Correctly attach into the alternate mode after the update has completed.
The vendor was appending two files to make LVFS distribution 'easier' but I'd
much rather use the same deliverables as Windows. This also allows us to
simplify the firmware loading.
Sometimes we only want to add the instance ID to get the quirk matches, and it
is confusing to see the "fake" IDs in the 'fwupdmgr get-devices' output.
Quite a few plugins use HID commands to communicate with the hardware. At the
mement we have ~6 implementations of SET_REPORT and are soon to add one more.
Move this into common code.
This works around a silicon errata which makes the existing 0xB0 chip reset
non-functional.
ALso, as VL10x and VL103 are so different now, use different `->attach()` and
`->detach()` implementations for code sanity.
Based on a patch by Sherlock Chu <SherlockChu@via-labs.com>, many thanks.
These are visually similar to Intel hex files, but different enough to demand
their own parser. Multiple images can be stored in one firmware file, with the
`addr` set to the SiliconID and the `idx` set to the position in the file.
The m-stack DFU quirk also requires that we get the runtime status so that the
USB_DFU_SUCCESS_FUNC callback gets called. We were doing this by accident
before, and since switching to the FuDevice subclass this was dropped.
The dfu_device_refresh_and_clear() function is safe to call on a device which
does not have a working runtime interface.
I misunderstood the original specification, and it seems even USB-hub-less
devices have the same header location as their "write-through" counterparts.
The logic was wrong; we should have been using command 0xB0 for attach back to
FW mode for both VL10x and VL103. Using a generic reset on VL103 always reset
the device back into bootloader mode as the ROM signatures were being written
by command 0xC0.
As now attach and detach have different code paths, there's no point having a
`FuVliDevice->reset()` vfunc, and so we can make everything a little simpler at
the same time.
If the measurements are missing but it's a UEFI system, it's a good indication
that the user has secure boot turned off.
Notify the user on the UEFI device through a non-fatal `UpdateMessage`
To accomplish this, move fu-uefi-vars into the plugin library for other plugins to use
If we say that the version format should be the same for the `version_lowest`
and the `version_bootloader` then it does not always make sense to set it at
the same time.
Moving the `version_format` to a standalone first-class property also means it
can be typically be set in the custom device `_init()` function, which means we
don't need to worry about *changing* ther version format as set by the USB and
UDev superclass helpers.
This does 'bleed' the metadata contents into areas previously covered by quirks,
but in this case may be pragmatic and more up to date than a build-time
generated quirk file, which increases the user-friendliness of fwupdmgr.
Some vendors want to ship updates for ATA hardware, but there are currently no
lock-down restrictions in place for these kind of devices.
There is the OUI from the WWN block which is supposed to identify the vendor,
but this is not always set and so we have to be a little creative. We can match
90% of hardware using the vendor name prefix, and the last 10% can be detected
with a heuristic that was the result of comparing over 900 drive models.
I'm not including very old drive models, media converters, raid controllers,
or external 'portable' drives as I don't think it is useful. Also, if the drive
contains a Dell vendor block just hardcode this as Dell rather than trying to
be clever.
Also ask the user to contribute OUI values if this data is found with no quirk
data as this is the only real sane way to manage this data long term.
The list of OUIs can be found here: http://standards-oui.ieee.org/oui.txt
In 1de7cc we checked the version format when checking for update, but there are
many other places that are doing verfmt-insensitive comparisons. For instance,
the predicates in <requires> all fail if the device version format is plain.
his breaks updating some NVMe drives where the `ne` requirements are not
semantic versions.
To avoid trying to catch all the bugs in different places, and in case we have
a future verfmt that should be treated another way, refactor this out in to a
common function and deprecate the old function.
The UEFI ESRT table just gives us a table of GUIDs with some basic flags, and
isn't very useful to end users. This is acceptable for Dell as there is only
typically one ESRT entry, which is for the system firmware. On typical Lenovo
hardware there might be half-a-dozen different 'Device' entries which all look
very similar.
As it's not possible to get a channel-of-data from the ODMs to fwupd, use the
existing LVFS metadata to generate some better names for these devices.
Although this looks like a lot of repeated data, libxmlb helpfully dedupes the
strings for us, making the quirk store only slightly larger.
Also, I've deliberately made this a manual step as we're not going to have
internet access on distro builders, and I'd also like the fwupd tarball output
to be deterministic and repeatable.
