The hdr_offset member of the ARM Linux image header appears at
offset 0x3c, matching the PE/COFF spec's placement of the COFF
header offset in the MS-DOS header. We're currently off by four,
so fix that.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@arm.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This should help prevent format string errors and thus improve the quality
of error reporting.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This is a temporary, less-intrusive change to get the build to success with
compiler format string checking turned on. There is a better fix which
addresses this issue, but it needs more testing. Use this change so that
format string checking on grub_error() can be turned on until the better
change is fully tested.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The macro ELF_R_TYPE does not change the underlying type. Here its argument
is a 64-bit Elf64_Xword. Make sure the format code matches.
For the RISC-V architecture, rel->r_info could be either Elf32_Xword or
Elf64_Xword depending on if 32 or 64-bit RISC-V is being built. So cast
to 64-bit value regardless.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Also remove casting of format string args so that the architecture dependent
type is preserved.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The second format string argument, GRUB_EFI_MAX_USABLE_ADDRESS, is a macro
to a number literal. However, depending on what the target architecture, the
type can be 32 or 64 bits. Cast to a 64-bit integer. Also, change the
format string literals "%llx" to use PRIxGRUB_UINT64_T.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The format code is for a 32-bit int, but the argument, keyid, is declared as
a 64 bit int. The comment above says keyid is 32-bit. I'm not sure if the
comment or declaration is wrong, so force the display of a 64-bit int for now.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_error() has a format string expecting two arguments, but only one
provided. According to the comments in the struct grub_nv_super definition,
the version field looks like a version number where major.minor is encoded
as each a byte in the two-byte short.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Its obvious from the error message that the variable named "type" was
accidentally omitted.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch does the following:
- really disables os-prober by default in the util/grub-mkconfig.in
by setting GRUB_DISABLE_OS_PROBER to true,
- fixes the logic in the util/grub.d/30_os-prober.in,
- updates the grub_warn() lines.
Reason for the code shuffling in the util/grub-mkconfig.in:
The default was GRUB_DISABLE_OS_PROBER=false if you don't set
GRUB_DISABLE_OS_PROBER at all. To prevent os-prober from starting we
have to set it by default to true and shuffle GRUB_DISABLE_OS_PROBER to
code section, which is executed by the script. However we still give an
option to the user to overwrite it with false, if he wants to execute
os-prober after all.
Fixes: e3464147 (templates: Disable the os-prober by default)
Reported-by: Didier Spaier <didier@slint.fr>
Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Philip Müller <philm@manjaro.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
While attempting to dual boot Microsoft Windows with UEFI chainloader,
it failed with below error when UEFI Secure Boot was enabled:
error ../../grub-core/kern/verifiers.c:119:verification requested but
nobody cares: /EFI/Microsoft/Boot/bootmgfw.efi.
It is a regression, as previously it worked without any problem.
It turns out chainloading PE image has been locked down by commit
578c95298 (kern: Add lockdown support). However, we should consider it
as verifiable object by shim to allow booting in UEFI Secure Boot mode.
The chainloaded PE image could also have trusted signature created by
vendor with their pubkey cert in db. For that matters it's usage should
not be locked down under UEFI Secure Boot, and instead shim should be
allowed to validate a PE binary signature before running it.
Fixes: 578c95298 (kern: Add lockdown support)
Signed-off-by: Michael Chang <mchang@suse.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This error message comes from the grub_print_error() in
grub_pata_device_initialize(), which does not pass on the error, and is
raised in check_device(). The function check_device() needs to return this
as an error because check_device() is also used in grub_pata_open(), which
does pass on this error to indicate that the device can not be used.
This is actually not an error when displayed by grub_pata_device_initialize()
because it just indicates that there are no pata devices seen. This may be
confusing to end users who do not have pata devices yet are loading the
pata module (perhaps implicitly via nativedisk). This also causes unnecessary
output which may need to be accounted for in functional testing.
Instead print to the debug log when check_device() raises this "error" and
pop the error from the error stack. If there is another error on the stack
then print the error stack as those should be real errors.
