Multiple devices can be updated from one cabinet archive, and it would be quite
confusing just to print the first device title and then have the progressbar go
from 0..100 multiple times.
Use the existing device-changed signal to set the 'current device' and print a
new header if the device changes during the install phase.
This isn't useful for most people and just takes up space in the logs.
When there is a problem it's typically specifically with a plugin
and at that time we ask them to run the daemon with verbose anyway.
/boot is a special cased directory when using ProtectSystem=full
Due to this, it's marked read only even if it's listed in ReadWritePaths.
Allow folks to use this for their ESP, but they need to create /boot/EFI
in advance of starting fwupd.
Titan Ridge devices may contain multiple controllers so we need to make
sure the supplied NVM image multi controller number matches the
controller in question. This is pretty much same than we had for Alpine
Ridge (X of N) but the difference is that this multi controller
information is found in DROM instead and the location is not fixed.
For this reason we implement a generic DROM entry parser and use it to
dynamically fill in correct location of multi controller entry based on
the controller active firmware.
In addition to that we add a check for the NVM flash size just like we
do for Titan Ridge host.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Titan Ridge has same set of bits than Alpine Ridge telling whether the
Thunderbolt controller is in native or legacy mode. Add validation for
that.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
We need to make sure the Thunderbolt controller and the NVM image agree
with the expected flash memory size.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Add 0x15E8 and 0x15EB Titan Ridge IDs that were previously missed.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Thunderbolt devices typically have a discrete PD (power delivery)
controller and firmware for that controller is part of the NVM image. To
make sure the supplied NVM image provides the necessary PD firmware we
implement a check that compares existence of both PD pointers and fails
the validation if they differ.
Since the PD pointer is part of ARC_PARAMS section we need to populate
that section offset also for hosts (following DROM section).
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
At least with Titan Ridge devices 50 * 20 ms is way too short time
reading nvm_version so most of the time the daemon fails to figure out
the version of the just connected device. To make it work better with
Titan Ridge devices increase the timeout to 50 * 200 ms.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There are other places in the plugin where we read nvm_version and it
can return -EAGAIN as well. To make sure it works consistenly accross
the plugin factor reading nvm_version to a helper function and use instead.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Additionally, if the user specified something invalid, do not autodetect the
ESP but return with a journal error. It seems wrong to ignore what the user
explicitly set and perhaps do something dangerous.
Alternative to https://github.com/hughsie/fwupd/pull/599
In this instance, we define the 'same device' to be a FuDevice that has at
least one matching GUID. We allow the plugins to define which one is 'better'
than other plugins, and use this to only have one FuDevice for the physical
device.
Alternative to https://github.com/hughsie/fwupd/pull/604
With composite CAB files it's difficult to see between devices when packed:
Homepage: http://support.dell.com/
Vendor: Dell Inc.
TrustFlags: none
Unknown Device
Guid: 558d18fa-5530-5fc8-9e4b-de3ee8a5eca7
Homepage: http://support.dell.com/
Vendor: Dell Inc.
TrustFlags: none
Unknown Device
Fix a logic error when testing requirements; what was supposed to happen was
that a the firmware requirements were only processed when we had a FuDevice set
in the FuInstallTask, but instead we were falling through to the handler for
'unknown requirement type'.
Panamera is a newer MST chip with a different flash layout and
multiple MCU running and accessing SPI/EEPROM simultaneously.
The firmware update process has to be run separately for each
SPI/EEPROM region.
Signed-off-by: Ryan Chang <ryan.chang@synaptics.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
- Split up `synapticsmst_device_write_firmware` to smaller more manageable
chunks
- Use `FuDeviceLocker` to ensure that device is in a known state after
update is complete (both in success or failure scenarios)
- Retry the write process up to 10 times in case of DPCD update failures
- Wait for flash clear to settle before writing to EEPROM/SPI
Any previously failed runs or outside tools may adjust the remote
control register leaving the MST controller in a poor state.
If remote control enablement fails, try to disable and then re-enable
before aborting.
As seen by recent testing this is not working every time.
Since e6cda81f we're now building GUIDs that represent all the possibilities
for shared parts so it's not important to set dock type.
Since the Redfish service may use a self-signed certificate without
specifying the hostname, we could have the problem to verify such
certificate. A new option, CACheck, is introduced so that the user can
decide whether to ignore the CA verification or not.
Signed-off-by: Gary Lin <glin@suse.com>
