While it is possible for the return value from zfs_log2() to be zero
(0), it is quite unlikely, given that the previous assignment to blksz
is shifted up by SPA_MINBLOCKSHIFT (9) before 9 is subtracted at the
assignment to epbs.
But, while unlikely during a normal operation, it may be that a carefully
crafted ZFS filesystem could result in a zero (0) value to the
dn_datalbkszsec field, which means that the shift left does nothing
and assigns zero (0) to blksz, resulting in a negative epbs value.
Fixes: CID 73608
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
HFS+ documentation suggests that the maximum filename and volume name is
255 Unicode characters in length.
So, when converting from big-endian to little-endian, we should ensure
that the name of the volume has a length that is between 0 and 255,
inclusive.
Fixes: CID 73641
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The encrypt and decrypt functions expect a grub_size_t. So, we need to
ensure that the constant bit shift is using grub_size_t rather than
unsigned int when it is performing the shift.
Fixes: CID 307788
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The problem here is that the memory allocated to the variable lv is not
yet inserted into the list that is being processed at the label fail2.
As we can already see at line 342, which correctly frees lv before going
to fail2, we should also be doing that at these earlier jumps to fail2.
Fixes: CID 73824
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Several error handling paths in make_vg() do not free comp data before
jumping to fail2 label and returning from the function. This will leak
memory. So, let's fix all issues of that kind.
Fixes: CID 73804
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There is the possibility that the value of str comes from an external
source and continuing to use it before ever checking its validity is
wrong. So, needs fixing.
Additionally, drop unneeded part initialization.
Fixes: CID 292444
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While many compilers will initialize this to zero, not all will, so it
is better to be sure that fields not being explicitly set are at known
values, and there is code that checks this fields value elsewhere in the
code.
Fixes: CID 292440
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
These 2 assignments are unnecessary since they are just assigning
to themselves.
Fixes: CID 73643
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This issue has been fixed in the latest version of gnulib, so to
maintain consistency, I've backported that change rather than doing
something different.
Fixes: CID 73828
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It appears to be possible that the mctx->state_log field may be NULL,
and the name of this function, clean_state_log_if_needed(), suggests
that it should be checking that it is valid to be cleaned before
assuming that it does.
Fixes: CID 86720
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
All other instances of call to __argp_failure() where there is
a dgettext() call is first checking whether state is NULL before
attempting to dereference it to get the root_argp->argp_domain.
Fixes: CID 292436
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The code is assuming that the value of br_token.constraint was
initialized to zero when it wasn't.
While some compilers will ensure that, not all do, so it is better to
fix this explicitly than leave it to chance.
Fixes: CID 73749
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a really minor issue where a variable is being assigned to but
not checked before it is overwritten again.
The reason for this issue is that we are not building with DEBUG set and
this in turn means that the assert() that reads the value of the
variable match_last is being processed out.
The solution, move the assignment to match_last in to an ifdef DEBUG too.
Fixes: CID 292459
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The model of grub_efi_get_memory_map() is that if memory_map is NULL,
then the purpose is to discover how much memory should be allocated to
it for the subsequent call.
The problem here is that with grub_efi_is_finished set to 1, there is no
check at all that the function is being called with a non-NULL memory_map.
While this MAY be true, we shouldn't assume it.
The solution to this is to behave as expected, and if memory_map is NULL,
then don't try to use it and allow memory_map_size to be filled in, and
return 0 as is done later in the code if the buffer is too small (or NULL).
Additionally, drop unneeded ret = 1.
Fixes: CID 96632
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Free the memory allocated to name before returning on failure.
Fixes: CID 296222
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
After processing the command-line yet arriving at the point where we are
setting argv, we are allocating memory, even if argc == 0, which makes
no sense since we never put anything into the allocated argv.
The solution is to simply return that we've successfully processed the
arguments but that argc == 0, and also ensure that argv is NULL when
we're not allocating anything in it.
There are only 2 callers of this function, and both are handling a zero
value in argc assuming nothing is allocated in argv.
Fixes: CID 96680
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The static code analysis tool, Parfait, reported that the valid of
file->data was left referencing memory that was freed by the call to
grub_free(data) where data was initialized from file->data.
To ensure that there is no unintentional access to this memory
referenced by file->data we should set the pointer to NULL.
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It is always possible that grub_zalloc() could fail, so we should check for
a NULL return. Otherwise we run the risk of dereferencing a NULL pointer.
Fixes: CID 296221
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When returning from grub_mmap_iterate() the memory allocated to present
is not being released causing it to leak.