Currently if there is an invalid boot entry for firmware update, the fwupd
EFI program will not call UpdateCapsule(), even if there is a valid entry.
For example, if the following entries exist the firmware update will fail:
HD(1,GPT,A672BBCA-325E-4D6F-91E1-DD57FAA85A9C)/\EFI\rhel\fw\fwupdate-6cialq.cap ... /*Valid entry*/
HD(1,GPT,E8176B29-6F73-43F2-AE8E-05E09DE20EE5)/\EFI\fedora\fw\fwupd-6dcbd5ed-e82d-4c44-bda1-7194199ad92a.cap ... /*InValid entry*/
Ensure capsule update is happening even if a valid capsule entry exists.
Signed-off-by: Bhaskar Upadhaya <bupadhaya@marvell.com>
Some logitech devices seem to reboot immediately and the failures then
look like a broken pipe, but are actually the device rebooting.
If the device really did fail to detach after the timeout is done we'll
see a message that the device failed to come back instead.
Deleting boot entries from EFI sometimes triggers problems on some firmware.
We don't actually need to do it from the EFI binary, and it's perfectly safe to
leave it in the boot list. It also means when doing multiple updates over
several months we're not creating, deleting, creating, deleting and can just
re-use the same BootXXXX number each time.
It also makes the EFI binary simpler, which is good.
At the moment fwupd creates a BootXXXX for fwupd.efi and marks it BootNext.
It *also* adds it to the end of BootOrder to work around various old firmware
bugs like https://github.com/rhboot/fwupdate/issues/55 which we can perhaps
drop sometime thie century.
Remove the rewriting of BootOrder from the EFI binary; we've accidentally not
been doing it for a long time and nothing broke, and I'd like to make the EFI
binary as small and simple as possible. The user can remove the entry from the
BIOS or using efibootmgr if required, but it's harmless to just leave it.
This reverts commit 44f55e2ee6.
This behavior caused fwupdx64.efi to loop for a very long time until
either aborting, running out of memory or some other problems.
Fixes: #1756Fixes: #1751
The guint16 was promoted to (signed) int for the multiplication, which meant
that the highest address possible was 0x7FFFFFFF not 0xFFFFFFFF. Which doesn't
really matter in reality, as all addresses are much smaller than that now.
gnu-efi 3.0.11 moves a few files around, e.g.
/usr/lib64/gnuefi/elf_x64_efi.lds -> /usr/lib64/gnuefi/x64/efi.lds
...and this causes the UEFI EFI helper to fail to link.
Add support for the 'new' paths and fall back to the old ones.
Fixes https://github.com/fwupd/fwupd/issues/1736
In some composite dock hardware there are two USB devices exported to the host,
both with the same VID:PID values. We need to use the device type (e.g. VL812B3)
to differenciate the devices and install the correct fw on the correct device.
In theory, these should always match the reported PCRx values from the TPM.
If the reconstructed event log checksum does not match the TPM value then
something is either implemented wrongly, or something bad has happened.
This means we use half the amount of memory to store the event hashes, and also
means we can process the raw data in future patches without parsing back out
of ASCII format.
UEFI runtime service GetVariable with DataSize NULL, will fail and get
EFI_INVALID_PARAMETER returned. Set DataSize 0 and allocate the buffer for
getting attributes for the deleted variable.
Also, fix the real reason Boot#### was never found.
Synaptics versions are encoded as BCD, the largest version that will
ever be represented in this field is '99'.
Using 3 digits in this field has caused multiple problems in upgrades from
LVFS.
1. Devices are being upgraded when not necessary.
IE `5.3.10 > 5.3.010`
2. Device upgrades are deemed failures as follows:
```
BootTime=1571436076,
CompileVersion(com.redhat.efivar)=37,
CompileVersion(com.redhat.fwupdate)=12,
CompileVersion(org.freedesktop.fwupd)=1.3.2,
CompileVersion(org.freedesktop.gusb)=0.3.0,
CpuArchitecture=x86_64,
DistroId=fedora,
DistroVariant=workstation,
DistroVersion=32,
FirmwareId=1915,
Flags=4194346,
Guid=f15aa55c-9cd5-5942-85ae-a6bf8740b96c,
MachineId=97aa89528b88d9631867a4e20c68a5208124ef592e19d05f0c5e7d22bd4d7afb,
Plugin=synapticsmst,
RuntimeVersion(com.dell.libsmbios)=2.4,
RuntimeVersion(com.redhat.fwupdate)=12,
RuntimeVersion(org.freedesktop.appstream-glib)=0.7.14,
RuntimeVersion(org.freedesktop.fwupd)=1.3.2,
RuntimeVersion(org.kernel)=5.4.0-0.rc2.git2.1.fc32.x86_64,
UpdateError=device version not updated on success, 05.03.10 != 5.03.010,
UpdateState=failed,
VersionNew=05.03.10,
VersionOld=5.03.010
```
There's no reason to prevent NULL, and doing so means the caller has to check
before setting the value. Only one subclassed type was actually doing this...
