The only places entry->any could ever be set to true was
when str was NULL. Unfortunately with the way our CLI works
str is impossible to be NonNULL. The entry->any value *used*
to work prior to commit e961923c72
but it was changed back in 2016 and no-one has noticed the changed
ability.
Let's just admit that there are no users of this and remove this
dead code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Since the test was not named test_bgp_gr_functionality_topo3.py
pytest was not picking it up to run. Let's run it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Code is no longer using a global FE "client context", and instead
creates client objects, rename the structure and it's uses to reflect this.
Remove an obfuscating abstraction layer whose existence was entirely
based on using a uintptr_t rather than a pointer to an declared-only struct.
Change multi-duty "params" structure into a single duty callbacks one.
Remove unsupported API code.
Signed-off-by: Christian Hopps <chopps@labn.net>
Remove an obfuscating abstraction layer whose existence was entirely
based on using a uintptr_t rather than a pointer to an declared-only struct.
As the code is no longer using a global FE "client context", and instead
create client objects, rename the structure and it's uses to reflect this.
Change init "params" structure into a single use callbacks one.
Signed-off-by: Christian Hopps <chopps@labn.net>
When a state machine transition fails, bgpd would output
data about what happened, but not necessarily give the
reason why. Add that data to the output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The tests are failing due to heavily loaded system and insufficient
time for large configs to be handled. Increasing the time
allows the tests to complete locally for me under heavy load.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
All paths of the loop set dest_addr at the start
of the loop. No need to set it to NULL to immediately
set it too something else.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Let's account for vpn_policy_getafi having a failure
situation and back out of the whole thing gracefully.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It is impossible for the blnc statement to ever be NULL at
line 1470 as that the if statement at 1453 guarantees it
to be set to something.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The msg value is always reset to something new before it is used inside
the mutex. No need to set it to NULL.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
A configured flex-algo algorithm may remain in disabled state after its
definition is advertised on the area.
It happens sometimes that, in isis_sr_flex_algo_topo1 topotest step 4 or
8, flex-algo 203 is disabled. It depends on the following sequence:
1. Flex-algo 203 is configured on a remote router to be re-advertised.
2. A LSP is received on the local router and contains the algo 203
definition.
3. The local router re-builds its own LSP with lsp_build().
4. local router isis_run_spf() recomputes the algo 203 SPF tree.
A 1. 2. 3. 4. sequence results in a working test. The reception of the
remote LSP (2.) does not trigger the built of the local LSP. If for
some reasons, the sequence is 1. 3. 4. 2. 4., isis_run_spf() will not
knows that flex-algo 203 has been re-enabled because
flex_algo_get_state() only returns the state from the local LSP.
Compare in sequence step 4. the flex-algo state from the local LSP with
the actual state. If the state is not the same, request a new local LSP
generation and quits the re-computation of algo SPF tree. The SPF tree
will be recomputed just after the built of the local LSP.
Fixes: 3f55b8c621 ("isisd: fix disabled flex-algo on race condition")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Some test steps result in removing some entries in the MPLS forwarding
table. However, these steps pass before the entries are actually
removed.
Use the exact JSON comparison so that the removal of the entries is
checked.
Fixes: 1a61ef95b2 ("tests: add isis_sr_flex_algo_topo1 for flex-algo")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When using a context to send route notifications to upper
level protocols, the code was using a locking function to
get the route node. There is no need for this to be locked
as such FRR should free it up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Commit 76249532fa ("ospf6d: Handle Premature Aging of LSAs") added a
duplicate call to OSPF6_INTRA_PREFIX_LSA_EXECUTE_TRANSIT(), when the
interface state changes to "Down".
Fixes: #1738
Signed-off-by: David Ward <david.ward@ll.mit.edu>
When issue vtysh command with ?, the initial buf size for the
element is 16. Then it would loop through each element in the cmd
output vector. If the required size for printing out the next
element is larger than the current buf size, realloc the buf memory
by doubling the current buf size regardless of the actual size
that's needed. This would cause vtysh core when the doubled size
is not enough for the next element.
Signed-off-by: Yuan Yuan <yyuanam@amazon.com>
Keep only 3 release dates, current and two upcoming. On the next release,
just update one, instead of multiple (zero point looking too much in the
future).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
There is no way that xpath can ever be anything but NULL
in the failure path with the goto's. Let's just remove
the goto's and return immediately.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the remote peer is neither EBGP nor confed, aspath is the
shadow copy of attr->aspath in bgp_packet_attribute(). Striping
AS4_PATH should not be done on the aspath directly, since
that would lead to bgpd core dump when unintern the attr.
Signed-off-by: Yuan Yuan <yyuanam@amazon.com>
Change timestamp parameter from int to time_t to avoid truncation.
Found by Coverity Scan (CID 1563226 and 1563222)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