Fixes: CID 96655
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The maximum number of configurations and interfaces are fixed but there is
no out-of-bound checking to prevent a malicious USB device to report large
values for these and cause accesses outside the arrays' memory.
Fixes: CVE-2020-25647
Reported-by: Joseph Tartaro <joseph.tartaro@ioactive.com>
Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When a module is attempted to be removed its reference counter is always
decremented. This means that repeated rmmod invocations will cause the
module to be unloaded even if another module depends on it.
This may lead to a use-after-free scenario allowing an attacker to execute
arbitrary code and by-pass the UEFI Secure Boot protection.
While being there, add the extern keyword to some function declarations in
that header file.
Fixes: CVE-2020-25632
Reported-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The command is not present in the docs/grub.texi user documentation.
Reported-by: Daniel Kiper <daniel.kiper@oracle.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
The shim_lock verifier validates the XNU kernels but no its extensions
and packages. Prevent these to be loaded when the GRUB is locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The gdbstub* commands allow to start and control a GDB stub running on
local host that can be used to connect from a remote debugger. Restrict
this functionality when the GRUB is locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The command can be used to get/set ATA disk parameters. Some of these can
be dangerous since change the disk behavior. Restrict it when locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This command can set PCI devices register values, which makes it dangerous
in a locked down configuration. Restrict it so can't be used on this setup.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There are some more commands that should be restricted when the GRUB is
locked down. Following is the list of commands and reasons to restrict:
* fakebios: creates BIOS-like structures for backward compatibility with
existing OSes. This should not be allowed when locked down.
* loadbios: reads a BIOS dump from storage and loads it. This action
should not be allowed when locked down.
* devicetree: loads a Device Tree blob and passes it to the OS. It replaces
any Device Tree provided by the firmware. This also should
not be allowed when locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The cutmem and badram commands can be used to remove EFI memory regions
and potentially disable the UEFI Secure Boot. Prevent the commands to be
registered if the GRUB is locked down.
Fixes: CVE-2020-27779
Reported-by: Teddy Reed <teddy.reed@gmail.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The command is not allowed when lockdown is enforced. Otherwise an
attacker can instruct the GRUB to load an SSDT table to overwrite
the kernel lockdown configuration and later load and execute
unsigned code.
Fixes: CVE-2020-14372
Reported-by: Máté Kukri <km@mkukri.xyz>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Now the GRUB can check if it has been locked down and this can be used to
prevent executing commands that can be utilized to circumvent the UEFI
Secure Boot mechanisms. So, instead of hardcoding a list of modules that
have to be disabled, prevent the usage of commands that can be dangerous.
This not only allows the commands to be disabled on other platforms, but
also properly separate the concerns. Since the shim_lock verifier logic
should be only about preventing to run untrusted binaries and not about
defining these kind of policies.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
If the UEFI Secure Boot is enabled then the GRUB must be locked down
to prevent executing code that can potentially be used to subvert its
verification mechanisms.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It may be useful for scripts to determine whether the GRUB is locked
down or not. Add the lockdown variable which is set to "y" when the GRUB
is locked down.
Suggested-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
When the GRUB starts on a secure boot platform, some commands can be
used to subvert the protections provided by the verification mechanism and
could lead to booting untrusted system.
To prevent that situation, allow GRUB to be locked down. That way the code
may check if GRUB has been locked down and further restrict the commands
that are registered or what subset of their functionality could be used.
The lockdown support adds the following components:
* The grub_lockdown() function which can be used to lockdown GRUB if,
e.g., UEFI Secure Boot is enabled.
* The grub_is_lockdown() function which can be used to check if the GRUB
was locked down.
* A verifier that flags OS kernels, the GRUB modules, Device Trees and ACPI
tables as GRUB_VERIFY_FLAGS_DEFER_AUTH to defer verification to other
verifiers. These files are only successfully verified if another registered
verifier returns success. Otherwise, the whole verification process fails.
For example, PE/COFF binaries verification can be done by the shim_lock
verifier which validates the signatures using the shim_lock protocol.
However, the verification is not deferred directly to the shim_lock verifier.
The shim_lock verifier is hooked into the verification process instead.
* A set of grub_{command,extcmd}_lockdown functions that can be used by
code registering command handlers, to only register unsafe commands if
the GRUB has not been locked down.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move the shim_lock verifier from its own module into the core image. The
Secure Boot lockdown mechanism has the intent to prevent the load of any
unsigned code or binary when Secure Boot is enabled.
The reason is that GRUB must be able to prevent executing untrusted code
if UEFI Secure Boot is enabled, without depending on external modules.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Move verifiers API from a module to the kernel image, so it can be
used there as well. There are no functional changes in this patch.