No need to fail these self tests when using amdgpu, just skip them.
Fixes unrelated issue found in #1183
Signed-off-by: Richard Hughes <richard@hughsie.com>
Some hardware does not handle upgrading from version 1.2.2 to 1.2.4 and instead
needs to be upgraded from 1.2.2->1.2.3->1.2.4 so that on-device metadata can be
migrated correctly.
Add a new per-device flag `install-all-releases` which causes the daemon to not
skip directly to the newest release. This is designed to be set from a quirk
file.
This can obviously only be used for devices that can apply firmware "live" and
thus do not need a reboot or system shutdown to actually apply the firmware.
This also needs the cabinet archive to ship multiple versions of the firmware,
and for the metainfo.xml file to refer to multiple release objects.
To implement the SPI commands, objects can derive from FuVliDevice and
implement the new vfuncs. This allows us to override the implementation for
minor API changes.
Right now vendor string is detected by walking up the udev chain
until a vendor is found. On some systems this is finding incorrect
data such as `Intel Corporation` for the vendor on the touchpad.
As the plugin only supports Synaptics devices, Correct it by hardcoding
vendor to `Synaptics`.
Sample output:
```
└─Touchpad:
Device ID: b26933c085b020ecf84c490812458523aee710ac
Current version: 1.5.2767034
Bootloader Version: 54.0
Vendor: Synaptics (HIDRAW:0x06CB)
GUIDs: f4384034-9243-5334-8075-a534be913e46 ← HIDRAW\VEN_06CB&DEV_76AF&REV_00
424bd00e-9789-5cdf-a12a-3c81bc4676d6 ← HIDRAW\VEN_06CB&DEV_76AF
140f4458-951b-5bb9-85e2-879bd5b02615 ← SYNAPTICS_RMI\TM3038-003
b29d3c85-cd0e-503e-9c7e-f6731c1eaf2d ← SYNAPTICS_RMI\TM3038
Device Flags: • Internal device
• Updatable
```
Dell does not include the first byte in the ESRT value, ignoring it. Using a
`quad` means we get versions like `0.1.4.0` rather than `1.4.0` which confuses
both users comparing versions to the vendor website, and also anyone trying to
do analysis on the firmware.
Only on Lenovo devices the DMI version string is prefixed with
CBETxxxx to make the thinkpad_acpi kernel module happy.
Add a new quirk called "CorebootVersionQuirks" to detect platforms
that need to cut of the prefix.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
In fu_plugin_startup we make sure that the FU_HWIDS_KEY_BIOS_VENDOR
matches "coreboot", so there's no need to read it again.
Remove the call to fu_plugin_get_dmi_value and drop the first call
to fu_device_set_vendor as it gets overwritten below.
Hardcode the id string for now.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
We don't actually need either of the things it provides (looking up in source
and built, and converting to an absolute path) so just replace it with
g_build_filename() instead.
This also has the advantage that it does the right thing on Windows.
Some plugins have devices with more than one protocol. Logically the protocol
belongs to the device, not the plugin, and in the future we could use this to
further check firmware that's about to be deployed.
This is also not exported into libfwupd (yet?) as it's remains a debug-feature
only -- protocols are not actually required for devices to be added.
This support was using the wrong commands to add a HWID and thus
never actually functioned. Furthermore it's purpose is to pull
the PID out of the bootloader to be able to properly identify
the device when in bootloader mode (as in recovery mode).
When in this state, generate the correct instance IDs for both
possible Wacom VID. We can't tell which Wacom VID we are in
bootloader mode.
This makes everything simpler, at the expense of not being able to create a
`BootFFFF` entry -- but if we get that far something has already gone very
wrong with the firmware...
