighbor managment in the system.
Reported By: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There may be logic to prevent this ever happening earlier in the network
read path, but it doesn't hurt to double check it here, because clearly
deeper paths rely on this being the case.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Whatever this BFD re-transmission function is had a few problems.
1. Used memcpy instead of the (more concise) stream APIs, which include
bounds checking.
2. Did not sufficiently check packet sizes.
Actually, 2) is mitigated but is still a problem, because the BFD header
is 2 bytes larger than the "normal" ZAPI header, while the overall
message size remains the same. So if the source message being duplicated
is actually right up against the ZAPI_MAX_PACKET_SIZ, you still can't
fit the whole message into your duplicated message. I have no idea what
the intent was here but at least there's a warning if it happens now.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
- Fix iptable freeing code to free malloc'd list
- malloc iptable in zapi handler and use those functions to free it when
done to fix a linked list memleak
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We copy a fixed length buffer from the wire but don't ensure it is null
terminated. Then print it as a c-string. Lul.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
further down we hash the src & dst ip, which asserts that the afi is one
of the well known ones, given the field names i assume the correct afis
here are af_inet[6]
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zebra can catch the kernel's route deletion by netlink.
but current FRR can't delete kernel-route on vrf(l3mdev)
when kernel operator delete the route on out-side of FRR.
It looks problem about kernel-route deletion.
This problem is caused around _nexthop_cmp_no_labels(nh1,nh2)
that checks the each nexthop's member 'vrf_id'.
And _nexthop_cmp_no_labels's caller doesn't set the vrf_id
of nexthop structure. This commit fix that case.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
router-id is buried deep in "show running-config", this new
command makes it easy to retrieve the user configured router-id.
Example:
# configure terminal
(config)# router-id 1.2.3.4
(config)# end
# show router-id
router-id 1.2.3.4
# configure terminal
(config)# no router-id 1.2.3.4
(config)# end
# show router-id
#
Signed-off-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
We were not setting the RTNH_F_ONLINK flag where appropriate
when creating nexthop objects in the kernel.
Set it on the nhmsg.nh_flags netlink message.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When we are doing a lookup on an individual nexthop,
we should still be passing along the type that gets passed
via the arguments. Otherwise, we will always think we own that
NHE when in reality anyone could have put that into the
kernel.
Before this patch, nexthops in the kernel will get swepped
out even if we didn't create them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We should be NULL checking the entire re->nhe struct, not
the group inside of it. When we get routes from the kernel
using a nexthop group (and future protocols) they will only
pass us an ID to use. Hence, this struct can (and will be)
NULL on first attach when only passed an ID.
There shouldn't be a situation where we have an re->nhe
and don't have an re->nhe->nhg anyway.
Before this patch you can easily make zebra crash by creating a
route in the kernel using a nexthop group and starting zebra.
`ip next add dev lo id 111`
`ip route add 1.1.1.1/32 nhid 111`
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Older versions of protobuf-c do not support version 3 of the
protocol. Add a check into the system to see if we have
version 3 available and if so, compile it in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you compile FRR with no j factor zebra_mlag.c fails to
build because the vtysh extraction methodology runs first
before the protobuf compiler runs and that compilation does
not have the proper dependancy chain built for the inclusions
that zebra_mlag.c had. Moving the DEF* code into a zebra_mlag_vty.c
which can be included in the vtysh extraction code and has
no mlag.proto dependancies makes the compilation work better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handle the special case where a route update contains
no installed nexthops - that means the route is not
installed.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
