mirror of
https://git.proxmox.com/git/fwupd
synced 2026-03-28 11:38:31 +00:00
73 lines
1.6 KiB
Markdown
73 lines
1.6 KiB
Markdown
# SteelSeries
|
|
|
|
## Introduction
|
|
|
|
This plugin allows to update firmware on SteelSeries gamepads:
|
|
|
|
* Stratus Duo
|
|
* Stratus Duo USB wireless adapter
|
|
* Stratus+
|
|
* Aerox 3 Wireless
|
|
* Rival 3 Wireless
|
|
|
|
SteelSeries Rival 100 gaming mice support is limited by getting the correct
|
|
version number. These mice have updatable firmware but so far no updates are
|
|
available from the vendor.
|
|
|
|
This plugin supports the following protocol IDs:
|
|
|
|
* com.steelseries.fizz
|
|
* com.steelseries.gamepad
|
|
* com.steelseries.sonic
|
|
|
|
## GUID Generation
|
|
|
|
These devices use the standard USB DeviceInstanceId values, e.g.
|
|
|
|
* `USB\VID_1038&PID_1702&REV_0001`
|
|
* `USB\VID_1038&PID_1702`
|
|
* `USB\VID_1038`
|
|
|
|
## Quirk Use
|
|
|
|
This plugin uses the following plugin-specific quirks:
|
|
|
|
### Flags:is-receiver
|
|
|
|
The device is a USB receiver.
|
|
|
|
Since 1.8.1
|
|
|
|
## Update Behavior
|
|
|
|
### Gamepad
|
|
|
|
Gamepad and/or its wireless adapter must be connected to host via USB cable
|
|
to apply an update. The device is switched to bootloader mode to flash
|
|
updates, and is reset automatically to new firmware after flashing.
|
|
|
|
### Mice
|
|
|
|
The device is not upgradable and thus requires no vendor ID set.
|
|
|
|
### Wireless Mice
|
|
|
|
### Rival 3 Wireless
|
|
|
|
The mouse switch button underneath must be set to 2.4G, and its 2.4G USB
|
|
Wireless adapter must be connected to host.
|
|
|
|
### Aerox 3 Wireless
|
|
|
|
The mouse switch button underneath must be set to 2.4G, and its 2.4G USB
|
|
Wireless adapter must be connected to host; or the mouse must be connected to
|
|
host via the USB-A to USB-C cable.
|
|
|
|
## Vendor ID Security
|
|
|
|
The vendor ID is set from the USB vendor, in this instance set to `USB:0x1038`
|
|
|
|
## External Interface Access
|
|
|
|
This plugin requires read/write access to `/dev/bus/usb`.
|