Some derivative distributions re-use bootloader paths from their
upstream. When this happens the current logic to look for the `ID`
key in `/etc/os-release` doesn't work properly.
Adjust the logic to:
1) Use `ID`
2) Test the path exists. If so, use it.
3) If it doesn't use `ID_LIKE`.
4) Test if that path exists, if so use it.
5) If that path doesn't exist, return the key from `ID`
6) The plugin will make this path.
This fixes a regression introduced by 2031ce3bf6
that leads to:
```
USB error on device 2dc8:5750 : No such device (it may have been disconnected) [-4]
```
The GNU gold linker uses the section name `.rela.dyn` instead of
`.rela` for containing the relocation information. If this section
is not copied the EFI executable can crash.
Fixes#1530
In an error block that checks for `NULL` sysfs, you will always see
`(null)` in the string.
```
FuPluginThunderbolt Unable to read generation: failed get id generation for (null)
```
This device was showing up from a LG 38UC99-W USB-C monitor
```
VMM0000:
Device ID: d762543f8c20f636e6fff031a000078d3e10c600
Summary: Multi-Stream Transport Device
Current version: 0.00.000
Vendor: Synaptics
GUIDs: 42addef4-40f9-5e89-b925-d564e35ed368 ← MST-(null)-vmm0000-0
cf8c03c5-18bf-53c4-971f-4a08f88932b5 ← MST-(null)-0
e9427b6a-7389-5461-a592-1da5f8ec99fd ← MST-(null)
Device Flags: • Updatable
```
```
failed to close device: Bad file descriptor
```
fu-udev-device will open a locker automatically now.
However synaptics-rmi closes the file descriptor on it's own with `g_clear_object`.
So destroy the fd in synaptics-rmi.
Set `IS_BOOTLOADER` unconditionally when in fastboot mode. This seems logically
what it is; a degraded mode that's able to update firmware without runtime
functionality.
Fixes https://github.com/fwupd/fwupd/issues/1532
This allows us to do three things:
* Fuzz the loader with `fwupdtool firmware-parse`
* Check the firmware *before* the hardware is put into bootloader mode
* Use FuChunk to build the 32 byte payload chunks
Systems with multiple host controllers will most likely have a different
NVM image for each controller but there is no guarantee that the device_id
within the NVM image varies from one controller to another.
To account for this, build a GUID that contains the last element of the
Thunderbolt controller's udev path.
Sample GUID strings from an XPS 9380 (which only contains one host controller):
```
Guid: 0f401ed2-b847-532a-adc8-3193fc737be6 <- TBT-00d408af-native
Guid: 420b0596-f5cb-5fd7-8416-c99d48ad8de9 <- TBT-00d408af-native-0000:05:00.0
```
This commit follows the presumption that the kernel will enumerate the controllers
in the same order every time.
This also lets us remove the call to dfu_device_wait_for_replug() which was
causing a deadlock due to unsafe main context usage. Splitting the code allows
us to use the device list to watch for replug, without adding even more Jabra-
specific plugin code to the DFU plugin.
Looking at this with a 40,000ft view, the Jabra runtime really doesn't have
much in common with DFU and the reason it was originally all lumped together
was that the daemon couldn't "change" plugins between detach and update.
It's unfortunate that we have to include a sleep() in the DFU code after the
DFU probe, but this is specified by Jabra themselves. Attempting to open the
device without waiting reboots the hub back into runtime firmware mode, so we
can't even retry the failing setup action.
During startup we do 1898 persistent allocations to load the quirk files, which
equates to ~90kb of RSS. Use libxmlb to create a mmap'able store we can query
with XPath queries at runtime.
We can't use the IOTA mechanism in bootloader mode, and failing to create the
FuSynapromDevice object means we can't recover the hardware if the flash failed.
Some devices don't set the CAN_DOWNLOAD attribute in their runtime descriptor.
Rather than quirk these devices just assume that all DFU devices with a DFU
interface can download in DFU mode. The logic being, why would they expose a
runtime DFU interface if they can't download new firmware in DFU mode...
Devices like the DW1820A that are currently blacklisted because of broken DFU
support will remain blocked with this change.
This makes the daemon less destructive at startup, especially if the ESP
is not mounted.
It's stored in 3 different places right now, so move it into one point of truth.
Now the ESP is detected when needed including all point of time safety checks and
dynamically mounted and unmounted if necessary.
