If a directory disappears between the time we look up the entries of its
parent and the time when we go to look at it, we should ignore the error
and move forward.
This fixes#2046.
This finds a short id string that will unambiguously select the
given object, starting with the core.abbrev length (usually 7)
and growing until it is no longer ambiguous.
A few fixes have accumulated in this area which have made the freeing of
data a bit muddy. Make sure to free the data only when needed and once.
When we are going to write a delta to the packfile, we need to free the
data, otherwise leave it. The current version of the code mixes up the
checks for po->data and po->delta_data.
This adds `git_diff_buffers` and `git_patch_from_buffers`. This
also includes a bunch of internal refactoring to increase the
shared code between these functions and the blob-to-blob and
blob-to-buffer APIs, as well as some higher level assert helpers
in the tests to also remove redundancy.
- added MSVC cmake definitions to disable warnings
- general.c is rewritten so it is ansi-c compatible and compiles ok on microsoft windows
- some MSVC reported warning fixes
* Make GIT_INLINE an internal definition so it cannot be used in
public headers
* Fix language in CONTRIBUTING
* Make index caps API use signed instead of unsigned values
On some systems, notably HP PA-RISC systems running Linux or HP-UX,
EWOULDBLOCK and EAGAIN are not the same value. POSIX (and these OSes) allow
EWOULDBLOCK to occur on write(2) (and send(2), etc.), so check explicitly
for this case as well as EAGAIN by defining and using a macro GIT_ISBLOCKED
that considers both.
The macro is necessary because MSYS does not provide EWOULDBLOCK and
compilation fails if an attempt is made to use it unconditionally. On most
systems, where the two values are the same, the compiler will simply
optimize this check out and it will have no effect.
This adds an API to amend an existing commit, basically a shorthand
for creating a new commit filling in missing parameters from the
values of an existing commit. As part of this, I also added a new
"sys" API to create a commit using a callback to get the parents.
This allowed me to rewrite all the other commit creation APIs so
that temporary allocations are no longer needed.
This fixes a number of warnings with the Windows 64-bit build
including a test failure in test_repo_message__message where an
invalid pointer to a git_buf was being used.
We need this from util.h and posix.h, but the latter includes common.h
which includes util.h, which means p_strlen is not defined by the time
we get to git__strndup().
Split the definition on p_strlen() off into its own header so we can use
it in util.h.
The current code issues a lot of strncmp() calls in order to check for
the end of the header, simply in order to copy it and start going
through it again. These are a lot of calls for something we can check as
we go along. Knowing the amount of parents beforehand to reduce
allocations in extreme cases does not make up for them.
Instead start parsing immediately and check for the double-newline after
each header field, leaving the raw_header allocation for the end, which
lets us go through the header once and reduces the amount of strncmp()
calls significantly.
In unscientific testing, this has reduced a shortlog-like usage (walking
though the whole history of a branch and extracting data from the
commits) of git.git from ~830ms to ~700ms and makes the time we spend in
strncmp() negligible.
Let the user push committish objects and peel them to figure out which
commit to push to our queue.
This is for convenience and for allowing uses of
git_revwalk_push_glob(w, "tags")
with annotated tags.
Change the name to _matching() intead of _if(), and force _set_target()
to be a conditional update. If the user doesn't care about the old
value, they should use git_reference_create().
This tweaks the pqueue_up and pqueue_down routines so that they
will not do full element swaps but instead carry over the state
of the previous loop iteration and only assign elements for which
we know the final position. This will avoid a little bit of data
assignment which should improve performance in theory.
Also got rid of some vector helpers that I'm no longer using.
This fixes a typo I made for setting the sorted flag on the index
after a reload. That typo didn't actually cause any test failures
so I'm also adding a test that explicitly checks that the index is
correctly sorted after a reload when ignoring case and when not.
This updates the git_pqueue to simply be a set of specialized
init/insert/pop functions on a git_vector.
To preserve the pqueue feature of having a fixed size heap, I
converted the "sorted" field in git_vectors to a more general
"flags" field so that pqueue could mix in it's own flag. This
had a bunch of ramifications because a number of places were
directly looking at the vector "sorted" field - I added a couple
new git_vector helpers (is_sorted, set_sorted) so the specific
representation of this information could be abstracted.
I accidentally wrote a separate priority queue implementation when
I was working on file rename detection as part of the file hash
signature calculation code. To simplify licensing terms, I just
adapted that to a general purpose priority queue and replace the
old priority queue implementation that was borrowed from elsewhere.
This also removes parts of the COPYING document that no longer
apply to libgit2.