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix compilation error due to missing parameter to
grub_printf() when MM_DEBUG is defined.
Fixes: 64e26162e (calloc: Make sure we always have an overflow-checking calloc() available)
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/113-kern-mm-Fix-grub_debug_calloc-compilation-error.patch
The gui_progress_bar and gui_label components can display the timeout
value. The format string can be set through a theme file. This patch
adds a validation step to the format string.
If a user loads a theme file into the GRUB without this patch then
a GUI label with the following settings
+ label {
...
id = "__timeout__"
text = "%s"
}
will interpret the current timeout value as string pointer and print the
memory at that position on the screen. It is not desired behavior.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/112-gfxmenu-gui-Check-printf-format-in-the-gui_progress_bar-and-gui_label.patch
The grub_printf_fmt_check() function parses the arguments of an untrusted
printf() format and an expected printf() format and then compares the
arguments counts and arguments types. The arguments count in the untrusted
format string must be less or equal to the arguments count in the expected
format string and both arguments types must match.
To do this the parse_printf_arg_fmt() helper function is extended in the
following way:
1. Add a return value to report errors to the grub_printf_fmt_check().
2. Add the fmt_check argument to enable stricter format verification:
- the function expects that arguments definitions are always
terminated by a supported conversion specifier.
- positional parameters, "$", are not allowed, as they cannot be
validated correctly with the current implementation. For example
"%s%1$d" would assign the first args entry twice while leaving the
second one unchanged.
- Return an error if preallocated space in args is too small and
allocation fails for the needed size. The grub_printf_fmt_check()
should verify all arguments. So, if validation is not possible for
any reason it should return an error.
This also adds a case entry to handle "%%", which is the escape
sequence to print "%" character.
3. Add the max_args argument to check for the maximum allowed arguments
count in a printf() string. This should be set to the arguments count
of the expected format. Then the parse_printf_arg_fmt() function will
return an error if the arguments count is exceeded.
The two additional arguments allow us to use parse_printf_arg_fmt() in
printf() and grub_printf_fmt_check() calls.
When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
function parse user provided untrusted format string too. So, in
that case it is better to be too strict than too lenient.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/111-kern-misc-Add-function-to-check-printf-format-against-expected-format.patch
Set printf() argument type for "%s" to new type STRING. This is in
preparation for a follow up patch to compare a printf() format string
against an expected printf() format string.
For "%s" the corresponding printf() argument is dereferenced as pointer
while all other argument types are defined as integer value. However,
when validating a printf() format it is necessary to differentiate "%s"
from "%p" and other integers. So, let's do that.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/110-kern-misc-Add-STRING-type-for-internal-printf-format-handling.patch
This patch is preparing for a follow up patch which will use
the format parsing part to compare the arguments in a printf()
format from an external source against a printf() format with
expected arguments.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/109-kern-misc-Split-parse_printf_args-into-format-parsing-and-va_list-handling.patch
Add a --sbat option to the grub-mkimage tool which allows us to import
an SBAT metadata formatted as a CSV file into a .sbat section of the
EFI binary.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/107-util-mkimage-Add-an-option-to-import-SBAT-metadata-into-a-.sbat-section.patch
Add a init_pe_section() helper function to setup PE sections. This makes
the code simpler and easier to read.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/106-util-mkimage-Refactor-section-setup-to-use-a-helper.patch
According to "Microsoft Portable Executable and Common Object File Format
Specification", the Optional Header SizeOfInitializedData field contains:
Size of the initialized data section, or the sum of all such sections if
there are multiple data sections.
Make this explicit by adding the GRUB kernel data size to the sum of all
the modules sizes. The ALIGN_UP() is not required by the PE spec but do
it to avoid alignment issues.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/105-util-mkimage-Improve-data_size-value-calculation.patch
This makes the PE32 and PE32+ header fields set-up easier to follow by
setting them closer to the initialization of their related sections.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/104-util-mkimage-Reorder-PE-optional-header-fields-set-up.patch
There's quite a bit of code duplication in the code that sets the optional
header for PE32 and PE32+. The two are very similar with the exception of
a few fields that have type grub_uint64_t instead of grub_uint32_t.
Factor out the common code and add a PE_OHDR() macro that simplifies the
set-up and make the code more readable.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/103-util-mkimage-Unify-more-of-the-PE32-and-PE32-header-set-up.patch
This change does not impact final result of initialization itself.
However, it eases PE code unification in subsequent patches.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Patch-Name: 2021-02-security/102-util-mkimage-Always-use-grub_host_to_target32-to-initialize-PE-stack-and-heap-stuff.patch