It appears to only happen on non-dell systems trying to look up system
ID through `sysinfo_get_dell_system_id`
Other than CI non-dell systems won't be running this code.
Detect and parse current coreboot version.
There's no need to depend on libflashrom for now.
An update mechanism isn't implemented as the kernel interface isn't
stable yet and will be implemented in a separate commit.
Tested on coreboot enabled machine.
Example output:
coreboot System Firmware
DeviceId: 81104bde9db7cb037936659ea727c739f47a5029
Guid: 230c8b18-8d9b-53ec-838b-6cfc0383493a <- main-system-firmware
Guid: de6fd40f-4ec9-5c0b-95e1-8fb13d1b030c <- LENOVO&ThinkPad T410&2537VG5
Guid: 978b0d18-bfe9-5279-9a9f-68dc247a705f <- LENOVO&ThinkPad T410&LENOVO&2537VG5
Summary: Open Source system boot firmware
Plugin: coreboot
Flags: internal|registered
Vendor: LENOVO
Version: 4.10.991
VersionFormat: triplet
Icon: computer
Created: 2019-10-14
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
If calling `ch_strerror` with some values returns `NULL` which makes
the `GError` not get populated.
```
0 0x00007f252d64d3bd in fu_colorhug_device_attach (device=0x560d7b5c4520 [FuColorhugDevice], error=0x7ffc57a51040) at ../plugins/colorhug/fu-colorhug-device.c:200
1 0x0000560d7a398279 in fu_device_attach (self=0x560d7b5c4520 [FuColorhugDevice], error=0x7ffc57a51040) at ../src/fu-device.c:1988
2 0x0000560d7a3a4b6c in fu_plugin_device_attach (self=0x560d7b57e160 [FuPlugin], device=0x560d7b5c4520 [FuColorhugDevice], error=0x7ffc57a51040) at ../src/fu-plugin.c:856
3 0x0000560d7a3a553f in fu_plugin_runner_device_generic
(self=0x560d7b57e160 [FuPlugin], device=0x560d7b5c4520 [FuColorhugDevice], symbol_name=0x560d7a3d4258 "fu_plugin_update_attach", device_func=0x560d7a3a4ac1 <fu_plugin_device_attach>, error=0x7ffc57a51040) at ../src/fu-plugin.c:1049
4 0x0000560d7a3a618d in fu_plugin_runner_update_attach (self=0x560d7b57e160 [FuPlugin], device=0x560d7b5c4520 [FuColorhugDevice], error=0x7ffc57a51040) at ../src/fu-plugin.c:1333
5 0x0000560d7a3bcc33 in fu_engine_update
(self=0x560d7b4b9830 [FuEngine], device_id=0x560d7b64f200 "d45c9d222f7eeb3987c6a7674478bc6aec127b3f", blob_fw2=0x560d7b62c0d0, flags=FWUPD_INSTALL_FLAG_NONE, error=0x7ffc57a51150)
at ../src/fu-engine.c:2001
(gdb) print error_local
$1 = (GError_autoptr) 0x0
```
Currently ICL shows up like this:
```
├─Unknown Device:
│ Device ID: d066959bf1b0da600f4fcaab5aa31cab3ff05eee
│ Summary: Unmatched performance for high-speed I/O
│ Current version: 71.00
│ Update Error: Missing non-active nvmem
│ Flags: internal|require-ac|registered
│ GUID: e72e778e-94f7-5ed2-b560-1c1262ee217c
```
Which isn't very useful to end users. Instead show the generic name
`Thunderbolt Controller` which matches the behavior change we've made
in UEFI FW and Touchpad FW items too.
```
├─Thunderbolt Controller:
│ Device ID: d066959bf1b0da600f4fcaab5aa31cab3ff05eee
│ Summary: Unmatched performance for high-speed I/O
│ Current version: 71.00
│ Update Error: Missing non-active nvmem
│ Flags: internal|require-ac|registered
│ GUID: e72e778e-94f7-5ed2-b560-1c1262ee217c
```
Also, quite the messages about missing vid/did as these won't exist
on ICL either.
I saw a mention that they're actually CX21986 and had some on hand.