Validating the workdir should not compare HEAD to working
directory - this is both inefficient (as it ignores the cache)
and incorrect. If we had legitimately allowed changes in the
index (identical to the merge result) then comparing HEAD to
workdir would reject these changes as different. Further, this
will identify files that were filtered strangely as modified,
while testing with the cache would prevent this.
Also, it's stupid slow.
The checkout code used to defer removal of "blocking" files in
checkouts until the blocked item was actually being written (since
we have already checked that the removing the block is acceptable
according to the update rules). Unfortunately, this resulted in
an intermediate index state where both the blocking and new items
were in the index which is no longer allowed. Now we just remove
the blocking item in the first pass so it never needs to coexist.
In cases where there are typechanges, this could result in a bit
more churn of removing and recreating intermediate directories,
but I'm going to assume that is an unusual case and the churn will
not be too costly.
There were some confusing issues mixing up the number of bytes
written to the zstream output buffer with the number of bytes
consumed from the zstream input. This reorganizes the zstream
API and makes it easier to deflate an arbitrarily large input
while still using a fixed size output.
This removes the fetchRecurse compiler warnings and makes the
behavior match the other submodule options (i.e. the in-memory
setting can be reset to the on-disk value).
When three-way merging indexes, we previously changed each path
as we read them, which would lead to us adding an index entry for
'foo', then removing an index entry for 'foo/file'. With the new
index requirements, this is not allowed. Removing entries in the
merged index, then adding them, resolves this. In the previous
example, we now remove 'foo/file' before adding 'foo'.
In case insensitive index mode, we would stop at a prefixed entry,
treating the provided search key length as a substring, not the
length of the string to match.
Writing a sample Javascript driver pointed out some extra
whitespace handling that needed to be done in the diff driver.
This adds some tests with some sample javascript code that I
pulled off of GitHub just to see what would happen. Also, to
clean up the userdiff test data, I did a "git gc" and packed
up the test objects.
Since I don't have permission yet on the code from Git, I decided
I'd take a stab at writing patterns for PHP and Javascript myself.
I think these are pretty weak, but probably better than the
default behavior without them.
I contacted a number of Git authors and lined up their permission
to relicense their work for use in libgit2 and copied over their
code for diff driver xfuncname patterns. At this point, the code
I've copied is taken verbatim from core Git although Thomas Rast
warned me that the C++ patterns, at least, really need an update.
I've left off patterns where I don't feel like I have permission
at this point until I hear from more authors.
Reorganize the builtin driver table slightly so that core Git
builtin definitions can be imported verbatim. Then take a few of
the core Git drivers and pull them in.
This also creates a test of diffs with the builtin HTML driver
which led to some small error handling fixes in the driver
selection logic.
This extends the diff driver parser to support multiline driver
definitions along with ! prefixing for negated matches. This
brings the driver function pattern parsing in line with core Git.
This also adds an internal table of driver definitions and a
fallback code path that will look in that table for diff drivers
that are set with attributes without having a definition in the
config file. Right now, I just populated the table with a kind
of simple HTML definition that is similar to the core Git def.
Don't try to determine whether the system supports file modes
when putting the tree data in the index during checkout. The tree's
mode is canonical and did not come from stat(2) in the first place.
It's hard or even impossible to correctly free the string buffer
allocated by git_patch_to_str in some circumstances. Drop the function
so people have to use git_patch_to_buf instead - git_buf has a dedicated
destructor.
Returning library-allocated strings from libgit2 works fine on Linux,
but may cause problems on Windows because there is no one C Runtime that
everything links against. With libgit2 not exposing its own allocator,
freeing the string is a gamble.
git_patch_to_str already serializes to a buffer, then returns the
underlying memory. Expose the functionality directly, so callers can use
the git_buf_free function to free the memory later.
The "merge none" (don't automerge) flag was only to aide in
merge trivial tests. We can easily determine whether merge
trivial resulted in a trivial merge or an automerge by examining
the REUC after automerge has completed.
The default merge_file level was XDL_MERGE_MINIMAL, which will
produce conflicts where there should not be in the case where
both sides were changed identically. Change the defaults to be
more aggressive (XDL_MERGE_ZEALOUS) which will more aggressively
compress non-conflicts. This matches git.git's defaults.
Increase testing around reverting a previously reverted commit to
illustrate this problem.
Any well-behaved program should write a descriptive message to the
reflog whenever it updates a reference. Let's make this more prominent
by removing the version without the reflog parameters.
This changes git_signature_dup to actually honor oom conditions raised by
the call to git__strdup. It also aligns it with the error code return
pattern used everywhere else.
