If the user wants to keep a copy for themselves, they should make a
copy. It adds unnecessary complexity to make sure the returned entries
are valid until the builder is cleared.
Finding a filename in a vector means we need to resort it every time we
want to read from it, which includes every time we want to write to it
as well, as we want to find duplicate keys.
A hash-map fits what we want to do much more accurately, as we do not
care about sorting, but just the particular filename.
We still keep removed entries around, as the interface let you assume
they were going to be around until the treebuilder is cleared or freed,
but in this case that involves an append to a vector in the filter case,
which can now fail.
The only time we care about sorting is when we write out the tree, so
let's make that the only time we do any sorting.
Since the SOVERSION doesn't need to follow the library's version and
simply needs to be monotonically increasing whenever we release
something that breaks the ABI, we can set some number and allow multiple
versions of the library to be installed side-by-side.
We start here with the minor version as that's what we release for now,
and it allows to backport this change to earlier versions.
There is no reason why we need to use a callback here. A string array
fits better with the usage, as this is not an event and we don't need
anything from the user.
The documentation has shown this as a single enum for a long time. These
should in fact be two enums. One with the bits for the flags and another
with the bits for the extended flags.
If requested, git_clone_local_into() will try to link the object files
instead of copying them.
This only works on non-Windows (since it doesn't have this) when both
are on the same filesystem (which are unix semantics).
When git is given such a path, it will perform a "local clone",
bypassing the git-aware protocol and simply copying over all objects
that exist in the source.
Copy this behaviour when given a local path.
Diff and status do not want core.safecrlf to actually raise an
error regardless of the setting, so this extends the filter API
with an additional options flags parameter and adds a flag so that
filters can be applied with GIT_FILTER_OPT_ALLOW_UNSAFE, indicating
that unsafe filter application should be downgraded from a failure
to a warning.
This is a proposed adjustment to the trace APIs. This makes the
trace levels into a bitmask so that they can be selectively enabled
and adds a callback-level payload, plus a message-level payload.
This makes it easier for me to a GIT_TRACE_PERF callbacks that
are simply bypassed if the PERF level is not set.
This adds an option to refresh the stat cache while generating
status. It also rips out the GIT_PERF stuff I had an makes use
of the trace API to keep statistics about what happens during diff.
When diff is scanning the working directory, if it finds a file
where it is not sure if the index entry matches the working dir,
it will recalculate the OID (which is pretty expensive). This
adds a new flag to diff so that if the OID calculation finds that
the file actually has not changed (i.e. just the modified time was
altered or such), then it will refresh the stat cache in the index
so that future calls to diff will not have to check the oid again.
This reorganized the diff OID calculation to make it easier to
correctly update the stat cache during a diff once the flags to
do so are enabled.
This includes marking the path of a git_index_entry as const so
we can make a "fake" git_index_entry with a "const char *" path
and not get warnings. I was a little surprised at how unobtrusive
this change was, but I think it's probably a good thing.
The current version of the commit creation and amend function are unsafe
to use when passing the update_ref parameter, as they do not check that
the reference at the moment of update points to what the user expects.
Make sure that we're moving history forward when we ask the library to
update the reference for us by checking that the first parent of the new
commit is the current value of the reference. We also make sure that the
ref we're updating hasn't moved between the read and the write.
Similarly, when amending a commit, make sure that the current tip of the
branch is the commit we're amending.
This takes the `--stat` and related example options in the example
diff.c program and converts them to use the `git_diff_get_stats`
API which nicely formats stats for you.
I went to add bar-graph scaling to the stats formatter and noticed
that the `git_diff_stats` structure was holding on to all of the
`git_patch` objects. Unfortunately, each of these objects keeps
the full text of the diff in memory, so this is very expensive. I
ended up modifying `git_diff_stats` to keep just the data that it
needs to keep and allowed it to release the patches. Then, I added
width scaling to the output on top of that.
In making the diff example program match 'git diff' output, I ended
up removing an newline from the sumamry output which I then had to
compensate for in the email formatting to match the expectations.
Lastly, I went through and refactored the tests to use a couple of
helper functions and reduce the overall amount of code there.
I was playing with "git diff-index" and wanted to be able to
emulate that behavior a little more closely with the diff example.
Also, I wanted to play with running `git_diff_tree_to_workdir`
directly even though core Git doesn't exactly have the equivalent,
so I added a command line option for that and tweaked some other
things in the example code.
This changes a minor output thing in that the "raw" print helper
function will no longer add ellipses (...) if the OID is not
actually abbreviated.
Allow the credentials callback to return GIT_PASSTHROUGH to make the
transports code behave as though none was set.
This should make it easier for bindings to behave closer to the C code
when there is no credentials callback set at their level.
With the isolation of complex reads, we can now try to refresh the
on-disk file before reading a value from it.