They do enumerate:
```
├─Pixel USB-C earbuds:
│ Device ID: 672c087de09848d9e7ee32aa1dea2fbeb8b81e6b
│ Summary: CX21986 USB audio device
│ Current version: 71.133.20
│ Bootloader Version: 03.01.00.00
│ Vendor: Google (USB:0x18D1)
│ Install Duration: 3 seconds
│ Flags: updatable|registered
│ GUIDs: d76048a5-ca69-5cb8-ac86-d418d70c5f29
│ 98043a29-72c5-549b-ad23-de4e2db20a14
│ 93279fe8-d478-531b-9637-05d026be3c2e
│ 8b71f776-f6d0-549d-9547-42740b24bbbc
```
I was seeing on a CML laptop with a Nuvoton TPM the following which
is definitely wrong:
```
Checksum: SHA1(791183aa2c4993dfaf75e95c91bdad067ac2cce1)
Checksum: SHA256(8a0656fe0024cc3300cc4dc8af4fc336112a51013aeb74b21c138ed116bb8691)
Checksum: SHA1(000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000)
```
Actually trying to instantiate the object leads to:
Specified class size for type 'FuWacomEmrDevice' is smaller than the
parent type's 'FuWacomDevice' class size.
Fixes https://github.com/fwupd/fwupd/issues/1456
This was a new file format to help out an OEM, but they didn't actually use it.
If we do need it in the future, it would some back as a src/ helper, not in
plugins/dfu.
We don't support any hardware that actually uses this proposed standard, and
nowadays there is much better public-key encryption people can easily use.
Use this attribute to determine whether or not to try to read 'native'
from the Thunderbolt NVM image at probe time.
This attribute is new to kernel 5.5.
The new plugin is called `optionrom` as this is the only type of image that it
parses for verification only. FuUdevDevice is also the generic parent already.
Although they can be useful for debugging the codepath leading to
a problem, they are also confusing when it comes to the end user
messages:
```
{error #0} linux.c:406 device_get(): readlink of /sys/block/nvme0n1/device/driver failed: No such file or directory
{error #1} linux.c:406 device_get(): readlink of /sys/block/nvme0n1/device/driver failed: No such file or directory
{error #2} linux.c:406 device_get(): readlink of /sys/block/nvme0n1/device/driver failed: No such file or directory
{error #3} linux.c:406 device_get(): readlink of /sys/block/nvme0n1/device/driver failed: No such file or directory:
Error writing to file descriptor: No space left on device
```
Whereas if they weren't shown, that last message would have been plenty.
Avoid checking if bolt supports force-power in coldplug (early on)
because that will dbus-activate boltd, even on systems where there
is no actual thunderbolt hardware and thus also no force-power
support. Since boltd does use the very same kernel mechanism that
fwupd would use when boltd is not around this can not lead to any
regressions.
There are some packaging problems in some distributions that lead
to TSS stack emitting warnings that will fail self tests.
These don't occur as root, and furthermore those distributions run
CI as root already.
And in the dell plugin make it non-fatal to have TPM register read failures
in case the system has TPM1.2 not TPM2.0
If we're using an instance ID with FU_DEVICE_INSTANCE_FLAG_ONLY_QUIRKS (e.g.
for the vendor match in the previous commit) then the GUID is not available.
When the system doesn't support UEFI capsule updates no firmware version
is displayed for the BIOS. Fix this by creating a dummy device:
```
├─System Firmware:
│ Device ID: 123fd4143619569d8ddb6ea47d1d3911eb5ef07a
│ Current version: 1.7.0
│ Vendor: Dell Inc.
│ Update Error: UEFI Capsule updates not available or enabled
│ Flags: internal|require-ac|registered|needs-reboot
```
If the dell-esrt plugin determines that capsule updates can be enabled
however, make the device it creates replace the dummy device:
```
├─Dell UEFI updates:
│ Device ID: 123fd4143619569d8ddb6ea47d1d3911eb5ef07a
│ Summary: Enable UEFI Update Functionality
│ Current version: 0
│ Update Error: Firmware updates disabled; run 'fwupdmgr unlock' to enable
│ Flags: locked|supported|registered|needs-reboot
```
Fixes: #1366
The factory-shipped MinnowBoardMAX board has firmware that does not include
the ESRT table. Create a 'fake' UEFI device with the lowest possible version
so that it can be updated to any version firmware.
All the HwId GUIDs are used for the fake UEFI device, and so should be used in
the firmware metadata for releases that should recover the system.
The fwupd UEFI plugin refuses to start if bit 3 of the "BIOS Characteristics
Extension Byte 2" (13h) is cleared. Bit 3 is UEFI Specification is supported.