Signed-off-by: Glenn Washburn <development@efficientek.com>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We encountered a file not found error when the symlink filesize is
equal to 60:
$ ls -l initrd
lrwxrwxrwx 1 root root 60 Jan 6 16:37 initrd -> secure-core-image-initramfs-5.10.2-yoctodev-standard.cpio.gz
When booting, we got the following error in the GRUB:
error: file `/initrd' not found
The root cause is that the size of diro->inode.symlink is equal to 60
and a symlink name has to be terminated with NUL there. So, if the
symlink filesize is exactly 60 then it is also stored in a separate
block rather than in the inode itself.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The relocatable variable is defined as grub_uint8_t. Relevant
member in setup_header structure is also defined as one byte
in Linux boot protocol. By semantic definition it is a bool type.
It is not appropriate to treat it as a four bytes. This patch
fixes the issue.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The preferred_address has been assigned to GRUB_LINUX_BZIMAGE_ADDR
during initialization in grub_cmd_linux(). The assignment here
is redundant and should be removed.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to the Embedded Base Boot Requirements (EBBR) specification the
device-tree passed to Linux as a configuration table must reside in
EfiACPIReclaimMemory.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
UEFI specification 2.8 errata B introduced the EFI_RT_PROPERTIES_TABLE
describing the services available at runtime.
The lsefisystab command is used to display installed EFI configuration
tables. Currently it only shows the GUID but not a short text for the
new table.
Provide a short text for the EFI_RT_PROPERTIES_TABLE_GUID.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
To give users hint why Argon2, the default in cryptsetup for LUKS2, does
not work.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Patrick Steinhardt <ps@pks.im>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The commit f1957dc8a (RISC-V: Add to build system) added two entries to
the options array, but only 1 entry to the enum. This resulted in
everything after the insertion point being off by one.
This broke at least the "file --is-hibernated-hiberfil" command.
Bring the two back in sync by splitting the IS_RISCV_EFI enum entry into
two, as is done for other architectures.
Signed-off-by: Derek Foreman <derek@endlessos.org>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Fix compilation error due to missing parameter to
grub_printf() when MM_DEBUG is defined.
Fixes: 64e26162e (calloc: Make sure we always have an overflow-checking calloc() available)
Signed-off-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The os-prober is enabled by default what may lead to potentially
dangerous use cases and borderline opening attack vectors. This
patch disables the os-prober, adds warning messages and updates
GRUB_DISABLE_OS_PROBER configuration option documentation. This
way we make it clear that the os-prober usage is not recommended.
Simplistic nature of this change allows downstream vendors, who
really want os-prober to be enabled out of the box in their
relevant products, easily revert to it's old behavior.
Reported-by: NyankoSec (<nyanko@10x.moe>, https://twitter.com/NyankoSec),
working with SSD Secure Disclosure
Signed-off-by: Alex Burmashev <alexander.burmashev@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The gui_progress_bar and gui_label components can display the timeout
value. The format string can be set through a theme file. This patch
adds a validation step to the format string.
If a user loads a theme file into the GRUB without this patch then
a GUI label with the following settings
+ label {
...
id = "__timeout__"
text = "%s"
}
will interpret the current timeout value as string pointer and print the
memory at that position on the screen. It is not desired behavior.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The grub_printf_fmt_check() function parses the arguments of an untrusted
printf() format and an expected printf() format and then compares the
arguments counts and arguments types. The arguments count in the untrusted
format string must be less or equal to the arguments count in the expected
format string and both arguments types must match.
To do this the parse_printf_arg_fmt() helper function is extended in the
following way:
1. Add a return value to report errors to the grub_printf_fmt_check().
2. Add the fmt_check argument to enable stricter format verification:
- the function expects that arguments definitions are always
terminated by a supported conversion specifier.
- positional parameters, "$", are not allowed, as they cannot be
validated correctly with the current implementation. For example
"%s%1$d" would assign the first args entry twice while leaving the
second one unchanged.
- Return an error if preallocated space in args is too small and
allocation fails for the needed size. The grub_printf_fmt_check()
should verify all arguments. So, if validation is not possible for
any reason it should return an error.
This also adds a case entry to handle "%%", which is the escape
sequence to print "%" character.
3. Add the max_args argument to check for the maximum allowed arguments
count in a printf() string. This should be set to the arguments count
of the expected format. Then the parse_printf_arg_fmt() function will
return an error if the arguments count is exceeded.
The two additional arguments allow us to use parse_printf_arg_fmt() in
printf() and grub_printf_fmt_check() calls.
