When the router is non dr for an interface, it installs mroute to drop
the packets from directly connected source. This was done to avoid packets
coming to cpu as nocache hit. Later when it gets change from non-DR to DR,
these entries are not cleared. So the packets are still dropped.
This causes register packets not getting generated.
So cleaning up the mroute entries and channel oil without
upstream reference which was created to drop.
Co-authored-by: Saravanan K <saravanank@vmware.com>
Signed-off-by: Sai Gomathi N <nsaigomathi@vmware.com>
When pim_upstream_inherited_olist_decide calls the api
pim_channel_add_oif, it can pass PIM_OIF_FLAG_PROTO_GM,
PIM_OIF_FLAG_PROTO_PIM and/or PIM_OIF_FLAG_PROTO_STAR.
Now a consider a case where PIM flag was already set
but STAR flag was not set and this api tries to set
both STAR + PIM and passes the same. The api pim_channel_add_oif
returns since it sees that PIM is already set without
setting the STAR flag.
So basically this will lead to issues in scenarios where for the
same OIF multiple flags(IGMP, PIM, STAR) needs to be set.
Fixing it for all combinations.
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
The pim_channel_oil_empty() function was setting
the pimreg if it ever existed for NULL comparison
but of course the pimreg device is never pulled back
out again when it was needed to be when the pimreg
is not present.
Commit: a5fa982256
broke this.
Fixes: #11368
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
These will corrupt memory if mroute_vif_index is -1 (e.g. interface not
operating.) That shouldn't happen, but it does while doing development
work, so trip an assert rather than corrupting memory.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is just hitting the pim_mroute code with a hammer until it doesn't
print warnings anymore. This is NOT quite tested or working yet, it
just compiles.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replaces comparison against INADDR_ANY, so we can do IPv6 too.
(Renamed from "pim_is_addr_any" for "pim_addr_*" naming pattern, and
type fixed to bool.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
... and replace with `%pSG` printfrr specifier. This actually used a
static buffer in the formatting function, so subsequent formatting would
overwrite earlier uses.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Mostly just 2 sed calls:
- `sed -e 's%struct prefix_sg%pim_sgaddr%g'`
- `sed -e 's%memset(&sg, 0, sizeof(pim_sgaddr));%memset(\&sg, 0, sizeof(sg));%g'`
Plus a bunch of fixing whatever that broke.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since this is only used in very few places, moving it out of the way is
reasonable. (`%pSG` will be pim_sgaddr)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The zlog_warn used to be bounded by a debug guard
but the debug guard was removed but the code was
never fixed up to remove the open and close paranthesis.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When running pim on an interface and that interface has
state and we move that interface into a different vrf
there exists a call path where we have not created the pimreg
device yet. Prevent a crash in this rare situation.
Ticket: #2552763
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Found some more missing code that got dropped during the
upstreaming process causing issues with things actually
working.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Additional protocols were being set on the OIF proto-mask without
logs. Added logs in that area.
Also added start and end logs to ifchannel_delete to help
identify state machine changes that play out as a part of this
event handling.
Ticket: CM-26732
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
There was some code missed during the upstreaming process
due to code squash. Identify and put into a commit
to keep code consistent and correct.
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the upstream_list and hash to a rb tree, Significant
time was being spent in the listnode_add_sort. This reduces
this time greatly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The channel_oil_list and hash are taking significant
cpu at scale when adding to the sorted list. Replace
with a RB_TREE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Inherited OIL is used as a part of the JoinDesired macro. And in FRR we
use the channel OIL as the inherited OIL (to reduce processing overhead
everytime JD needs to be re-evaluated). On a FHR pimreg is a part of the
channel-OIL but must not be used for JD computation.
This commit blacklists pimreg from the inherited_oil i.e. present but
ignored.
Note: This fixup is being done to address topotest failures.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This is needed for two reasons -
1. The inherited OIL needs to be setup independent of the RPF interface
to allow correct computation of the JoinDesired macro.
2. The RPF interface is computed at the time of MFC programming so
it is not possible to permanently evict the OIF at that time oif_add
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a inherited OIL becomes empty join-desired can go to false. So
we need to re-run join-desired evaluation on any inherited OIL changes.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The macro was always returning non-empty because of comparing an
array of u8_t with an array of u32_t.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
mfcc_parent for an (S, G) entry was being updated on any upstream RPF
change. With the change to use RPT for (S,G) in some cases we can no
longer do that. Instead the upstream entry's RPF neigbor is managed
separately form the channel_oil's mfcc_parent i.e. via NHT. And the
mfcc_parent is evaluated at the time of mroute programming.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
An (S,G) mroute can be created as a result of rpt prune. However that
entry needs to stay on the parent (*,G)'s tree (IIF) till a decision is
made to switch the source to the SPT.