Also, double-check that /sys/firmware/efi does not exist before disabling the
plugin as other machines may be affected too. The quirk then acts to supress
the console warning about the broken SMBIOS value.
Fixes https://github.com/fwupd/fwupd/issues/1342
These are a more scalable way to apply firmware across a variety of
platforms.
An example:
```
XPS 13 7390 TPM 2.0
DeviceId: c56e9f77cfee65151bdef90310776f9d62827f5a
Guid: a4352c96-f8d7-526c-8485-7f84085f348e <- 0962-2.0
Guid: 7d65b10b-bb24-552d-ade5-590b3b278188 <- DELL-TPM-2.0-NTC-NPCT
Guid: 6f5ddd3a-8339-5b2a-b9a6-cf3b92f6c86d <- DELL-TPM-2.0-NTC-NPCT75x
Guid: fe462d4a-e48f-5069-9172-47330fc5e838 <- DELL-TPM-2.0-NTC-NPCT75xrls
Summary: Platform TPM device
Plugin: uefi
Flags: internal|require-ac|registered
Vendor: Dell Inc.
Version: 7.2.1.0
VersionFormat: quad
Icon: computer
Created: 2019-09-04
```
When this system is queried using tpm2-tools:
```
$ sudo tpm2_getcap -c properties-fixed
TPM_PT_FAMILY_INDICATOR:
as UINT32: 0x08322e3000
as string: "2.0"
TPM_PT_LEVEL: 0
TPM_PT_REVISION: 1.38
TPM_PT_DAY_OF_YEAR: 0x00000008
TPM_PT_YEAR: 0x000007e2
TPM_PT_MANUFACTURER: 0x4e544300
TPM_PT_VENDOR_STRING_1:
as UINT32: 0x4e504354
as string: "NPCT"
TPM_PT_VENDOR_STRING_2:
as UINT32: 0x37357800
as string: "75x"
TPM_PT_VENDOR_STRING_3:
as UINT32: 0x02010024
as string: ""
TPM_PT_VENDOR_STRING_4:
as UINT32: 0x726c7300
as string: "rls"
```
The new firmware for receivers with the nordic chips is using the 0x04
record type. This was previously not handled when parsing the file,
causing wrong behavior when trying to update the device. This patch
tries to properly deal with the record types, being them 0x04 or other.
Signed-off-by: Filipe Laíns <lains@archlinux.org>
There are commits to the Thunderbolt kernel driver that make sure
that the upgrade process goes smoothly. If these commits aren't
present then it will look like a fwupd problem, when it's actually
a kernel problem.
When this issue was reported it appeared that commit
e4be8c9b6a
was missing from the locally tested kernel, but it's impossible
to determine that from userspace.
Prevent running the thunderbolt plugin on older kernels than that
set in `$sysconfdir/fwupd/thunderbolt.conf`.
By default that is set to 4.13.0, but if a distribution vendor has
backported all the necessary support it can be decreased to a lower
version for distro packages.
This removes the 'two-layer' FuDevice and FuSyanpticsmstDevice model, where
a complicated plugin cache was used to add and remove devices to the daemon.
By making FuSynapticsmstDevice derive from FuDevice rather than GObject we can
also use a lot of the helper functionality like the other plugins, for instance
->prepare_firmware().
The `drm_dp_aux_dev` devices do not emit uevents on unplug/re-plug and so all
devices of `drm` class are watched and the actual DP AUX devices rescanned after
a small delay. When the AUX devices emit changes from the kernel this workaround
can be removed.
Also drop force power support for MST controllers in the Dell plugin. Overall
this has just led to more problems than it's helped.
* Monitor flickers when turned on
* Crashing graphics drivers from time to time
* Fragile logic that doesn't always represent the device state
The test is run if a physical TPM is available or if the environment
variable "TPM_SERVER_RUNNING" is set. In the latter case, the user is
expected to start a TPM simulator on their own, like we do in the Arch
Linux CI script here.
Using the library instead of the command line tools provides a more
stable interface. This implementation only fetches PCR 0 for all
available hash algorithms since this is the only PCR that is actually
used in fwupd.
tpm2_pcrlist has been renamed to tpm2_pcrread in
aedb0291d2
and the output format has changed slightly to include a leading "0x" in
9374bd70f4
Also add an example of the new output format to the self test.