When parse_printf_arg_fmt() is used by grub_printf_fmt_check() the
function parse user provided untrusted format string too. So, in
that case it is better to be too strict than too lenient.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Set printf() argument type for "%s" to new type STRING. This is in
preparation for a follow up patch to compare a printf() format string
against an expected printf() format string.
For "%s" the corresponding printf() argument is dereferenced as pointer
while all other argument types are defined as integer value. However,
when validating a printf() format it is necessary to differentiate "%s"
from "%p" and other integers. So, let's do that.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This patch is preparing for a follow up patch which will use
the format parsing part to compare the arguments in a printf()
format from an external source against a printf() format with
expected arguments.
Signed-off-by: Thomas Frauendorfer | Miray Software <tf@miray.de>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Commit 32ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled) reintroduced CVE-2020-15705 which
previously only existed in the out-of-tree linuxefi patches and was
fixed as part of the BootHole patch series.
Under Secure Boot enforce loading shim_lock verifier. Allow skipping
shim_lock verifier if SecureBoot/MokSBState EFI variables indicate
skipping validations, or if GRUB image is built with --disable-shim-lock.
Fixes: 132ddc42c (efi: Only register shim_lock verifier if shim_lock
protocol is found and SB enabled)
Fixes: CVE-2020-15705
Fixes: CVE-2021-3418
Reported-by: Dimitri John Ledkov <xnox@ubuntu.com>
Signed-off-by: Dimitri John Ledkov <xnox@ubuntu.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a --sbat option to the grub-mkimage tool which allows us to import
an SBAT metadata formatted as a CSV file into a .sbat section of the
EFI binary.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a init_pe_section() helper function to setup PE sections. This makes
the code simpler and easier to read.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
According to "Microsoft Portable Executable and Common Object File Format
Specification", the Optional Header SizeOfInitializedData field contains:
Size of the initialized data section, or the sum of all such sections if
there are multiple data sections.
Make this explicit by adding the GRUB kernel data size to the sum of all
the modules sizes. The ALIGN_UP() is not required by the PE spec but do
it to avoid alignment issues.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This makes the PE32 and PE32+ header fields set-up easier to follow by
setting them closer to the initialization of their related sections.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
There's quite a bit of code duplication in the code that sets the optional
header for PE32 and PE32+. The two are very similar with the exception of
a few fields that have type grub_uint64_t instead of grub_uint32_t.
Factor out the common code and add a PE_OHDR() macro that simplifies the
set-up and make the code more readable.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This change does not impact final result of initialization itself.
However, it eases PE code unification in subsequent patches.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The latter doesn't take into account the target image endianness. There is
a grub_cpu_to_le32_compile_time() but no compile time variant for function
grub_host_to_target32(). So, let's keep using the other one for this case.
Signed-off-by: Peter Jones <pjones@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The code is compiled out so there is no reason to keep it.
Additionally, don't set bss_size field since we do not add a BSS section.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
It works only on UEFI platforms but can be quite easily extended to
others architectures and platforms if needed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Marco A Benatto <mbenatto@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
grub_parser_split_cmdline() expands variable names present in the supplied
command line in to their corresponding variable contents and uses a 1 kiB
stack buffer for temporary storage without sufficient bounds checking. If
the function is called with a command line that references a variable with
a sufficiently large payload, it is possible to overflow the stack
buffer via tab completion, corrupt the stack frame and potentially
control execution.
Fixes: CVE-2020-27749
Reported-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Signed-off-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Add a new variable sized heap buffer type (grub_buffer_t) with simple
operations for appending data, accessing the data and maintaining
a read cursor.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Introduce a common function epilogue used for cleaning up on all
return paths, which will simplify additional error handling to be
introduced in a subsequent commit.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
process_char() and grub_parser_split_cmdline() use similar code for
terminating the most recent argument. Add a helper function for this.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
grub_parser_split_cmdline() iterates over each command line character.
In order to add error checking and to simplify the subsequent error
handling, split the character processing in to a separate function.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
The getline() function supplied to grub_parser_split_cmdline() returns
a newly allocated buffer and can be called multiple times, but the
returned buffer is never freed.
Signed-off-by: Chris Coulson <chris.coulson@canonical.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
We need to check errors before calling into a function that uses the result.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
This prevents a divide by zero if nstripes == nparities, and
also prevents propagation of invalid values if nstripes ends up
less than nparities.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