This changes the semantics a bit, as before we could be sure that a
string we got from the configuration was valid until we wrote or
refreshed. This is no longer the case, as a read can also invalidate the
pointer.
In order to have consistent views of the config files for remotes,
submodules et al. and a configuration that represents what is currently
stored on-disk, we need a way to provide a view of the configuration
that does not change.
The goal here is to provide the snapshotting part by creating a
read-only copy of the state of the configuration at a particular point
in time, which does not change when a repository's main config changes.
I introduced a leak into conflict cleanup by removing items from
inside the git_vector_remove_matching call. This simplifies the
code to just use one common way for the two conflict cleanup APIs.
When an index has an active snapshot, removing an item can cause
an error (inserting into the deferred deletion vector), so I made
the git_index_conflict_cleanup API return an error code. I felt
like this wasn't so bad since it is just like the other APIs.
I fixed up a couple of comments while I was changing the header.
The usefulness of these helpers came up for me while debugging
some of the iterator changes that I was making, so since they
have also been requested (albeit indirectly) I thought I'd include
them.
Again, laying groundwork for some index iterator changes, this
contains a bunch of code refactorings for index internals that
should make it easier down the line to add locking around index
modifications. Also this removes the redundant prefix_position
function and fixes some potential memory leaks.
git_branch_t is an enum so requesting GIT_BRANCH_LOCAL | GIT_BRANCH_REMOTE is not possible as it is not a member of the enum (at least VS2013 C++ complains about it).
This fixes a regression introduced in commit a667ca8298 (PR #1946).
Signed-off-by: Sven Strickroth <email@cs-ware.de>
The order in this function is the opposite to what
create_with_fetchspec() has, so change this one, as url-then-refspec is
what git does.
As we need to break compilation and the swap doesn't do that, let's take
this opportunity to rename in-memory remotes to anonymous as that's
really what sets them apart.
The reload_all call could end up dereferencing a NULL pointer if
there was an error while attempting to load the submodules config
data (i.e. invalid content in the gitmodules file). This fixes it.
`git_submodule` objects were already refcounted internally in case
the submodule name was different from the path at which it was
stored. This makes that refcounting externally used as well, so
`git_submodule_lookup` and `git_submodule_add_setup` return an
object that requires a `git_submodule_free` when done.
This finds a short id string that will unambiguously select the
given object, starting with the core.abbrev length (usually 7)
and growing until it is no longer ambiguous.
This adds `git_diff_buffers` and `git_patch_from_buffers`. This
also includes a bunch of internal refactoring to increase the
shared code between these functions and the blob-to-blob and
blob-to-buffer APIs, as well as some higher level assert helpers
in the tests to also remove redundancy.
* Make GIT_INLINE an internal definition so it cannot be used in
public headers
* Fix language in CONTRIBUTING
* Make index caps API use signed instead of unsigned values
This adds an API to amend an existing commit, basically a shorthand
for creating a new commit filling in missing parameters from the
values of an existing commit. As part of this, I also added a new
"sys" API to create a commit using a callback to get the parents.
This allowed me to rewrite all the other commit creation APIs so
that temporary allocations are no longer needed.
Let the user push committish objects and peel them to figure out which
commit to push to our queue.
This is for convenience and for allowing uses of
git_revwalk_push_glob(w, "tags")
with annotated tags.
Change the name to _matching() intead of _if(), and force _set_target()
to be a conditional update. If the user doesn't care about the old
value, they should use git_reference_create().
This removes the fetchRecurse compiler warnings and makes the
behavior match the other submodule options (i.e. the in-memory
setting can be reset to the on-disk value).
It's hard or even impossible to correctly free the string buffer
allocated by git_patch_to_str in some circumstances. Drop the function
so people have to use git_patch_to_buf instead - git_buf has a dedicated
destructor.
Returning library-allocated strings from libgit2 works fine on Linux,
but may cause problems on Windows because there is no one C Runtime that
everything links against. With libgit2 not exposing its own allocator,
freeing the string is a gamble.
git_patch_to_str already serializes to a buffer, then returns the
underlying memory. Expose the functionality directly, so callers can use
the git_buf_free function to free the memory later.
The "merge none" (don't automerge) flag was only to aide in
merge trivial tests. We can easily determine whether merge
trivial resulted in a trivial merge or an automerge by examining
the REUC after automerge has completed.
The default merge_file level was XDL_MERGE_MINIMAL, which will
produce conflicts where there should not be in the case where
both sides were changed identically. Change the defaults to be
more aggressive (XDL_MERGE_ZEALOUS) which will more aggressively
compress non-conflicts. This matches git.git's defaults.
Increase testing around reverting a previously reverted commit to
illustrate this problem.
Extend the "unmodified" submodule workdir test to include
uninitialized submodules, to prevent reporting submodules as
modified when they're not in the workdir at all.