The decision to stay on the RPT is made based on the SPTbit setting
according to - RFC7761, Section 4.2 “Data Packet Forwarding Rules”
However those rules are hard to achieve when hw acceleration i.e.
control and data planes are separate. So instead of relying on data
we make the decision of using SPT if we have decided to join the SPT -
Use_RPT(S,G) {
if (Joined(S,G) == TRUE // we have decided to join the SPT
OR Directly_Connected(S) == TRUE // source is directly connected
OR I_am_RP(G) == TRUE) // RP
//use_spt
return FALSE;
//use_rpt
return TRUE;
}
To make that change some re-org was needed -
1. pim static mroutes and dynamic (upstream mroutes) top level APIs
have been separated. This is to limit the state machine to dynamic
mroutes.
2. c_oil->oil.mfcc_parent is re-evaluated based on if we decided
to use the SPT or stay on the RPT.
3. upstream mroute re-eval is done when any of the criteria involved
in Use_RPT changes.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Theoretically there should be no case where the channel-oil hangs
around after the upstream entry is removed. But currently there are
cases where it does. This is a precautionary fixup till we are
rid off all of those cases.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If an mroute loses DF election (with the MLAG peer) it has to stop
forwarding traffic on active-active devices such as ipmr-lo used
for vxlan traffic termination. To acheive that this commit
introduces a concept of OIF muting. That way we can let the PIM and
IGMP state machines play out and silence OIFs after the fact.
Relevant outputs:
=================
1. muted OIFs are displayed with the M flag in "pim state" -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@TORC12:~# net show pim state |grep "27.0.0.13"|grep 100
1 27.0.0.13 239.1.1.100 uplink-1 ipmr-lo( *M)
root@TORC12:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2. And supressed altogether in the mroute output -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
root@TORC12:~# net show mroute |grep "27.0.0.13"|grep 100
27.0.0.13 239.1.1.100 none uplink-1 none 0 --:--:--
root@TORC12:~#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These logs were printing file name which has little value (is always
pim_oil.c). Instead print the caller.
add_oif/del_oif are being called directly from one too many. Instead OIF
setup needs to be consolidated via the PIM state machine. These
debugs are expected to help in understanding what needs to be cleaned up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add a function that allows you to modify the channel oil's incoming
interface and to appropriately install/remove it from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vifi being displayed is just confusing. Display the
actual interface name being used in the mroute.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In Scenario where receiver is present in a subnet where 2 or more pim mrouters.
When IGMP query received on a DR interface and RP is reachable through non DR.
Currently we are blocking to create upstream where iif == oif. So pim join
not generated towards RP. We have to allow the DR router in the network to create an upstream.
Signed-off-by: Saravanan K <saravanank@vmware.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This is specifically needed to allow pim-evpn mroutes in the MLAG setup -
(36.0.0.11, 239.1.1.100) Iif: peerlink.4094 Oifs: uplink-1, peerlink.4094
I could have gone the other way and disabled PIM_ENFORCE_LOOPFREE_MFC but
that opens the door too wide. Relaxing the checks for mlag-specific mroutes
seemed like the safer choice.
This commit provides the infrastructure to relax checks on a per-mroute
basis.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In this commit, we are creating a dummy upstream & dummy channel_oil
for (*, G) when RP is not configured or not reachable.
Dummy upstream: <upstream_addr = INADDR_ANY, rpf = Unknown>
Dummy channel oil: <iif = MAXVIFS>
Signed-off-by: Sarita Patra <saritap@vmware.com>
Issue: Shut the RP interface in the router RP. LHR will get to know
RP becomes not-reachable, so it send a prune towards the RP. On
receiving the prune, RP clear the (*, G) entry, but (S, G) should
not get removed if present.
Now no-shut the RP interface in the router RP. LHR will send a (*, G)
join towards the RP. On receiving join FRR create the (*, G) entry.
Along with this, it also add the interface(join received) in the OIL
of (S, G) and also refresh the (S, G) timer.
Fix: Dont refresh the timer for S, G or (*, G), if the flag for the
channel OIL is PIM_OIF_FLAG_PROTO_ANY.
Signed-off-by: Sarita Patra <saritap@vmware.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
